| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD
addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD
via addrconf_dad_end(), which drops ifp->lock on return. The lock
is re-acquired after net_info_ratelimited(). A concurrent
ipv6_del_addr() can take the lock in that window, set ifp->state
to DEAD and run list_del_rcu(&ifp->if_list).
addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad:
and schedules a new dad_work. The work calls ipv6_del_addr()
again, hitting the already-poisoned list entry:
general protection fault: 0000 [#1] SMP NOPTI
CPU: 4 PID: 217 Comm: kworker/4:1
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:ipv6_del_addr+0xe9/0x280
RAX: dead000000000122
Call Trace:
addrconf_dad_stop+0x113/0x140
addrconf_dad_work+0x28c/0x430
process_one_work+0x1eb/0x3b0
worker_thread+0x4d/0x400
kthread+0x104/0x140
ret_from_fork+0x35/0x40
Fold the addrconf_dad_end() logic into addrconf_dad_failure() under
a single ifp->lock critical section. The STABLE_PRIVACY branch
temporarily drops ifp->lock around address regeneration, so at
lock_errdad: verify the state is still POSTDAD before transitioning
to ERRDAD; bail out otherwise to avoid overwriting a state set by
another path while the lock was released. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier
mlx5_ib_alloc_transport_domain() allocates a transport domain and then
may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked.
Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an
error. Also return 0 explicitly in the no-loopback-capability success
branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure
mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with
mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path
through mlx5r_umr_unmap_free_xlt().
After mlx5_odp_populate_xlt() became fallible, its error path returned
directly and skipped that cleanup. This leaks the XLT DMA mapping and
buffer. If the emergency XLT page was used, it also leaves
xlt_emergency_page_mutex locked.
Break out of the loop so execution falls through the existing cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as well.
Enforce that by adding devx_key_in_sub_list() and calling
subscribe_event_xa_dealloc() only when the last matching pending entry is
being cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/syncobj: Fix memory leak in drm_syncobj_find_fence()
Commit 18226ba52159 ("drm/syncobj: reject invalid flags in
drm_syncobj_find_fence") forgot to take into account the fact that
drm_syncobj_find() takes a reference to syncobj and returns early
without dropping the reference, leading to memory leaks.
Reported by: Sam Spencer <sam.spencer@arm.com> |
| In the Linux kernel, the following vulnerability has been resolved:
dm: limit target bio polling to one shot
dm_poll_bio() is the ->poll_bio() callback for a stacked dm device.
The caller only knows about the dm queue, so it may decide to do a
spinning poll if it thinks a single queue is being polled. Passing those
flags unchanged to the mapped clone lets blk_mq_poll() spin on a target
queue from inside dm_poll_bio().
With io_uring IOPOLL on a dm-stripe target this can keep a task in
dm_poll_bio() -> bio_poll() -> blk_mq_poll()
long enough to trigger an RCU CPU stall, before io_uring gets back to
io_iopoll_check() and its need_resched() check.
Keep dm's ->poll_bio() bounded by forcing one-shot polling for target
bios. The caller can invoke dm_poll_bio() again if it wants to keep
polling, and it also gets a chance to reap completions or reschedule
between passes. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix log flood after cmd_mbox failure
hns_roce_cmd_mbox() is the command interface between driver and
hardware. When hardware is abnormal, the unlimited error printings
after hns_roce_cmd_mbox() failure will cause log flood and even
system crash.
Replace ibdev_err() and ibdev_warn() with their ratelimited versions
in the error handling path after hns_roce_cmd_mbox() (and its wrappers
hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
The OSS sequencer processes the input MIDI bytes into a sequencer
event to be dispatched later (in snd_seq_oss_midi_putc() called from
snd_seq_oss_process_event()). When it's a SysEx data, the event
record contains data.ext.ptr pointer to the original SysEx bytes, and
the referred data is copied into the pool afterwards at dispatching.
The problem is that, if the sequencer port gets closed concurrently
before the dispatch, the OSS sequencer core also releases the
resources (in snd_seq_oss_midi_check_exit_port()), while the pending
event may hold a stale pointer, eventually leading to a UAF at a later
dispatch.
Fortunately, there is already a refcounting mechanism (snd_use_lock_t)
for the OSS MIDI device access, and for addressing the issue above, we
just need to extend the refcount until the event gets dispatched.
This patch extends snd_seq_oss_process_event() to give back the
refcount object, which is in turn released after calling the sequencer
dispatcher with the given event in the caller side.
According to the original report, KASAN report as below:
KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470
RIP: 0033:0x7f2cb66a6340
Read of size 6
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_seq_event_dup+0x40c/0x470 (?:?)
kasan_check_range+0x10c/0x1c0 (?:?)
__asan_memcpy+0x27/0x70 (?:?)
snd_seq_event_dup+0x9/0x470 (?:?)
snd_seq_client_enqueue_event+0x139/0x240 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
snd_seq_kernel_client_enqueue+0x102/0x120 (?:?)
snd_seq_oss_write+0x416/0x4e0 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
odev_write+0x3b/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
__mutex_unlock_slowpath+0x129/0x510 (?:?)
ksys_write+0xe1/0x180 (?:?)
mutex_unlock+0x16/0x20 (?:?)
odev_ioctl+0x65/0xc0 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: midi: Serialize output teardown with event_input
event_process_midi() borrows msynth->output_rfile.output and then
passes the substream to dump_midi() and snd_rawmidi_kernel_write()
without synchronizing with the output open/close transition.
midisynth_use() also publishes output_rfile before
snd_rawmidi_output_params() has finished.
The last midisynth_unuse() can therefore release the same rawmidi file
and free substream->runtime before snd_rawmidi_kernel_write1() takes
its runtime buffer reference. That leaves the event_input path using a
stale substream or runtime and can end in a NULL-deref or use-after-free.
Fix this with two pieces of synchronization. Keep a short IRQ-safe
spinlock only for publishing or clearing output_rfile and for pairing
the output snapshot with an snd_use_lock_t reference. Once
event_process_midi() has taken that in-flight reference, it drops the
spinlock before calling snd_seq_dump_var_event(), dump_midi(), or
snd_rawmidi_kernel_write(). midisynth_unuse() now detaches the visible
rawmidi file under the same spinlock, waits for the in-flight writers
to drain, and only then drains and releases the saved file.
midisynth_use() likewise opens into a local snd_rawmidi_file and
publishes it only after snd_rawmidi_output_params() succeeds.
The buggy scenario involves two paths, with each column showing the
order within that path:
event_input path: last unuse path:
1. event_process_midi() snapshots 1. midisynth_unuse() starts
output_rfile.output. tearing down output_rfile.
2. dump_midi() reaches 2. snd_rawmidi_kernel_release()
snd_rawmidi_kernel_write() closes the output file.
before runtime is pinned. 3. close_substream() frees
3. The callback keeps using substream->runtime.
the borrowed substream.
Validation reproduced this kernel report:
KASAN null-ptr-deref in snd_rawmidi_kernel_write1+0x56/0x360
RIP: 0033:0x7fde7dd0837f
RIP: 0010:snd_rawmidi_kernel_write1+0x56/0x360 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix page fragment cache leak in error path
In nvmet_tcp_alloc_queue(), when a connection is closed during the
allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN),
the error handling jumps to out_destroy_sq and then to out_ida_remove
without draining the page fragment cache.
Although nvmet_tcp_free_cmd() is called in some error paths to release
individual page fragments, the underlying page cache reference held by
queue->pf_cache is never released. The first allocation using pf_cache
is the call to nvmet_tcp_alloc_cmd() for queue->connect, which happens
after ida_alloc() returns successfully. This results in a page leak each
time a connection fails during allocation, which could lead to memory
exhaustion over time if connections are repeatedly opened and closed.
Fix this by calling page_frag_cache_drain() before freeing the queue
structure in the out_ida_remove label. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix iommu_map_sgtable() return value check
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe
get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue
buffer, which is mapped into userspace. It validates num_sge against
max_sge, but then re-reads the same field to calculate the memcpy
size. A concurrent userspace thread can modify num_sge between
validation and use, causing a heap buffer overflow when copying the
WQE into qp->resp.srq_wqe.
Read num_sge into a local variable and use it for both the bounds
check and the size calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path
For non-SRQ QPs, the responder reads WQE fields directly from the
shared queue buffer mapped into userspace. This allows a malicious
user to modify fields like num_sge or sge entries while the kernel
is processing the WQE, leading to out-of-bounds reads in
rxe_resp_check_length() and copy_data().
Introduce get_recv_wqe() that validates num_sge and copies the WQE
to a kernel-local buffer before processing, matching the approach
already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is
reused since SRQ and non-SRQ paths are mutually exclusive per QP. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
raid1: fix nr_pending leak in REQ_ATOMIC bad-block error path
In raid1_write_request(), each per-mirror loop iteration begins by
incrementing rdev->nr_pending. If a REQ_ATOMIC write encounters a
badblock within the requested range, the code jumps to err_handle
without dropping the reference taken for the current mirror.
err_handle's cleanup loop will only decrements for k < i and
r1_bio->bios[k] is non-NULL. The current slot is therefore skipped,
leaving its nr_pending reference leaked permanently. The reference
prevents the rdev from ever being removed, since raid1_remove_conf()
refuses to remove an rdev with nr_pending > 0.
Fix this by calling rdev_dec_pending() before jumping to err_handle. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: fix TOCTOU race in luo_session_retrieve()
Extend the scope of the rwsem_read lock in luo_session_retrieve() to
overlap with the acquisition of the session mutex. This prevents a
concurrent thread from releasing and freeing the session between the
lookup and the mutex lock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix inconsistent arvif state in vdev_create error paths
ath12k_mac_vdev_create() has three error path issues that leave arvif
in an inconsistent state:
1. When ath12k_wmi_vdev_create() fails, the function returns directly
without clearing arvif->ar, which was already set before the WMI
call. Subsequent code checking arvif->ar to determine vdev readiness
will see a non-NULL value despite no vdev existing in firmware.
2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the
code jumped to err: skipping the DP peer cleanup and vdev rollback,
leaving num_created_vdevs, vdev maps and arvif list membership live.
3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to
err_vdev_del: skipping the DP peer cleanup.
Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead
of returning directly, routing both err_peer_del failure paths through
err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating
the arvif state cleanup at err:.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL deref in change_sta_links for unready link
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.
Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
Call trace:
ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
drv_sta_state+0x100/0xbd8 [mac80211]
__sta_info_destroy_part2+0x148/0x178 [mac80211]
ieee80211_set_disassoc+0x500/0x678 [mac80211]
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
Call trace:
ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
drv_set_key+0x70/0x100 [mac80211]
ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
ieee80211_add_key+0x16c/0x2ac [mac80211]
nl80211_new_key+0x138/0x280 [cfg80211]
Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
