| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A stored SQL injection vulnerability in Koha through 24.11.17, 25.05.12, 25.11.06, and 26.05.01 allows authenticated staff with the borrowers => edit_borrowers permission to cause a time-based denial of service by storing a SQL payload in a patron lang field. The value is concatenated raw into a subquery in Koha::AdditionalContents->search_for_display when an issue slip is printed for the affected patron. The 25-character column length limits exploitation to timing attacks; data extraction is not practical. The stored payload executes on each subsequent issue-slip print, scaling linearly with the SLEEP value and the number of slip-news rows. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: fix report_work leak on backbone_gw purge
batadv_bla_purge_backbone_gw() removes stale backbone gateway entries,
but fails to properly handle their associated report_work:
- If report_work is running, the purge must wait for it to finish before
freeing the backbone_gw, otherwise the worker may access freed memory
(e.g. bat_priv).
- If report_work is pending, the purge must cancel it and release the
reference held for that pending work item.
The previous implementation called hlist_for_each_entry_safe() inside a
spin_lock_bh() section, but cancel_work_sync() may sleep and therefore
cannot be called from within a spinlock-protected region.
Restructure the loop to handle one entry per spinlock critical section:
acquire the lock, find the next entry to purge, remove it from the hash
list, then release the lock before calling cancel_work_sync() and
dropping the hash_entry reference. Repeat until no more entries require
purging. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: set fwnode->secondary to NULL in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ti-qspi: fix use-after-free after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to clear the DMA channel pointer also if buffer allocation
fails to avoid passing a pointer to the released channel to the DMA
engine (or trying to free the channel a second time on late probe errors
or driver unbind).
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch. |
| ERPNext is a free and open source Enterprise Resource Planning tool. Prior to 15.112.0 and 16.22.0, the merge_account, pause_job_for_doc, trigger_job_for_doc, change_release_date, and update_cost_center functions across erpnext/accounts/doctype/account/account.py, erpnext/accounts/doctype/process_payment_reconciliation/process_payment_reconciliation.py, erpnext/accounts/doctype/purchase_invoice/purchase_invoice.py, and erpnext/accounts/utils.py omit required write permission checks, allowing authenticated limited users to modify protected data beyond their roles. This issue is fixed in versions 15.112.0 and 16.22.0. |
| ERPNext is a free and open source Enterprise Resource Planning tool. Prior to 15.111.0 and 16.22.0, the send_auto_email function in erpnext/accounts/doctype/process_statement_of_accounts/process_statement_of_accounts.py lacks a Process Statement Of Accounts permission check, allowing an authenticated low-privilege user to trigger automated emails outside the permitted role. This issue is fixed in versions 15.111.0 and 16.22.0. |
| Craft CMS 5.0.0-RC1 through 5.10.5 contains an incorrect authorization vulnerability. A control-panel user holding only the viewCategories permission (without saveCategories) for a category group can permanently modify that group's category structure — reordering and re-parenting categories — via the structures/move-element action. The structureEditable flag is computed from the view permission rather than the save permission, and the StructuresController authorizes the mutating action on that read-time session grant without a save re-check. Because a category's URI is derived from its position in the structure, moving a category changes its URL and those of its descendants and can corrupt navigation menus built from the category taxonomy. The issue is fixed in 5.10.6. |
| Cachet through 2.4.1 contains a server-side template injection vulnerability in incident template rendering that allows authenticated users to execute arbitrary PHP code. Attackers can create malicious incident templates with Blade directives or Twig filters that execute system commands when incidents are created, achieving remote code execution as the web server process. |
| An SQL injection vulnerability in Koha through 24.11.17, 25.05.12, 25.11.06, and 26.05.01 allows authenticated staff with the acquisition => order_receive permission to read arbitrary database contents via the orderby request parameter in acqui/parcels.pl. The parameter is passed to C4::Acquisition::GetInvoices, which allow-lists the column name but concatenates the direction token raw into the SQL ORDER BY clause without validation. Exploitation is blind (time-based) in production and allows extraction of patron PII, staff bcrypt password hashes, and two-factor secrets. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Don't queue workqueue handlers to never-online CPUs
While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Add lock protection to lm90_alert
Sashiko reports:
lm90_alert() executes in the smbus alert context and calls
lm90_update_confreg() to disable the hardware alert line, without
acquiring hwmon_lock.
Concurrently, sysfs write operations (such as lm90_write_convrate) hold
the hwmon_lock, temporarily modify data->config, and then restore it.
If an alert interrupt occurs concurrently with a sysfs write, the sysfs
path will overwrite the alert handler's modifications to data->config
and the hardware register.
This unintentionally re-enables the hardware alert line while the alarm is
still active, causing an interrupt storm.
Add the missing lock to lm90_alert() to solve the problem. |
| An SQL injection vulnerability in Friendica through the 2026.08-dev branch allows unauthenticated remote attackers to execute arbitrary SQL statements via the photo-view order parameter. The parameter is concatenated unescaped into a SHOW COLUMNS query via a bare PDO::query() call, enabling stacked statement injection. An unauthenticated attacker can read, modify, or delete the entire database. |
| An SQL injection vulnerability in CiviCRM through 6.18.alpha1 allows authenticated staff to read the entire database via the contact search RLIKE clause. The clause concatenates a user-supplied value into the SQL query without sanitization. An attacker with staff-level access can exfiltrate all database contents including donor and member records. |
| An SQL injection vulnerability in e107 2.4.0 allows unauthenticated remote attackers to execute arbitrary SQL via the news item page ID parameter. The parameter is concatenated without escaping into a SQL WHERE clause. An unauthenticated attacker can read, modify, or delete all database contents including administrator credentials. |
| A stored SQL injection vulnerability in Koha through 24.11.17, 25.05.12, 25.11.06, and 26.05.01 allows authenticated staff with the tools => items_batchmod permission to read arbitrary database contents by storing a SQL payload in the agefield value of an automatic item modification rule. The agefield value is stored verbatim to the system preference and later interpolated without parameterization into a SQL query in C4::Items::ToggleNewStatus (line 1228) when the scheduled cron job executes. The injection is SELECT-only under standard MariaDB/MySQL DBI single-statement execution; a time-based SLEEP payload is also achievable via the cron trigger. An attacker can read the entire Koha database including patron PII and staff bcrypt password hashes. |
| A stored SQL injection vulnerability in Koha through 24.11.17, 25.05.12, 25.11.06, and 26.05.01 allows authenticated staff with the tools => label_creator permission to execute arbitrary SQL via the image_name field of a patron card layout. The image_name value is stored verbatim in the layout XML and later concatenated raw into a SQL query in patroncards/create-pdf.pl when a patron card batch is printed. An attacker can read the entire Koha database including patron PII and staff bcrypt password hashes via error-based or time-based blind injection. |
| Vault’s ACL policy engine did not consistently enforce a wildcard (glob) deny rule against LIST requests made with a trailing slash on the denied path. This may allow a token holding a broader allow rule alongside a narrower wildcard deny rule to enumerate the names of entries beneath a path it was intended to be denied access to. This vulnerability (CVE-2026-12624) is fixed in Vault Community Edition 2.0.3 and Vault Enterprise 2.0.3, 1.21.8, 1.20.13, and 1.19.19. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: fix use-after-free in orig_node RCU release
batadv_mcast_purge_orig() removes entries from RCU-protected hlists but
does not wait for an RCU grace period before returning. Concurrent RCU
readers may still accesses references to those entries at the point of
removal. RCU-protected readers trying to operate on entries like
orig->mcast_want_all_ipv6_node will then access already freed memory.
Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(),
just before the call_rcu() invocation. This ensures RCU readers that were
active at purge time have drained before the orig_node memory is reclaimed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix use-after-free of CPU job query arrays on error path
The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and
performance query arrays after v3d_job_cleanup(), which drops the job's
last reference and frees cpu_job. Reading cpu_job at that point is a
use-after-free. Also, on the early v3d_job_init() failure path, it is a
NULL dereference, since v3d_job_deallocate() zeroes the local pointer.
In the success path, the arrays are released from the scheduler's
.free_job callback, but on the error path, they are freed manually, as
the job was never pushed to the scheduler. While the success path deals
with this correctly, the fail path doesn't.
On top of that, the manual kvfree() calls only free the array storage;
they don't drm_syncobj_put() the per-query syncobjs that
v3d_timestamp_query_info_free() and v3d_performance_query_info_free()
release on the success path. So the same fail path that triggers the
use-after-free also leaks one syncobj reference per query.
Unify the CPU job teardown into the CPU job's kref destructor, mirroring
v3d_render_job_free(). The scheduler's .free_job slot reverts to the
generic v3d_sched_job_free() and the fail label drops the manual
kvfree() calls, leaving a single teardown path that is reached from both
the scheduler and the ioctl error path. That removes the use-after-free,
the NULL dereference, and the syncobj leak by construction. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 7.10.14, 8.0.8, 8.1.7, 8.2.7, 8.3.7, 8.4.5, 8.5.2, and 8.6.1, the stream-notify-user stream in the WebSocket protocol allows an authenticated user to write arbitrary notification bodies because the sender is not checked, and the client-side UI can create an ephemeral fake message in another user's currently open chat. This issue is fixed in versions 7.10.14, 8.0.8, 8.1.7, 8.2.7, 8.3.7, 8.4.5, 8.5.2, and 8.6.1. |
