| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix out_fput in iommufd_fault_alloc()
As fput() calls the file->f_op->release op, where fault obj and ictx are
getting released, there is no need to release these two after fput() one
more time, which would result in imbalanced refcounts:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230
Call trace:
refcount_warn_saturate+0x60/0x230 (P)
refcount_warn_saturate+0x60/0x230 (L)
iommufd_fault_fops_release+0x9c/0xe0 [iommufd]
...
VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd])
WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0
Call trace:
filp_flush+0x3c/0xf0 (P)
filp_flush+0x3c/0xf0 (L)
__arm64_sys_close+0x34/0x98
...
imbalanced put on file reference count
WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138
Call trace:
__file_ref_put+0x100/0x138 (P)
__file_ref_put+0x100/0x138 (L)
__fput_sync+0x4c/0xd0
Drop those two lines to fix the warnings above. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ieee802154: do not leave a dangling sk pointer in ieee802154_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If ieee802154_create() fails later, the allocated sk object is
freed, but the dangling pointer remains in the provided sock object, which
may allow use-after-free.
Clear the sk pointer in the sock object on error. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: array-index-out-of-bounds fix in dtReadFirst
The value of stbl can be sometimes out of bounds due
to a bad filesystem. Added a check with appopriate return
of error code in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix shift-out-of-bounds in dbSplit
When dmt_budmin is less than zero, it causes errors
in the later stages. Added a check to return an error beforehand
in dbAllocCtl itself. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix array-index-out-of-bounds in jfs_readdir
The stbl might contain some invalid values. Added a check to
return error code in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Use disable_delayed_work_sync
This makes use of disable_delayed_work_sync instead
cancel_delayed_work_sync as it not only cancel the ongoing work but also
disables new submit which is disarable since the object holding the work
is about to be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet
This fixes not checking if skb really contains an ACL header otherwise
the code may attempt to access some uninitilized/invalid memory past the
valid skb->data. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: ref-verify: fix use-after-free after invalid ref action
At btrfs_ref_tree_mod() after we successfully inserted the new ref entry
(local variable 'ref') into the respective block entry's rbtree (local
variable 'be'), if we find an unexpected action of BTRFS_DROP_DELAYED_REF,
we error out and free the ref entry without removing it from the block
entry's rbtree. Then in the error path of btrfs_ref_tree_mod() we call
btrfs_free_ref_cache(), which iterates over all block entries and then
calls free_block_entry() for each one, and there we will trigger a
use-after-free when we are called against the block entry to which we
added the freed ref entry to its rbtree, since the rbtree still points
to the block entry, as we didn't remove it from the rbtree before freeing
it in the error path at btrfs_ref_tree_mod(). Fix this by removing the
new ref entry from the rbtree before freeing it.
Syzbot report this with the following stack traces:
BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4314
btrfs_insert_empty_item fs/btrfs/ctree.h:669 [inline]
btrfs_insert_orphan_item+0x1f1/0x320 fs/btrfs/orphan.c:23
btrfs_orphan_add+0x6d/0x1a0 fs/btrfs/inode.c:3482
btrfs_unlink+0x267/0x350 fs/btrfs/inode.c:4293
vfs_unlink+0x365/0x650 fs/namei.c:4469
do_unlinkat+0x4ae/0x830 fs/namei.c:4533
__do_sys_unlinkat fs/namei.c:4576 [inline]
__se_sys_unlinkat fs/namei.c:4569 [inline]
__x64_sys_unlinkat+0xcc/0xf0 fs/namei.c:4569
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
BTRFS error (device loop0 state EA): Ref action 1, root 5, ref_root 5, parent 0, owner 260, offset 0, num_refs 1
__btrfs_mod_ref+0x76b/0xac0 fs/btrfs/extent-tree.c:2521
update_ref_for_cow+0x96a/0x11f0
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: tc358743: Fix crash in the probe error path when using polling
If an error occurs in the probe() function, we should remove the polling
timer that was alarmed earlier, otherwise the timer is called with
arguments that are already freed, which results in a crash.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 0 at kernel/time/timer.c:1830 __run_timers+0x244/0x268
Modules linked in:
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.11.0 #226
Hardware name: Diasom DS-RK3568-SOM-EVB (DT)
pstate: 804000c9 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __run_timers+0x244/0x268
lr : __run_timers+0x1d4/0x268
sp : ffffff80eff2baf0
x29: ffffff80eff2bb50 x28: 7fffffffffffffff x27: ffffff80eff2bb00
x26: ffffffc080f669c0 x25: ffffff80efef6bf0 x24: ffffff80eff2bb00
x23: 0000000000000000 x22: dead000000000122 x21: 0000000000000000
x20: ffffff80efef6b80 x19: ffffff80041c8bf8 x18: ffffffffffffffff
x17: ffffffc06f146000 x16: ffffff80eff27dc0 x15: 000000000000003e
x14: 0000000000000000 x13: 00000000000054da x12: 0000000000000000
x11: 00000000000639c0 x10: 000000000000000c x9 : 0000000000000009
x8 : ffffff80eff2cb40 x7 : ffffff80eff2cb40 x6 : ffffff8002bee480
x5 : ffffffc080cb2220 x4 : ffffffc080cb2150 x3 : 00000000000f4240
x2 : 0000000000000102 x1 : ffffff80eff2bb00 x0 : ffffff80041c8bf0
Call trace:
__run_timers+0x244/0x268
timer_expire_remote+0x50/0x68
tmigr_handle_remote+0x388/0x39c
run_timer_softirq+0x38/0x44
handle_softirqs+0x138/0x298
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x24/0x4c
do_softirq_own_stack+0x1c/0x2c
irq_exit_rcu+0x9c/0xcc
el1_interrupt+0x48/0xc0
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x7c/0x80
default_idle_call+0x34/0x68
do_idle+0x23c/0x294
cpu_startup_entry+0x38/0x3c
secondary_start_kernel+0x128/0x160
__secondary_switched+0xb8/0xbc
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
efi/libstub: Free correct pointer on failure
cmdline_ptr is an out parameter, which is not allocated by the function
itself, and likely points into the caller's stack.
cmdline refers to the pool allocation that should be freed when cleaning
up after a failure, so pass this instead to free_pool(). |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix cred leak in ceph_mds_check_access()
get_current_cred() increments the reference counter, but the
put_cred() call was missing. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer
The AD7923 was updated to support devices with 8 channels, but the size
of tx_buf and ring_xfer was not increased accordingly, leading to a
potential buffer overflow in ad7923_update_scan_mode(). |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix OOB in binder_add_freeze_work()
In binder_add_freeze_work() we iterate over the proc->nodes with the
proc->inner_lock held. However, this lock is temporarily dropped to
acquire the node->lock first (lock nesting order). This can race with
binder_deferred_release() which removes the nodes from the proc->nodes
rbtree and adds them into binder_dead_nodes list. This leads to a broken
iteration in binder_add_freeze_work() as rb_next() will use data from
binder_dead_nodes, triggering an out-of-bounds access:
==================================================================
BUG: KASAN: global-out-of-bounds in rb_next+0xfc/0x124
Read of size 8 at addr ffffcb84285f7170 by task freeze/660
CPU: 8 UID: 0 PID: 660 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #18
Hardware name: linux,dummy-virt (DT)
Call trace:
rb_next+0xfc/0x124
binder_add_freeze_work+0x344/0x534
binder_ioctl+0x1e70/0x25ac
__arm64_sys_ioctl+0x124/0x190
The buggy address belongs to the variable:
binder_dead_nodes+0x10/0x40
[...]
==================================================================
This is possible because proc->nodes (rbtree) and binder_dead_nodes
(list) share entries in binder_node through a union:
struct binder_node {
[...]
union {
struct rb_node rb_node;
struct hlist_node dead_node;
};
Fix the race by checking that the proc is still alive. If not, simply
break out of the iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc_submit: fix race around suspend_pending
Currently in some testcases we can trigger:
xe 0000:03:00.0: [drm] Assertion `exec_queue_destroyed(q)` failed!
....
WARNING: CPU: 18 PID: 2640 at drivers/gpu/drm/xe/xe_guc_submit.c:1826 xe_guc_sched_done_handler+0xa54/0xef0 [xe]
xe 0000:03:00.0: [drm] *ERROR* GT1: DEREGISTER_DONE: Unexpected engine state 0x00a1, guc_id=57
Looking at a snippet of corresponding ftrace for this GuC id we can see:
162.673311: xe_sched_msg_add: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3
162.673317: xe_sched_msg_recv: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3
162.673319: xe_exec_queue_scheduling_disable: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0
162.674089: xe_exec_queue_kill: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0
162.674108: xe_exec_queue_close: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0
162.674488: xe_exec_queue_scheduling_done: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0
162.678452: xe_exec_queue_deregister: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa1, flags=0x0
It looks like we try to suspend the queue (opcode=3), setting
suspend_pending and triggering a disable_scheduling. The user then
closes the queue. However the close will also forcefully signal the
suspend fence after killing the queue, later when the G2H response for
disable_scheduling comes back we have now cleared suspend_pending when
signalling the suspend fence, so the disable_scheduling now incorrectly
tries to also deregister the queue. This leads to warnings since the queue
has yet to even be marked for destruction. We also seem to trigger
errors later with trying to double unregister the same queue.
To fix this tweak the ordering when handling the response to ensure we
don't race with a disable_scheduling that didn't actually intend to
perform an unregister. The destruction path should now also correctly
wait for any pending_disable before marking as destroyed.
(cherry picked from commit f161809b362f027b6d72bd998e47f8f0bad60a2e) |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix NULL pointer dereference in object->file
At present, the object->file has the NULL pointer dereference problem in
ondemand-mode. The root cause is that the allocated fd and object->file
lifetime are inconsistent, and the user-space invocation to anon_fd uses
object->file. Following is the process that triggers the issue:
[write fd] [umount]
cachefiles_ondemand_fd_write_iter
fscache_cookie_state_machine
cachefiles_withdraw_cookie
if (!file) return -ENOBUFS
cachefiles_clean_up_object
cachefiles_unmark_inode_in_use
fput(object->file)
object->file = NULL
// file NULL pointer dereference!
__cachefiles_write(..., file, ...)
Fix this issue by add an additional reference count to the object->file
before write/llseek, and decrement after it finished. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Prevent recovery invocation during probe and resume
Refactor IPC send and receive functions to allow correct
handling of operations that should not trigger a recovery process.
Expose ivpu_send_receive_internal(), which is now utilized by the D0i3
entry, DCT initialization, and HWS initialization functions.
These functions have been modified to return error codes gracefully,
rather than initiating recovery.
The updated functions are invoked within ivpu_probe() and ivpu_resume(),
ensuring that any errors encountered during these stages result in a proper
teardown or shutdown sequence. The previous approach of triggering recovery
within these functions could lead to a race condition, potentially causing
undefined behavior and kernel crashes due to null pointer dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
This patch also splits the code to the disconnect and the free phases;
the former is called immediately at the USB disconnect callback while
the latter is called from the card destructor. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix overflow in __rb_map_vma
An overflow occurred when performing the following calculation:
nr_pages = ((nr_subbufs + 1) << subbuf_order) - pgoff;
Add a check before the calculation to avoid this problem.
syzbot reported this as a slab-out-of-bounds in __rb_map_vma:
BUG: KASAN: slab-out-of-bounds in __rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058
Read of size 8 at addr ffff8880767dd2b8 by task syz-executor187/5836
CPU: 0 UID: 0 PID: 5836 Comm: syz-executor187 Not tainted 6.13.0-rc2-syzkaller-00159-gf932fb9b4074 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:489
kasan_report+0xd9/0x110 mm/kasan/report.c:602
__rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058
ring_buffer_map+0x56e/0x9b0 kernel/trace/ring_buffer.c:7138
tracing_buffers_mmap+0xa6/0x120 kernel/trace/trace.c:8482
call_mmap include/linux/fs.h:2183 [inline]
mmap_file mm/internal.h:124 [inline]
__mmap_new_file_vma mm/vma.c:2291 [inline]
__mmap_new_vma mm/vma.c:2355 [inline]
__mmap_region+0x1786/0x2670 mm/vma.c:2456
mmap_region+0x127/0x320 mm/mmap.c:1348
do_mmap+0xc00/0xfc0 mm/mmap.c:496
vm_mmap_pgoff+0x1ba/0x360 mm/util.c:580
ksys_mmap_pgoff+0x32c/0x5c0 mm/mmap.c:542
__do_sys_mmap arch/x86/kernel/sys_x86_64.c:89 [inline]
__se_sys_mmap arch/x86/kernel/sys_x86_64.c:82 [inline]
__x64_sys_mmap+0x125/0x190 arch/x86/kernel/sys_x86_64.c:82
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The reproducer for this bug is:
------------------------8<-------------------------
#include <fcntl.h>
#include <stdlib.h>
#include <unistd.h>
#include <asm/types.h>
#include <sys/mman.h>
int main(int argc, char **argv)
{
int page_size = getpagesize();
int fd;
void *meta;
system("echo 1 > /sys/kernel/tracing/buffer_size_kb");
fd = open("/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw", O_RDONLY);
meta = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, page_size * 5);
}
------------------------>8------------------------- |
| In the Linux kernel, the following vulnerability has been resolved:
net: renesas: rswitch: avoid use-after-put for a device tree node
The device tree node saved in the rswitch_device structure is used at
several driver locations. So passing this node to of_node_put() after
the first use is wrong.
Move of_node_put() for this node to exit paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix use-after-free in device_for_each_child()
Syzbot has reported the following KASAN splat:
BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0
Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980
CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
? device_for_each_child+0x18f/0x1a0
print_report+0x13a/0x4cb
? __virt_addr_valid+0x5e/0x590
? __phys_addr+0xc6/0x150
? device_for_each_child+0x18f/0x1a0
kasan_report+0xda/0x110
? device_for_each_child+0x18f/0x1a0
? __pfx_dev_memalloc_noio+0x10/0x10
device_for_each_child+0x18f/0x1a0
? __pfx_device_for_each_child+0x10/0x10
pm_runtime_set_memalloc_noio+0xf2/0x180
netdev_unregister_kobject+0x1ed/0x270
unregister_netdevice_many_notify+0x123c/0x1d80
? __mutex_trylock_common+0xde/0x250
? __pfx_unregister_netdevice_many_notify+0x10/0x10
? trace_contention_end+0xe6/0x140
? __mutex_lock+0x4e7/0x8f0
? __pfx_lock_acquire.part.0+0x10/0x10
? rcu_is_watching+0x12/0xc0
? unregister_netdev+0x12/0x30
unregister_netdevice_queue+0x30d/0x3f0
? __pfx_unregister_netdevice_queue+0x10/0x10
? __pfx_down_write+0x10/0x10
unregister_netdev+0x1c/0x30
bnep_session+0x1fb3/0x2ab0
? __pfx_bnep_session+0x10/0x10
? __pfx_lock_release+0x10/0x10
? __pfx_woken_wake_function+0x10/0x10
? __kthread_parkme+0x132/0x200
? __pfx_bnep_session+0x10/0x10
? kthread+0x13a/0x370
? __pfx_bnep_session+0x10/0x10
kthread+0x2b7/0x370
? __pfx_kthread+0x10/0x10
ret_from_fork+0x48/0x80
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 4974:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_noprof+0x1d1/0x440
hci_alloc_dev_priv+0x1d/0x2820
__vhci_create_device+0xef/0x7d0
vhci_write+0x2c7/0x480
vfs_write+0x6a0/0xfc0
ksys_write+0x12f/0x260
do_syscall_64+0xc7/0x250
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 4979:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x4f/0x70
kfree+0x141/0x490
hci_release_dev+0x4d9/0x600
bt_host_release+0x6a/0xb0
device_release+0xa4/0x240
kobject_put+0x1ec/0x5a0
put_device+0x1f/0x30
vhci_release+0x81/0xf0
__fput+0x3f6/0xb30
task_work_run+0x151/0x250
do_exit+0xa79/0x2c30
do_group_exit+0xd5/0x2a0
get_signal+0x1fcd/0x2210
arch_do_signal_or_restart+0x93/0x780
syscall_exit_to_user_mode+0x140/0x290
do_syscall_64+0xd4/0x250
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In 'hci_conn_del_sysfs()', 'device_unregister()' may be called when
an underlying (kobject) reference counter is greater than 1. This
means that reparenting (happened when the device is actually freed)
is delayed and, during that delay, parent controller device (hciX)
may be deleted. Since the latter may create a dangling pointer to
freed parent, avoid that scenario by reparenting to NULL explicitly. |
