| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix taking invalid lock on wedge
If device wedges on e.g. GuC upload, the submission is not yet enabled
and the state is not even initialized. Protect the wedge call so it does
nothing in this case. It fixes the following splat:
[] xe 0000:bf:00.0: [drm] device wedged, needs recovery
[] ------------[ cut here ]------------
[] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60
...
[] RIP: 0010:__mutex_lock+0x8a1/0xe60
[] mutex_lock_nested+0x1b/0x30
[] xe_guc_submit_wedge+0x80/0x2b0 [xe] |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host and Application (VA and SaaS deployments) run many Docker containers on shared internal networks without firewalling or segmentation between instances. A compromise of any single container allows direct access to internal services (HTTP, Redis, MySQL, etc.) on the overlay network. From a compromised container, an attacker can reach and exploit other services, enabling lateral movement, data theft, and system-wide compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential deadlock in __driver_attach
In __driver_attach function, There are also AA deadlock problem,
like the commit b232b02bf3c2 ("driver core: fix deadlock in
__device_attach").
stack like commit b232b02bf3c2 ("driver core: fix deadlock in
__device_attach").
list below:
In __driver_attach function, The lock holding logic is as follows:
...
__driver_attach
if (driver_allows_async_probing(drv))
device_lock(dev) // get lock dev
async_schedule_dev(__driver_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__driver_attach_async_helper will get lock dev as
will, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As above show, when it is allowed to do async probes, because of
out of memory or work limit, async work is not be allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__driver_attach_async_helper getting lock dev.
Reproduce:
and it can be reproduce by make the condition
(if (!entry || atomic_read(&entry_count) > MAX_WORK)) untenable, like
below:
[ 370.785650] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[ 370.787154] task:swapper/0 state:D stack: 0 pid: 1 ppid:
0 flags:0x00004000
[ 370.788865] Call Trace:
[ 370.789374] <TASK>
[ 370.789841] __schedule+0x482/0x1050
[ 370.790613] schedule+0x92/0x1a0
[ 370.791290] schedule_preempt_disabled+0x2c/0x50
[ 370.792256] __mutex_lock.isra.0+0x757/0xec0
[ 370.793158] __mutex_lock_slowpath+0x1f/0x30
[ 370.794079] mutex_lock+0x50/0x60
[ 370.794795] __device_driver_lock+0x2f/0x70
[ 370.795677] ? driver_probe_device+0xd0/0xd0
[ 370.796576] __driver_attach_async_helper+0x1d/0xd0
[ 370.797318] ? driver_probe_device+0xd0/0xd0
[ 370.797957] async_schedule_node_domain+0xa5/0xc0
[ 370.798652] async_schedule_node+0x19/0x30
[ 370.799243] __driver_attach+0x246/0x290
[ 370.799828] ? driver_allows_async_probing+0xa0/0xa0
[ 370.800548] bus_for_each_dev+0x9d/0x130
[ 370.801132] driver_attach+0x22/0x30
[ 370.801666] bus_add_driver+0x290/0x340
[ 370.802246] driver_register+0x88/0x140
[ 370.802817] ? virtio_scsi_init+0x116/0x116
[ 370.803425] scsi_register_driver+0x1a/0x30
[ 370.804057] init_sd+0x184/0x226
[ 370.804533] do_one_initcall+0x71/0x3a0
[ 370.805107] kernel_init_freeable+0x39a/0x43a
[ 370.805759] ? rest_init+0x150/0x150
[ 370.806283] kernel_init+0x26/0x230
[ 370.806799] ret_from_fork+0x1f/0x30
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: When HCI work queue is drained, only queue chained work
The HCI command, event, and data packet processing workqueue is drained
to avoid deadlock in commit
76727c02c1e1 ("Bluetooth: Call drain_workqueue() before resetting state").
There is another delayed work, which will queue command to this drained
workqueue. Which results in the following error report:
Bluetooth: hci2: command 0x040f tx timeout
WARNING: CPU: 1 PID: 18374 at kernel/workqueue.c:1438 __queue_work+0xdad/0x1140
Workqueue: events hci_cmd_timeout
RIP: 0010:__queue_work+0xdad/0x1140
RSP: 0000:ffffc90002cffc60 EFLAGS: 00010093
RAX: 0000000000000000 RBX: ffff8880b9d3ec00 RCX: 0000000000000000
RDX: ffff888024ba0000 RSI: ffffffff814e048d RDI: ffff8880b9d3ec08
RBP: 0000000000000008 R08: 0000000000000000 R09: 00000000b9d39700
R10: ffffffff814f73c6 R11: 0000000000000000 R12: ffff88807cce4c60
R13: 0000000000000000 R14: ffff8880796d8800 R15: ffff8880796d8800
FS: 0000000000000000(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c0174b4000 CR3: 000000007cae9000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? queue_work_on+0xcb/0x110
? lockdep_hardirqs_off+0x90/0xd0
queue_work_on+0xee/0x110
process_one_work+0x996/0x1610
? pwq_dec_nr_in_flight+0x2a0/0x2a0
? rwlock_bug.part.0+0x90/0x90
? _raw_spin_lock_irq+0x41/0x50
worker_thread+0x665/0x1080
? process_one_work+0x1610/0x1610
kthread+0x2e9/0x3a0
? kthread_complete_and_exit+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
To fix this, we can add a new HCI_DRAIN_WQ flag, and don't queue the
timeout workqueue while command workqueue is draining. |
| An Insecure Direct Object Reference (IDOR) vulnerability was discovered in ARD. The flaw exists in the `fe_uid` parameter of the payment history API endpoint. An authenticated attacker can manipulate this parameter to access the payment history of other users without authorization. |
| Nagios XI versions prior to 2024R1.1.3 did not invalidate all other active sessions for a user when that user's password was changed. As a result, any pre-existing sessions (including those potentially controlled by an attacker) remained valid after a credential update. This insufficient session expiration could allow continued unauthorized access to user data and actions even after a password change. |
| Authorization Bypass Through User-Controlled Key vulnerability in kamleshyadav Miraculous Core Plugin miraculouscore allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Miraculous Core Plugin: from n/a through < 2.0.9. |
| The Microsoft vulnerable driver block list is implemented as Windows Defender Application Control (WDAC) policy. Entries that specify only the to-be-signed (TBS) part of the code signer certificate are properly blocked, but entries that specify the signing certificate's TBS hash along with a 'FileAttribRef' qualifier (such as file name or version) may not be blocked, whether hypervisor-protected code integrity (HVCI) is enabled or not. NOTE: The vendor disputes this CVE ID assignment and states that the driver blocklist is intended for use with HVCI. |
| SolarWinds Web Help Desk was reported to be affected by an XML External Entity Injection (XXE) vulnerability that could lead to information disclosure. A valid, low-privilege access is required unless the attacker had access to the local server to modify configuration files. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix locking order in ivpu_job_submit
Fix deadlock in job submission and abort handling.
When a thread aborts currently executing jobs due to a fault,
it first locks the global lock protecting submitted_jobs (#1).
After the last job is destroyed, it proceeds to release the related context
and locks file_priv (#2). Meanwhile, in the job submission thread,
the file_priv lock (#2) is taken first, and then the submitted_jobs
lock (#1) is obtained when a job is added to the submitted jobs list.
CPU0 CPU1
---- ----
(for example due to a fault) (jobs submissions keep coming)
lock(&vdev->submitted_jobs_lock) #1
ivpu_jobs_abort_all()
job_destroy()
lock(&file_priv->lock) #2
lock(&vdev->submitted_jobs_lock) #1
file_priv_release()
lock(&vdev->context_list_lock)
lock(&file_priv->lock) #2
This order of locking causes a deadlock. To resolve this issue,
change the order of locking in ivpu_job_submit(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix deadlock in ivpu_ms_cleanup()
Fix deadlock in ivpu_ms_cleanup() by preventing runtime resume after
file_priv->ms_lock is acquired.
During a failure in runtime resume, a cold boot is executed, which
calls ivpu_ms_cleanup_all(). This function calls ivpu_ms_cleanup()
that acquires file_priv->ms_lock and causes the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix PM related deadlocks in MS IOCTLs
Prevent runtime resume/suspend while MS IOCTLs are in progress.
Failed suspend will call ivpu_ms_cleanup() that would try to acquire
file_priv->ms_lock, which is already held by the IOCTLs. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omapfb: Add 'plane' value check
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: pciehp: Avoid unnecessary device replacement check
Hot-removal of nested PCI hotplug ports suffers from a long-standing race
condition which can lead to a deadlock: A parent hotplug port acquires
pci_lock_rescan_remove(), then waits for pciehp to unbind from a child
hotplug port. Meanwhile that child hotplug port tries to acquire
pci_lock_rescan_remove() as well in order to remove its own children.
The deadlock only occurs if the parent acquires pci_lock_rescan_remove()
first, not if the child happens to acquire it first.
Several workarounds to avoid the issue have been proposed and discarded
over the years, e.g.:
https://lore.kernel.org/r/4c882e25194ba8282b78fe963fec8faae7cf23eb.1529173804.git.lukas@wunner.de/
A proper fix is being worked on, but needs more time as it is nontrivial
and necessarily intrusive.
Recent commit 9d573d19547b ("PCI: pciehp: Detect device replacement during
system sleep") provokes more frequent occurrence of the deadlock when
removing more than one Thunderbolt device during system sleep. The commit
sought to detect device replacement, but also triggered on device removal.
Differentiating reliably between replacement and removal is impossible
because pci_get_dsn() returns 0 both if the device was removed, as well as
if it was replaced with one lacking a Device Serial Number.
Avoid the more frequent occurrence of the deadlock by checking whether the
hotplug port itself was hot-removed. If so, there's no sense in checking
whether its child device was replaced.
This works because the ->resume_noirq() callback is invoked in top-down
order for the entire hierarchy: A parent hotplug port detecting device
replacement (or removal) marks all children as removed using
pci_dev_set_disconnected() and a child hotplug port can then reliably
detect being removed. |
| Inappropriate implementation in Lens in Google Chrome on iOS prior to 136.0.7103.59 allowed a remote attacker to perform UI spoofing via a crafted QR code. (Chromium security severity: Low) |
| Authorization Bypass Through User-Controlled Key, Weak Password Recovery Mechanism for Forgotten Password, Authentication Bypass by Assumed-Immutable Data vulnerability in Optimus Software Brokerage Automation allows Exploiting Trust in Client, Authentication Bypass, Manipulate Registry Information.This issue affects Brokerage Automation: before 1.1.71. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: Fix obscure lockdep violation for udc_mutex
A recent commit expanding the scope of the udc_lock mutex in the
gadget core managed to cause an obscure and slightly bizarre lockdep
violation. In abbreviated form:
======================================================
WARNING: possible circular locking dependency detected
5.19.0-rc7+ #12510 Not tainted
------------------------------------------------------
udevadm/312 is trying to acquire lock:
ffff80000aae1058 (udc_lock){+.+.}-{3:3}, at: usb_udc_uevent+0x54/0xe0
but task is already holding lock:
ffff000002277548 (kn->active#4){++++}-{0:0}, at: kernfs_seq_start+0x34/0xe0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (kn->active#4){++++}-{0:0}:
lock_acquire+0x68/0x84
__kernfs_remove+0x268/0x380
kernfs_remove_by_name_ns+0x58/0xac
sysfs_remove_file_ns+0x18/0x24
device_del+0x15c/0x440
-> #2 (device_links_lock){+.+.}-{3:3}:
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
device_link_remove+0x3c/0xa0
_regulator_put.part.0+0x168/0x190
regulator_put+0x3c/0x54
devm_regulator_release+0x14/0x20
-> #1 (regulator_list_mutex){+.+.}-{3:3}:
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
regulator_lock_dependent+0x54/0x284
regulator_enable+0x34/0x80
phy_power_on+0x24/0x130
__dwc2_lowlevel_hw_enable+0x100/0x130
dwc2_lowlevel_hw_enable+0x18/0x40
dwc2_hsotg_udc_start+0x6c/0x2f0
gadget_bind_driver+0x124/0x1f4
-> #0 (udc_lock){+.+.}-{3:3}:
__lock_acquire+0x1298/0x20cc
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
usb_udc_uevent+0x54/0xe0
Evidently this was caused by the scope of udc_mutex being too large.
The mutex is only meant to protect udc->driver along with a few other
things. As far as I can tell, there's no reason for the mutex to be
held while the gadget core calls a gadget driver's ->bind or ->unbind
routine, or while a UDC is being started or stopped. (This accounts
for link #1 in the chain above, where the mutex is held while the
dwc2_hsotg_udc is started as part of driver probing.)
Gadget drivers' ->disconnect callbacks are problematic. Even though
usb_gadget_disconnect() will now acquire the udc_mutex, there's a
window in usb_gadget_bind_driver() between the times when the mutex is
released and the ->bind callback is invoked. If a disconnect occurred
during that window, we could call the driver's ->disconnect routine
before its ->bind routine. To prevent this from happening, it will be
necessary to prevent a UDC from connecting while it has no gadget
driver. This should be done already but it doesn't seem to be;
currently usb_gadget_connect() has no check for this. Such a check
will have to be added later.
Some degree of mutual exclusion is required in soft_connect_store(),
which can dereference udc->driver at arbitrary times since it is a
sysfs callback. The solution here is to acquire the gadget's device
lock rather than the udc_mutex. Since the driver core guarantees that
the device lock is always held during driver binding and unbinding,
this will make the accesses in soft_connect_store() mutually exclusive
with any changes to udc->driver.
Lastly, it turns out there is one place which should hold the
udc_mutex but currently does not: The function_show() routine needs
protection while it dereferences udc->driver. The missing lock and
unlock calls are added. |
| OAuth2-Proxy is an open-source tool that can act as either a standalone reverse proxy or a middleware component integrated into existing reverse proxy or load balancer setups. In versions prior to 7.13.0, all deployments of OAuth2 Proxy in front of applications that normalize underscores to dashes in HTTP headers (e.g., WSGI-based frameworks such as Django, Flask, FastAPI, and PHP applications). Authenticated users can inject underscore variants of X-Forwarded-* headers that bypass the proxy’s filtering logic, potentially escalating privileges in the upstream app. OAuth2 Proxy authentication/authorization itself is not compromised. The problem has been patched with v7.13.0. By default all specified headers will now be normalized, meaning that both capitalization and the use of underscores (_) versus dashes (-) will be ignored when matching headers to be stripped. For example, both `X-Forwarded-For` and `X_Forwarded-for` will now be treated as equivalent and stripped away. For those who have a rational that requires keeping a similar looking header and not stripping it, the maintainers introduced a new configuration field for Headers managed through the AlphaConfig called `InsecureSkipHeaderNormalization`. As a workaround, ensure filtering and processing logic in upstream services don't treat underscores and hyphens in Headers the same way. |
| Improper Restriction of Excessive Authentication Attempts, Client-Side Enforcement of Server-Side Security, Reliance on Untrusted Inputs in a Security Decision vulnerability in Turkguven Software Technologies Inc. Perfektive allows Brute Force, Authentication Bypass, Functionality Bypass.This issue affects Perfektive: before Version: 12574 Build: 2701. |
| An unauthenticated attacker can obtain a user's plant list by knowing the username. |
