| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When kuma-dp is started against an HTTPS control plane and the operator did not pass a CA certificate, the data plane connects with TLS peer verification disabled, and the dataplane authentication token is sent over that unverified connection.
An on-path actor can intercept the dataplane authentication token and impersonate the control plane to the data plane, injecting a forged bootstrap configuration and taking over the proxy. |
| MongoDB SQL Schema Builder CLI records its startup configuration to standard output and, when file logging is enabled, to a log file on disk. Certain connection settings were written without redaction, so authentication material supplied by the operator could appear in plaintext in that diagnostic output. A local user with read access to the terminal session or the log directory, or anyone with access to a location where those logs are subsequently collected, could obtain those values. |
| MongoDB Schema Manager and MongoDB Atlas SQL ODBC Driver do not validate the scheme of the authorization and token endpoints returned by an OIDC issuer's discovery document. A user induced to connect to an uncontrolled MongoDB deployment using MONGODB-OIDC authentication may have an uncontrolled URI dispatched to their operating system's default protocol handler, potentially exposing credentials or, under certain conditions, resulting in code execution in the user's context. |
| NextAuth.js provides authentication for Next.js. Prior to @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32, the exported getToken() helper in the next-auth/jwt and @auth/core/jwt modules can throw an uncaught exception when it reads a malformed Authorization: Bearer header. When no session cookie is present, getToken() URL-decodes the bearer value before validating it, and malformed percent encoding causes decodeURIComponent() to throw instead of treating the token as invalid. Because getToken() is commonly called in API routes, middleware, and server-side request handlers, a single unauthenticated request can trigger an unhandled exception in code paths that authenticate requests, causing a per-request denial of service without exposing tokens, sessions, or other data and without bypassing authentication. This issue is fixed in @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32. |
| NextAuth.js provides authentication for Next.js. Prior to@auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32, Auth.js stores the OAuth/OIDC anti-CSRF checks state, nonce, and the PKCE verifier in global cookies that are not bound to the provider that created them. On callback, a check value minted during a sign-in started with one provider can satisfy the callback for a different provider because the stored cookie is not verified against the callback provider's identity, including the provider ID, issuer, client ID, or redirect URI. In a multi-provider application that permits account linking while logged in, when one provider's authorization request is observable and a target provider callback can be satisfied without a PKCE verifier, an attacker can lure a victim into starting a legitimate same-origin flow and link the attacker's target-provider account to the victim's Auth.js user. The linked provider grants the attacker persistent sign-in to the victim's account, while cross-site request forgery alone is insufficient. This issue is fixed in @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32. |
| A missing bounds check when parsing stored procedure parameter metadata in the MongoDB BI Connector ODBC Driver can result in an out-of-bounds write in the client application process. Triggering this issue requires control over the server the driver connects to, or the ability to respond in its place, in order to return malformed metadata. The resulting memory corruption may cause the client application to terminate abnormally or, under certain conditions, execute unintended code. |
| The MongoDB BI Connector ODBC Driver may write outside the bounds of a fixed-size buffer when an application supplies an unusually long catalog, schema, or object name to a metadata retrieval function. This may result in memory corruption within the calling application's process, leading to abnormal termination and, under certain conditions, the potential for arbitrary code execution. |
| ServiceTalk HTTP/1.x incorrectly handles malformed Transfer-Encoding which could result in request smuggling attacks. This vulnerability is addressed in servicetalk version 0.42.65. |
| The MongoDB BI Connector ODBC Driver converts floating point column values into text without checking that the result fits within the destination buffer. When an application reads a sufficiently large floating point value as text, the driver may write beyond the end of that buffer and corrupt adjacent memory. A user who can store data in a collection read through the BI Connector could use this to crash the application performing the read. |
| An application using the MongoDB BI Connector ODBC Driver may experience a memory-safety issue when processing output parameters from a stored procedure. Triggering this issue requires connecting to an untrusted or impersonated database server that returns crafted metadata. This may result in process termination, disclosure of process memory, or, under certain conditions, arbitrary code execution. |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. Prior to 2.25.2, Loofah's HTML5 sanitizer applies its local-reference restriction only to the xlink:href attribute on SVG use and feImage elements, while browsers also accept the plain href attribute. A crafted sanitized SVG can therefore reference an arbitrary same-origin external document; use may render external SVG content containing scripts or other dangerous content, and feImage may load external images for tracking. Applications that sanitize user-supplied SVG with Loofah's default allowlist are affected. This issue is fixed in version 2.25.2. |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: URIs whose scheme is split or prefixed with the HTML5 named whitespace character references 	 or 
. CGI.unescapeHTML leaves those references intact, so allowed_uri? reports the URL safe even though a browser decodes and strips the tab or line feed and executes the resulting javascript: URL. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: or vbscript: URIs whose scheme is split by semicolon-less numeric character references such as :, 	, 
, or 
. CGI.unescapeHTML leaves these references encoded, so allowed_uri? reports the URL safe even though a browser decodes an encoded colon or strips encoded whitespace and executes the resulting URI scheme. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. |
| A data source definition containing an over-length file path setting may cause the MongoDB BI Connector ODBC Driver setup dialog to write outside the bounds of an allocated buffer. The issue stems from an incorrect buffer capacity calculation in the dialog's file and folder selection handling, and is reached only when a user opens the setup dialog for such a data source and initiates a file or folder selection. Depending on build configuration, the result may range from abnormal process termination to, under certain conditions, execution of unintended code in the context of the user running the dialog. |
| WolfStack before 25.9.2 contains a hard-coded cluster-authentication secret compiled into every build and published as a constant in src/auth/mod.rs, allowing remote unauthenticated attackers to bypass authentication by supplying this value in the X-WolfStack-Secret header to the require_auth() gate without any session, API key, or user account. Attackers can reach an affected node's management port to enumerate all Docker and LXC containers on the host and execute arbitrary commands as root inside any container via the POST /api/containers/{runtime}/{id}/exec endpoint. |
| kin-openapi is a Go project for handling OpenAPI files. Prior to 0.144.0, ValidationHandler.Load() in openapi3filter/validation_handler.go silently replaces a nil AuthenticationFunc with NoopAuthenticationFunc, which returns nil without checking credentials. This substitution causes every OpenAPI security requirement to be satisfied for unauthenticated requests when an application relies on ValidationHandler as its enforcement middleware. The no-op callback prevents the fail-closed ErrAuthenticationServiceMissing path from being reached and forwards the request to protected handlers that may require an API key, OAuth token, or another security scheme. This issue is fixed in version 0.144.0. |
| UpSnap is a wake on lan web app. Versions prior to 5.4.0 have an OS command injection vulnerability in the UpSnap’s device management functionality due to the presence of unsafe shell command template interpolation using the ip and the mac fields. User-controlled values can be inserted into the wake_cmd and shutdown_cmd templates and executed via /bin/sh -c (Linux) or cmd /C (Windows) without sanitization, resulting in an authenticated Remote Code Execution (RCE). A low-privileged user with permission to create or edit devices can execute arbitrary operating system commands on the UpSnap hosted server. Version 5.4.0 patches the issue. |
| PDF::WebKit versions through 1.2 for Perl allow argument injection into wkhtmltopdf via meta tags in the source document.
For an HTML string or file source, the constructor collects every <meta name="pdf-webkit-KEY" content="VALUE"> element in the document head through _pdf_webkit_meta_tags and turns each one into a wkhtmltopdf command line option. KEY is normalized to an option name matching --[a-z0-9-]+ but is not checked against an allow list, VALUE is passed through unchanged as the argument that follows it, and a VALUE of "yes" emits the option as a bare flag. BUILD merges the meta derived options last, so they also override the module defaults and the options passed to new. Switches such as --enable-local-file-access and --cookie-jar are reachable this way. The renderer is executed with an argument list rather than a shell command, so this is argument injection and not shell injection.
Any caller that renders untrusted HTML lets the document choose the renderer's options and override those set by the application, including options that read local files into the resulting PDF or write to a chosen path. A URL source is not scanned, and the scan is skipped when XML::LibXML, a recommended dependency, is not installed. |
| PDF::WebKit versions through 1.2 for Perl allow OS command injection via a 2-arg open() of the output path in to_pdf and of stylesheet paths in _style_tag_for.
to_pdf reads the generated PDF back from its path argument, and _style_tag_for reads each entry of the stylesheets list, by assigning the path to a local @ARGV and reading it with the diamond operator, which opens each @ARGV element with Perl's 2-arg open(). A value that begins or ends with a pipe ("| cmd", "cmd |") is run as a command rather than opened as a file, and one that begins with a redirect ("> path", ">> path") opens that path for write or append. to_file forwards its path argument to to_pdf and reaches the same read.
Any caller that forwards untrusted input as the output path or as a stylesheets entry can run a command under the process UID; with the "cmd |" form the command's output is returned in place of the PDF, and with the "> path" form the named file is truncated. Stylesheets may only be added to an HTML source, so a URL or file source exposes the output path alone. |
| UpSnap is a wake on lan web app. Versions 4.4.1 through 5.3.5 are vulnerable to a missing-authentication / privilege-escalation chain in `pb.HandlerInitSuperuser` (`backend/pb/handlers.go:249`), reachable as `POST /api/upsnap/init-superuser`. The vulnerable code lacks any authentication, setup token, IP allow-list, or rate limit and is gated only by a `totalSuperusers > 0` count check — a condition that is false on every fresh install — allowing an unauthenticated network-adjacent attacker to register the initial superuser account, receive a long-lived JWT, and pivot to root remote code execution at `backend/networking/wake.go:43` (`exec.CommandContext(ctx, "/bin/sh", "-c", wake_cmd)`). Version 5.4.0 fixes the issue. |
