| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache
Make sure resources are not improperly shared in the op cache and
cause instruction corruption this way. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix false positive on permission events
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix error unwind in mana_ib_create_qp_rss()
Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal
destroy path cleans it up. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix race between ICReq handling and queue teardown
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: Use cached t->net in ip6erspan_changelink().
After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of
rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns
ip6gre hash via link_net. ip6erspan_changelink() was not converted in
that series and still uses dev_net(dev), which diverges from the
device's creation netns after IFLA_NET_NS_FD migration.
This re-inserts the tunnel into the wrong per-netns hash. The
original netns keeps a stale entry. When that netns is later
destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a
slab-use-after-free reported by KASAN, followed by a kernel BUG at
net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify().
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net).
ip6gre_changelink() earlier in the same file already uses the cached
t->net; only ip6erspan_changelink() has the wrong shape. |
| A flaw was found in Keycloak. A remote attacker with high privileges, such as a realm administrator configuring a malicious Lightweight Directory Access Protocol (LDAP) server or an attacker compromising an upstream LDAP server, could exploit this vulnerability. By sending a malformed LDAP password policy response during a password authentication request, the attacker can trigger an OutOfMemoryError. This causes the Keycloak Java Virtual Machine (JVM) to terminate, leading to a denial of service (DoS) for all realms on the affected node. |
| A flaw was found in Keycloak, an open-source identity and access management solution. When a user account is temporarily locked due to repeated failed login attempts, an attacker with valid client credentials can exploit the Client-Initiated Backchannel Authentication (CIBA) flow to bypass this brute-force protection. This allows continued authentication attempts and token issuance even when the account should be locked, potentially enabling further unauthorized access attempts. |
| A flaw was found in Keycloak's Client Policies, specifically within the `org.keycloak.protocol.oidc` component. When certain condition providers (client-type, client-roles, client-attributes, client-scopes) are used to enforce security restrictions, the `reject-ropc-grant` executor is silently bypassed. This allows an unauthenticated remote attacker to obtain tokens via a Resource Owner Password Credentials (ROPC) grant, even when a policy is explicitly configured to block it. This bypass can lead to unauthorized access and information disclosure. |
| A flaw was found in Keycloak. When a JSON Web Encryption (JWE) encrypted request object is submitted, Keycloak may incorrectly process unsigned claims if the decrypted content is raw JSON, bypassing the configured signature policy. This allows a remote attacker to submit unauthorized claims, leading to a compromise of data integrity within the OpenID Connect (OIDC) authorization flow. While a redirect URI allowlist acts as a compensating control, this vulnerability violates OIDC Core and Financial-grade API (FAPI) signing requirements. |
| A flaw was found in pip, the package installer for Python. A remote attacker can exploit this vulnerability by tricking a victim into installing a malicious Python wheel. This wheel contains specially crafted entry-point names that use directory traversal or absolute paths. This allows pip to write generated script wrappers outside the intended installation directory, leading to arbitrary file overwrite. This can severely impact system integrity and availability, and in certain scenarios, may lead to arbitrary code execution. |
| BentoML is a Python library for building online serving systems optimized for AI apps and model inference. Prior to 1.4.39, src/bentoml/_internal/container/frontend/dockerfile/templates/base_v2.j2 interpolates docker.base_image raw with no escaping, newline filtering, or validation. A malicious bento.yaml with a multi-line docker.base_image value smuggles arbitrary Dockerfile directives into the generated Dockerfile, and bentoml containerize then runs docker build which executes the injected RUN directives on the victim host. This vulnerability is fixed in 1.4.39. |
| bird-lg-go is a BIRD looking glass in Go. Prior to 1.4.5, the apiHandler (and similarly webHandlerTelegramBot) processes user-provided JSON payloads by directly using json.NewDecoder(r.Body).Decode(&request) without restricting the maximum read size. An unauthenticated remote attacker can stream an extremely large, endless JSON payload (e.g., several Gigabytes of padding) over a single TCP connection. Because Go's JSON decoder attempts to allocate memory for the entire parsed structure, this rapidly exhausts the host's physical RAM or container limits, leading to an unrecoverable fatal error: runtime: out of memory. This vulnerability is fixed in 1.4.5. |
| The Everest Forms – Contact Form, Payment Form, Quiz, Survey & Custom Form Builder plugin for WordPress is vulnerable to unauthorized email sending due to a missing capability check on the send_test_email() function in all versions up to, and including, 3.4.7. This makes it possible for authenticated attackers, with Subscriber-level access and above, to send test emails to arbitrary addresses from the server. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix end-of-list detection in cgroup_storage_get_next_key()
list_next_entry() never returns NULL -- when the current element is the
last entry it wraps to the list head via container_of(). The subsequent
NULL check is therefore dead code and get_next_key() never returns
-ENOENT for the last element, instead reading storage->key from a bogus
pointer that aliases internal map fields and copying the result to
userspace.
Replace it with list_entry_is_head() so the function correctly returns
-ENOENT when there are no more entries. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix re-decryption of RESPONSE packets
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE. |
| A NULL pointer dereference in GPAC MP4Box: when parsing certain truncated MP4 files, an unknown/invalid stsd entry can result in missing descriptor fields (e.g., codec/mime/profile strings). gf_media_map_esd then calls strlen() on a NULL pointer, triggering a crash (ASan SEGV). |
| IBM Aspera High-Speed Transfer Endpoint 3.7.4 through 4.4.7 Fix Pack 1 and IBM Aspera High-Speed Transfer Server 3.7.4 through 4.4.7 Fix Pack 1 and IBM Aspera High-Speed Transfer Endpoint are affected by a buffer overflow in the asperahttpd component. This vulnerability could be exploited to cause a denial of service and potentially lead to authentication bypass or remote code execution. |
