| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/bpf-ops: reject re-registration of an already-bound ops
io_install_bpf() only rejects a second registration on the ctx side
(ctx->bpf_ops) and sets the per-map back-pointer ops->priv
unconditionally. The struct_ops link path never advances a map past
BPF_STRUCT_OPS_STATE_READY, so the same io_uring_bpf_ops map can be
registered more than once, and bpf_io_reg() re-resolves the target ring
via fget(ops->ring_fd) on every call. A caller can therefore point the
same ring_fd at a different io_ring_ctx between two BPF_LINK_CREATE
calls.
The second registration passes the ctx->bpf_ops check (the new ctx has
none) and overwrites ops->priv, orphaning the first ctx. Teardown
(io_eject_bpf()/bpf_io_unreg()) only reaches a ctx through ops->priv, so
the orphaned ctx is never torn down: its ctx->loop_step keeps pointing
into the struct_ops trampoline, which is freed once the map is gone. A
later io_uring_enter() on the orphaned ring then calls the dangling
ctx->loop_step from io_run_loop() -- a use-after-free of freed
executable memory, reachable by a task with CAP_BPF + CAP_PERFMON.
Reject registration when ops->priv is already set, as hid_bpf_reg()
does for its struct_ops. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reset register bounds before narrowing retval range in check_mem_access()
When the BPF verifier processes a context load of an LSM hook return
value, it calls __mark_reg_s32_range() to narrow the register to the
hook's valid range. However, __mark_reg_s32_range() intersects the new
range with the register's existing bounds using max_t()/min_t() rather
than replacing them.
If the destination register carries stale bounds from a prior instruction
(e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than
reality. The verifier then believes it knows the register's exact value,
while at runtime the actual hook return value is loaded, creating a
verifier/runtime mismatch that can be used to bypass BPF memory safety
checks.
The else branch already calls mark_reg_unknown() to reset register state
before any narrowing. Apply the same reset in the is_retval path so
stale bounds are cleared before __mark_reg_s32_range() intersects. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf,fork: wipe ->bpf_storage before bailouts that access it
Currently, copy_process() can bail out to free_task() before p->bpf_storage
has been initialized, with this call graph (shown here for the
!CONFIG_MEMCG case):
copy_process
dup_task_struct
arch_dup_task_struct
[copies the entire task_struct, including ->bpf_storage member]
[RLIMIT_NPROC check fails]
delayed_free_task
free_task
bpf_task_storage_free
rcu_dereference(task->bpf_storage)
bpf_local_storage_destroy
In this case, the nascent task's ->bpf_storage member that
bpf_local_storage_destroy() operates on is a plain copy of the parent's
->bpf_storage pointer, not a real initialized pointer.
This leads to badness (kernel hangs, UAF).
This is reachable as long as the process calling fork() has been inserted
into a task storage map. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: unregister blocking notifier on init failure
sparx5_register_notifier_blocks() registers the switchdev blocking
notifier before allocating the ordered workqueue. If the workqueue
allocation fails, the error path unregisters the switchdev and netdevice
notifiers, but leaves the blocking notifier registered.
Add a separate error label for the workqueue allocation failure path and
unregister the switchdev blocking notifier there. |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin metadata: fix metadata snapshot consistency on commit failure
__reserve_metadata_snap() and __release_metadata_snap() modify the
superblock's held_root directly in the block_manager's buffer. If the
subsequent metadata commit fails, the held_root gets flushed to disk
through the abort_transaction path, resulting in inconsistent metadata.
Reproducer 1: __reserve_metadata_snap()
1. Create a 2 MiB metadata device and make the region after the 14th
block inaccessible, to trigger metadata commit failure in the
subsequent reserve_metadata_snap operation. The 14th block will be
the shadow destination for the index block.
dmsetup create tmeta --table "0 112 linear /dev/sdc 0
112 3984 error"
2. Create a 16 MiB thin-pool
dmsetup create tdata --table "0 32768 zero"
dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1
dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \
/dev/mapper/tdata 128 0 1 skip_block_zeroing"
3. Take a metadata snapshot to trigger metadata commit failure and
transaction abort. However, the held_root is written to disk,
breaking metadata consistency.
dmsetup message tpool 0 "reserve_metadata_snap"
thin_check v1.2.2 result:
Bad reference count for metadata block 6. Expected 2, but space map contains 1.
Bad reference count for metadata block 7. Expected 2, but space map contains 1.
Bad reference count for metadata block 13. Expected 1, but space map contains 0.
Reproducer 2: __release_metadata_snap()
1. Create a 2 MiB metadata device and make the region after the 16th
block inaccessible, to trigger metadata commit failure in the
subsequent release_metadata_snap operation. The 16th block will be
the shadow destination for the index block.
dmsetup create tmeta --table "0 128 linear /dev/sdc 0
128 3968 error"
2. Create a 16 MiB thin-pool
dmsetup create tdata --table "0 32768 zero"
dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1
dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \
/dev/mapper/tdata 128 0 1 skip_block_zeroing"
3. Reserve then release the metadata snapshot, to trigger metadata
commit failure and transaction abort. The held_root gets removed
from the on-disk superblock, causing inconsistent metadata.
dmsetup message tpool 0 "reserve_metadata_snap"
dmsetup message tpool 0 "release_metadata_snap"
thin_check v1.2.2 result:
Bad reference count for metadata block 6. Expected 1, but space map contains 2.
Bad reference count for metadata block 7. Expected 1, but space map contains 2.
1 metadata blocks have leaked.
Fix by deferring the held_root update to commit time.
Additionally, move the existing-snapshot check in __reserve_metadata_snap
before the shadow operation to avoid unnecessary work. In
__release_metadata_snap, clear pmd->held_root before btree deletion so
partial failure leaks blocks rather than leaving a stale reference, and
unlock the snapshot block before decrementing its refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
dm era: fix out-of-bounds memory access for non-zero start sector
dm-era tracks writes in target-relative blocks, but era_map() calculates
the writeset block before applying the target offset. Tables with a
non-zero start sector can therefore pass an absolute mapped-device block
to metadata_current_marked().
If the absolute block is beyond the current writeset size,
writeset_marked() tests past the end of the in-core bitset. KASAN reports
this as a vmalloc-out-of-bounds access.
Apply the target offset before calculating the era block so writeset
lookups use the target-relative block number. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-log: fix a bitset_size overflow on 32bit machines
Commit c20e36b7631d ("dm log: fix out-of-bounds write due to
region_count overflow") made sure that region_count could fit in an
unsigned int. But the bitmap memory isn't allocated based on
region_count. It uses bitset_size (a size_t variable). The first step of
calculating bitset_size is to set it to region_count, rounded up to a
multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG
smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit
architecture, this will make bitset_size wrap around to 0 and fail,
despite region_count being valid.
Since bitset_size gets divided by 8, it can hold any valid region_count.
It just needs a special case to handle the rollover. If it is 0, the
value rolled over, and bitset size should be set to the number of bytes
needed to hold 2^32 bits. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: avoid leaking the caller's thread keyring via the table device file
The refactoring in commit a28d893eb327 ("md: port block device access to file")
accidentally causes the caller's thread keyring to be kept alive long
beyond the caller's lifetime.
As a result, "cryptsetup luksSuspend" silently fails to wipe the
LUKS volume key from memory.
In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread
keyring to pass the volume key to the kernel. dm-crypt's
crypt_set_keyring_key() copies the key material into its own
crypt_config structure and then drops its own reference to the key in
the keyring with key_put().
With this fix, restoring pre-v6.9 behavior, the copy in the thread
keyring is then promptly garbage collected, such that exactly one copy
of the volume key remains. This single copy is correctly wiped from
memory on "cryptsetup luksSuspend".
Without this fix, the thread keyring and the volume key in it remains.
This second copy is only freed on "luksClose". "luksSuspend" neither
knows about this copy nor has any way to remove it, so the key remains
recoverable from RAM after a suspend that is documented to have wiped it.
This fix should not introduce new security problems, as the code is
anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling
task, is the legitimate owner of this long-lived file. |
| In the Linux kernel, the following vulnerability has been resolved:
dm_early_create: fix freeing used table on dm_resume failure
If dm_resume fails, the kernel attempts to free table with
dm_table_destroy, but the table was already instantiated with
dm_swap_table. This commit skips the call to dm_table_destroy in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix a bug if the bio is out of limits
If dm_integrity_check_limits fails, the code would exit with
DM_MAPIO_KILL. However, the range would be already locked at this point,
and it wouldn't be unlocked, resulting in a deadlock. Let's move the
limit check up, so that when it exits, no resources are leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: don't increment hash_offset twice
hash_offset is already incremented in the loop "for (i = 0; i < to_copy;
i++, ts--)". Do not increment it again. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: fix buffer overflow in FEC calculation
There's a buffer overflow in dm-verity-fec:
if (neras && *neras <= v->fec->roots)
fio->erasures[(*neras)++] = i;
This allows *neras to reach roots + 1 (the post-increment pushes it past
roots). This value is then passed as no_eras to decode_rs8(). Inside the
RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator
polynomial loop writes lambda[j] where j can reach nroots + 1 — one
element past the end of lambda[] (which is sized nroots + 1, valid
indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting
the syndrome buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Make dma_fence_dedup_array() robust against 0-count input
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap()
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Use caller client for debug BO sync
amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's
drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls
amdxdna_hwctx_sync_debug_bo(), but passes abo->client.
amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle
namespace for debug_bo_hdl and as the owner of the hardware context xarray.
Those must match the file that supplied args->handle. The BO's stored
client pointer is object state, not the ioctl context.
Pass filp->driver_priv instead, matching the original handle lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Reject firmware log with size smaller than header
fw_log_from_bo() validates the tracing buffer header_size and that the
log fits within the BO, but never checks that log->size is at least
log->header_size. fw_log_print_buffer() then computes:
u32 data_size = log->size - log->header_size;
which underflows to a near-U32_MAX value when firmware reports a log whose
size is smaller than its header. That huge data_size defeats the
log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu:
Add bounds checks for firmware log indices"), so fw_log_print_lines() reads
far past the small real data region of the BO. A size of 0 also makes
fw_log_from_bo() advance the offset by 0, causing the callers to loop
forever on the same header.
Reject logs whose size is smaller than the header (which also rejects
size == 0). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend
whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0;
the se_cmd is initialised (kref_init() via target_init_cmd()) only
later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB
path. The two error paths in scsiback_do_cmd_fn() taken before the
command is submitted -- a failed scsiback_gnttab_data_map() and an
unknown ring_req.act -- call
transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a
refcount of 0. That underflows it ("refcount_t: underflow;
use-after-free") and, as the release function is not run, leaks the
command tag.
Impact: a pvSCSI guest can leak every command tag of a LUN's session,
stopping the LUN, by submitting requests with a bad grant reference or
an unknown request type; under panic_on_warn the refcount underflow
panics the host.
Add a helper that just returns the tag with target_free_tag() and sends
the error response. It frees the tag while the v2p reference still pins
the session, and snapshots the response fields beforehand because
freeing the tag can let another ring reuse the pending_req slot. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move()
hand the raw PERSISTENT RESERVE OUT parameter buffer to
target_parse_pr_out_transport_id() without telling it how many bytes are
valid. For an iSCSI TransportID (FORMAT CODE 01b),
iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with
an unbounded strstr() (and on the error path prints the name with a further
unbounded "%s"). An initiator can submit a TransportID whose iSCSI name
contains neither a ",i,0x" substring nor a NUL terminator, filling the
parameter list to its end, so the scan runs off the end of the buffer.
When the parameter list spans more than one page the buffer is a multi-page
vmap (transport_kmap_data_sg()), so the over-read walks into the trailing
vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It
is reachable by any fabric that delivers a PR OUT to a device exported
through an iSCSI TPG, including a guest via vhost-scsi.
Pass the number of received bytes down to the parser and validate the iSCSI
TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up
front: reject it if it is below the spc4r17 minimum or larger than the
received buffer, then bound the separator search, the ISID walk and the
name copy by that length. This is the length check the callers already
perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len
against tpdl, core_scsi3_emulate_register_and_move() validates it against
data_length), moved ahead of the scan. Also drop the unbounded "%s" of the
unterminated name.
Add per-format explicit name-length checks before copying into i_str,
rather than silently truncating with min_t: for FORMAT CODE 00b reject if
the descriptor body (tid_len - 4 bytes) cannot fit in
i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion
(from &buf[4] up to the separator) cannot fit. Both checks make the bounds
intent explicit at each format branch.
While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x"
separator sits at the very end of the descriptor: that leaves an empty ISID
and points the returned port nexus pointer at buf + tid_len, one past the
descriptor, which the registration code (__core_scsi3_locate_pr_reg(),
__core_scsi3_alloc_registration()) then dereferences as the ISID string --
the same over-read of the parameter buffer for a malformed descriptor. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_alloc_registration(). When the parameter list spans more than
one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses
vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual
address backing iport_ptr is torn down and every subsequent dereference is
a use-after-free read of the unmapped region.
Keep the parameter list mapped until iport_ptr is no longer needed: drop
the early transport_kunmap_data_sg() and unmap once on the success path,
right before returning. The error paths already unmap through the existing
"if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs
on every post-map error exit because buf is no longer cleared early. Only
reads of the mapping happen while spinlocks are held; the map and unmap
calls remain outside any lock. The sibling caller
core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it
and is left unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix use-after-free during unmount
During unmount or failure teardown all mon_data structures that contain
monitoring event file private data are freed after which kernfs nodes are
removed. However, the RDT_DELETED flag is never set for the statically
allocated default resource group.
A concurrent reader of an event file associated with the default resource
group may, after dropping kernfs active protection, block on rdtgroup_mutex
while unmount proceeds to free the file private data and destroy the kernfs
node without waiting for the reader.
When the mutex is released, the reader wakes up, observes that RDT_DELETED
is not set for the default group, and dereferences the already-freed
file private data.
The scenario can be depicted as follows:
CPU0 CPU1
/*
* Default resource group's
* monitoring data accessible via
* kernfs file with kernfs_node::priv
* pointing to a struct mon_data.
* User opens the file for reading.
*/
rdtgroup_mondata_show() /* arch encounters fatal error */
rdtgroup_kn_lock_live() resctrl_exit()
atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock()
kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex)
cpus_read_lock() resctrl_fs_teardown()
mutex_lock(&rdtgroup_mutex) rmdir_all_sub()
mon_put_kn_priv()
/* Delete all mon_data structures */
rdtgroup_destroy_root()
kernfs_destroy_root()
rdtgroup_default.kn = NULL
mutex_unlock(&rdtgroup_mutex)
/*
* rdtgroup_default.flags is empty so
* rdtgroup_kn_lock_live() returns
* &rdtgroup_default
*/
md = of->kn->priv;
/* md points to freed mon_data */
Set RDT_DELETED for the default group unconditionally since the flag does
not lead to the freeing of this statically allocated group.
Do not allow a new resctrl mount if there are any waiters on default group
of previous mount. A new mount will re-initialize the default group that
would appear to waiters from previous mount as though the default group is
accessible causing them to access the mon_data structures from the previous
mount that have been removed. |
