| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix parent socket leak in iso_conn_ready()
iso_get_sock() returns the parent socket with a reference held, which is
dropped by sock_put() once the child socket has been set up. The error
path taken when iso_sock_alloc() fails only calls release_sock() and
returns, leaking the reference and thus the parent socket itself.
Drop the reference on that path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate TX skb length in send_sync
btintel_pcie_prepare_tx() copies skb->len bytes into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy.
Oversized packets are currently rejected only in
btintel_pcie_send_frame(); any future caller of
btintel_pcie_send_sync() would silently overflow the DMA buffer.
Add the bounds check in btintel_pcie_send_sync() itself, right
before skb_push() and the DMA copy. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().
tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for
TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around
sk->sk_forward_alloc").
However, there is still a small race window between tcp_v6_rcv()
and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN
to TCP_CLOSE, causing skb_clone_and_charge_r() to be called
locklessly and resulting in the splat below. [0]
Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well.
This is fine for non-listeners because tcp_rcv_state_process()
drops skb for TCP_CLOSE and opt_skb was freed immediately anyway.
[0]:
sk->sk_forward_alloc
WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28
Modules linked in:
CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162
Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff ff e8 c2 5b 83 f8 90 0f 0b 90 e9 c5 fe ff ff e8 b4 5b 83 f8 90 <0f> 0b 90 e9 04 ff ff ff e8 a6 5b 83 f8 90 0f 0b 90 e9 65 fe ff ff
RSP: 0018:ffffc90000677bb8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880117bde80 RCX: ffffffff8957eb41
RDX: ffff88801dad5d00 RSI: ffffffff8957ec3c RDI: 0000000000000005
RBP: 00000000fffff000 R08: ffffffff8957eb41 R09: 00000000fffff000
R10: 0000000000000005 R11: 0000000000000000 R12: dffffc0000000000
R13: ffff8880117bdf10 R14: ffffffff81c08eb7 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8880d7ae5000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f93a1021138 CR3: 00000000207a9000 CR4: 0000000000350ef0
Call Trace:
<TASK>
__sk_destruct+0x82/0xae0 net/core/sock.c:2356
rcu_do_batch kernel/rcu/tree.c:2645 [inline]
rcu_core+0x59c/0x1100 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9b0 kernel/softirq.c:622
run_ksoftirqd kernel/softirq.c:1076 [inline]
run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068
smpboot_thread_fn+0x458/0xc80 kernel/smpboot.c:160
kthread+0x396/0x4a0 kernel/kthread.c:436
ret_from_fork+0x8e0/0xe40 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: disable the stats poll on teardown
mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and
nothing stops it until dsa_register_switch() has returned an error to
mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a
poll that fires once .setup or a later step of dsa_tree_setup() has
failed walks freed ports. On shutdown the user ports stay registered,
and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic
with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag
before it was set queues the poll after cancel_delayed_work_sync() has
returned.
Arm the poll once .setup has succeeded and stop it from a .teardown op,
which DSA calls on unregister and after a failed registration, in both
cases before it frees the ports. Use disable_delayed_work_sync() there
and in shutdown(): it drains a running poll as the cancel did and turns
every later attempt to queue the work into a no-op, so the re-arm
cannot bring the poll back. remove() and the probe error path only set
WORK_STOPPED, which crc_err_work tests before it walks the ports. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
__xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM
reference. Shrinking a bo outside system memory invalidates its GPU
mappings, which needs the device resumed, so while it is runtime
suspended the page table zap trips an assert and the TLB invalidation
returns -ENODEV:
WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe]
xe_bo_shrink+0x20f/0x2b0 [xe]
__xe_shrinker_walk+0x174/0x410 [xe]
xe_shrinker_scan+0x10c/0x1e0 [xe]
do_shrink_slab+0x176/0x7e0
drop_caches_sysctl_handler+0x9c/0xf0
Take a reference before walking a memory type other than XE_PL_SYSTEM
and stop there if it cannot be acquired. Reuse the shrinker's existing
acquire path, which resumes the device directly where reclaim allows
that and otherwise queues the PM worker for a later scan. Stop the walk
once the scan target is met, so a satisfied scan does not wake the
device. System memory is still reclaimed while the device is suspended.
Gate this on xe_device_is_l2_flush_optimized(), the same condition under
which xe_bo_trigger_rebind() issues the invalidation for a non-fault-mode
vm, so reclaim is unaffected elsewhere. The System CCS copy already has
its own reference in xe_bo_shrink().
Only a non-fault-mode vm can reach this, since a fault-mode vm requires
LR mode and that holds a runtime PM reference for the vm's lifetime.
Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is
runtime suspended.
v2: simplify needs_rpm check. (Matt)
retarget Fixes tag since the issue occurs with the non-fault-mode
path added by 4e7ebff69aed.
v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas)
v4: stop the walk once the scan target is met. (Sashiko)
v5: rebase on the freed page accounting fix. (Sashiko)
v6: reuse the shrinker acquire path so runtime pm can be resumed
directly instead of always queueing a worker. (Thomas)
v7: replace xe_pm_runtime_put() with xe_shrinker_runtime_pm_put(). (Thomas)
(cherry picked from commit 628f92b28bf4c371c10207daf6fc4caee0c0db2e) |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of NFSEXP_PNFS in the netlink codepath
The rework of how block layouts were checked moved the check for
NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That
patch didn't account for the new call in nfsd4_setup_layout_type(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets after the final
purge. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use drmm_kms_helper_poll_init() so polling is finalized with the device,
as other drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: devres: fix race between concurrent revokers
There is a potential race condition when two paths try to revoke a
Devres concurrently.
The driver core's devres_release_all() calls Revocable::revoke() via the
release callback, while Devres::drop() calls revoke_nosync() on another
CPU.
The revoker that does not claim the is_available swap returns
immediately, but the revoker that did may still be executing
drop_in_place() on the inner data. This can cause a use-after-free when
the other revoker's caller proceeds to drop adjacent resources that
drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with
SGTable freeing the backing sg_table and pages).
Fix this by adding a Completion. The release callback signals the
Completion after revoke() finishes, and Devres::drop() waits for it when
it loses the is_available swap. This ensures the wrapped object is fully
torn down before Devres::drop() returns. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: initialise workingset state before folio split
xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but
__folio_split() leaves the xa_state's xa_lru unset. That lets a live,
memcg-charged xa_node exist without being linked into the mapping's
shadow_nodes list_lru; when reclaim later walks the list_lru it trips
VM_WARN_ON(!css_is_dying()).
Use mapping_set_update() to install both the workingset update callback
and the shadow_nodes list_lru on the xa_state. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Also allocate private hash on vfork()
As Jann demonstrated, it is entirely feasible to access the mm through vfork().
Therefore we need to allocate a private hash on vfork() as well as any other
CLONE_VM user.
Specifically, it must be avoided to have (private) futex waiters before
allocating the private hash. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: do not free nlk->groups while lockless readers can use it
netlink_realloc_groups() uses krealloc() under netlink_table_grab().
Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old
bitmap is freed immediately.
Two readers of nlk->groups / nlk->ngroups do not hold the netlink
table lock:
1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the
rhashtable walk in __netlink_diag_dump(), which only holds RCU.
Only the mc_list part of the dump takes nl_table_lock.
2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been
lockless since commit 21e4902aea80 ("netlink: Lockless lookup with
RCU grace period in socket release").
Both can read a freed buffer, and sk_diag_dump_groups() can also read
past the end of the old (smaller) buffer if it happens to load the old
@groups pointer together with the new @ngroups value, copying the
result into a NETLINK_DIAG_GROUPS attribute.
This is the same class of bug that commit f773608026ee ("netlink:
access nlk groups safely in netlink bind and getname") fixed for bind()
and getname(); these two readers were missed. Simply grabbing the table
lock in sk_diag_dump_groups() is not an option, because it is also
called with nl_table_lock already held from the mc_list section of the
dump.
Make the lockless readers safe instead:
- Allocate a new bitmap and free the old one after an RCU grace period,
instead of relying on the implicit kfree() done by krealloc().
- Publish @groups before @ngroups, both with release semantics, and have
the lockless readers load @ngroups first. A reader can then never pair
the new (bigger) size with the old (smaller) buffer, and a reader
picking up the new pointer while still seeing the old size is
guaranteed to see the initialized bitmap.
netlink_realloc_groups() is called from process context (bind() and
setsockopt()), so kfree_rcu_mightsleep() can be used, once the table
has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr
When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not
set, a drm_pending_vblank_event will be allocated. If later, there is an
allocation failure or another failure at setup_out_fence(), that event
will not have base.fence set and it will not be released at
complete_signaling().
Release the event and set crtc_state->event to NULL just like in the
DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at
drm_event_reserve_init(). That is, prepare_signaling() releases the
event and there is nothing to be done at complete_signaling(). Use
drm_event_cancel_free() as that will also undo drm_event_reserve_init()
in case it has been called. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: pxa: fix double counting of the hw descriptors
pxad_alloc_desc() was converted from
kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT)
to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc
itself - but only where the compiler has __builtin_counted_by_ref(), so
from gcc 15.1 or clang 22.1 on. The loop below it still increments
nb_desc, which makes it come out doubled there and correct elsewhere.
nb_desc is what pxad_free_desc() iterates over and what
set_updater_desc() indexes from, so set it explicitly and drop the
increment. The error path has to lower it to the number of descriptors
allocated so far, otherwise pxad_free_desc() would free entries that were
never allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: reset the CSA state when leaving
ifmsh->csa is allocated in ieee80211_mesh_csa_beacon() and only freed
in ieee80211_mesh_finish_csa(), i.e. when the channel switch completes.
Leaving the mesh while a switch is still pending therefore leaks it.
Additionally, ifmsh->csa_role and ifmsh->chsw_ttl have their state leak
in this case, so things can get mixed up in addition to the memory
leak.
Refactor the reset and call it in ieee80211_stop_mesh() to fix it all. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't allow injecting frames wider than the chanctx
Frames injected on a monitor interface can carry a radiotap
field requesting a bandwidth, which mac80211 passes down to
the driver regardless of the the actual operational bandwidth.
If the bandwidth requested is too wide, that triggers a warning
in hwsim:
WARN_ON(hwsim_get_chanwidth(bw) > hwsim_get_chanwidth(confbw))
Drop such frames entirely instead since they cannot be sent. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't offload TC setup on AP_VLAN interfaces
AP_VLAN interfaces are purely virtual, so don't try to offload
TC setup to drivers. We can't really use the AP interface either
since we may not know it all the time, and it could technically
even change.
Just reject the TC offload so things get done in software. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: check IP header size in cfg80211_classify8021d()
A frame that looks like IP can be transmitted, but be too short, so
the DS field is read incorrectly:
BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180
__ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304
ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538
...
packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:3108
Use skb_header_pointer() like the MPLS case. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/IPoIB: Avoid restoring OPER_UP after multicast flush
ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to
prevent multicast joins while ipoib_mcast_dev_flush() is running, and
restores the flag afterwards if it was previously set.
This restore races with ipoib_ib_dev_down(). If the interface is brought
down while the flush is in progress, ipoib_ib_dev_down() clears
IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device
has already gone down.
Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race
aware"), ipoib_mcast_carrier_on_task() relies on IPOIB_FLAG_OPER_UP
being cleared to terminate its rtnl_trylock() retry loop. If the flag is
left set after shutdown, the workqueue retries forever, causing teardown
to deadlock when ipoib_ndo_uninit() waits in destroy_workqueue() while
holding RTNL.
Instead of overloading IPOIB_FLAG_OPER_UP to block multicast joins
during a light flush, introduce a dedicated IPOIB_FLAG_MCAST_FLUSH flag.
Use it together with IPOIB_FLAG_OPER_UP to determine whether multicast
joins are allowed, avoiding the race with device shutdown. |
