| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: protect concurrent access to mem_cgroup_idr
Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.
We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.
Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one. |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.
[ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
[ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
[ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
[ 10.017908] Workqueue: events_unbound padata_mt_helper
[ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
:
[ 10.017963] Call Trace:
[ 10.017968] <TASK>
[ 10.018004] ? padata_mt_helper+0x39/0xb0
[ 10.018084] process_one_work+0x174/0x330
[ 10.018093] worker_thread+0x266/0x3a0
[ 10.018111] kthread+0xcf/0x100
[ 10.018124] ret_from_fork+0x31/0x50
[ 10.018138] ret_from_fork_asm+0x1a/0x30
[ 10.018147] </TASK>
Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0. The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.
Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Add error handling to pair_device()
hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.
Fixed by adding error handling in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: Fix ToCToU between perm check and set-uid/gid usage
When opening a file for exec via do_filp_open(), permission checking is
done against the file's metadata at that moment, and on success, a file
pointer is passed back. Much later in the execve() code path, the file
metadata (specifically mode, uid, and gid) is used to determine if/how
to set the uid and gid. However, those values may have changed since the
permissions check, meaning the execution may gain unintended privileges.
For example, if a file could change permissions from executable and not
set-id:
---------x 1 root root 16048 Aug 7 13:16 target
to set-id and non-executable:
---S------ 1 root root 16048 Aug 7 13:16 target
it is possible to gain root privileges when execution should have been
disallowed.
While this race condition is rare in real-world scenarios, it has been
observed (and proven exploitable) when package managers are updating
the setuid bits of installed programs. Such files start with being
world-executable but then are adjusted to be group-exec with a set-uid
bit. For example, "chmod o-x,u+s target" makes "target" executable only
by uid "root" and gid "cdrom", while also becoming setuid-root:
-rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target
becomes:
-rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target
But racing the chmod means users without group "cdrom" membership can
get the permission to execute "target" just before the chmod, and when
the chmod finishes, the exec reaches brpm_fill_uid(), and performs the
setuid to root, violating the expressed authorization of "only cdrom
group members can setuid to root".
Re-check that we still have execute permissions in case the metadata
has changed. It would be better to keep a copy from the perm-check time,
but until we can do that refactoring, the least-bad option is to do a
full inode_permission() call (under inode lock). It is understood that
this is safe against dead-locks, but hardly optimal. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_erp: Fix object nesting warning
ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM
(A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can
contain more ACLs (i.e., tc filters), but the number of masks in each
region (i.e., tc chain) is limited.
In order to mitigate the effects of the above limitation, the device
allows filters to share a single mask if their masks only differ in up
to 8 consecutive bits. For example, dst_ip/25 can be represented using
dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the
number of masks being used (and therefore does not support mask
aggregation), but can contain a limited number of filters.
The driver uses the "objagg" library to perform the mask aggregation by
passing it objects that consist of the filter's mask and whether the
filter is to be inserted into the A-TCAM or the C-TCAM since filters in
different TCAMs cannot share a mask.
The set of created objects is dependent on the insertion order of the
filters and is not necessarily optimal. Therefore, the driver will
periodically ask the library to compute a more optimal set ("hints") by
looking at all the existing objects.
When the library asks the driver whether two objects can be aggregated
the driver only compares the provided masks and ignores the A-TCAM /
C-TCAM indication. This is the right thing to do since the goal is to
move as many filters as possible to the A-TCAM. The driver also forbids
two identical masks from being aggregated since this can only happen if
one was intentionally put in the C-TCAM to avoid a conflict in the
A-TCAM.
The above can result in the following set of hints:
H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta
H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta
After getting the hints from the library the driver will start migrating
filters from one region to another while consulting the computed hints
and instructing the device to perform a lookup in both regions during
the transition.
Assuming a filter with mask X is being migrated into the A-TCAM in the
new region, the hints lookup will return H1. Since H2 is the parent of
H1, the library will try to find the object associated with it and
create it if necessary in which case another hints lookup (recursive)
will be performed. This hints lookup for {mask Y, A-TCAM} will either
return H2 or H3 since the driver passes the library an object comparison
function that ignores the A-TCAM / C-TCAM indication.
This can eventually lead to nested objects which are not supported by
the library [1].
Fix by removing the object comparison function from both the driver and
the library as the driver was the only user. That way the lookup will
only return exact matches.
I do not have a reliable reproducer that can reproduce the issue in a
timely manner, but before the fix the issue would reproduce in several
minutes and with the fix it does not reproduce in over an hour.
Note that the current usefulness of the hints is limited because they
include the C-TCAM indication and represent aggregation that cannot
actually happen. This will be addressed in net-next.
[1]
WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0
Modules linked in:
CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42
Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0
[...]
Call Trace:
<TASK>
__objagg_obj_get+0x2bb/0x580
objagg_obj_get+0xe/0x80
mlxsw_sp_acl_erp_mask_get+0xb5/0xf0
mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he()
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in
cfg80211_calculate_bitrate_he(), leading to below warning:
kernel: invalid HE MCS: bw:6, ru:6
kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211]
Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vsock: always initialize seqpacket_allow
There are two issues around seqpacket_allow:
1. seqpacket_allow is not initialized when socket is
created. Thus if features are never set, it will be
read uninitialized.
2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared,
then seqpacket_allow will not be cleared appropriately
(existing apps I know about don't usually do this but
it's legal and there's no way to be sure no one relies
on this).
To fix:
- initialize seqpacket_allow after allocation
- set it unconditionally in set_features |
| In the Linux kernel, the following vulnerability has been resolved:
devres: Fix memory leakage caused by driver API devm_free_percpu()
It will cause memory leakage when use driver API devm_free_percpu()
to free memory allocated by devm_alloc_percpu(), fixed by using
devres_release() instead of devres_destroy() within devm_free_percpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix event leak upon exit
When a task is scheduled out, pending sigtrap deliveries are deferred
to the target task upon resume to userspace via task_work.
However failures while adding an event's callback to the task_work
engine are ignored. And since the last call for events exit happen
after task work is eventually closed, there is a small window during
which pending sigtrap can be queued though ignored, leaking the event
refcount addition such as in the following scenario:
TASK A
-----
do_exit()
exit_task_work(tsk);
<IRQ>
perf_event_overflow()
event->pending_sigtrap = pending_id;
irq_work_queue(&event->pending_irq);
</IRQ>
=========> PREEMPTION: TASK A -> TASK B
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
// FAILS: task work has exited
task_work_add(&event->pending_task)
[...]
<IRQ WORK>
perf_pending_irq()
// early return: event->oncpu = -1
</IRQ WORK>
[...]
=========> TASK B -> TASK A
perf_event_exit_task(tsk)
perf_event_exit_event()
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// leak event due to unexpected refcount == 2
As a result the event is never released while the task exits.
Fix this with appropriate task_work_add()'s error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix event leak upon exec and file release
The perf pending task work is never waited upon the matching event
release. In the case of a child event, released via free_event()
directly, this can potentially result in a leaked event, such as in the
following scenario that doesn't even require a weak IRQ work
implementation to trigger:
schedule()
prepare_task_switch()
=======> <NMI>
perf_event_overflow()
event->pending_sigtrap = ...
irq_work_queue(&event->pending_irq)
<======= </NMI>
perf_event_task_sched_out()
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
task_work_add(&event->pending_task)
finish_lock_switch()
=======> <IRQ>
perf_pending_irq()
//do nothing, rely on pending task work
<======= </IRQ>
begin_new_exec()
perf_event_exit_task()
perf_event_exit_event()
// If is child event
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// event is leaked
Similar scenarios can also happen with perf_event_remove_on_exec() or
simply against concurrent perf_event_release().
Fix this with synchonizing against the possibly remaining pending task
work while freeing the event, just like is done with remaining pending
IRQ work. This means that the pending task callback neither need nor
should hold a reference to the event, preventing it from ever beeing
freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Always drain health in shutdown callback
There is no point in recovery during device shutdown. if health
work started need to wait for it to avoid races and NULL pointer
access.
Hence, drain health WQ on shutdown callback. |
| In the Linux kernel, the following vulnerability has been resolved:
dma: fix call order in dmam_free_coherent
dmam_free_coherent() frees a DMA allocation, which makes the
freed vaddr available for reuse, then calls devres_destroy()
to remove and free the data structure used to track the DMA
allocation. Between the two calls, it is possible for a
concurrent task to make an allocation with the same vaddr
and add it to the devres list.
If this happens, there will be two entries in the devres list
with the same vaddr and devres_destroy() can free the wrong
entry, triggering the WARN_ON() in dmam_match.
Fix by destroying the devres entry before freeing the DMA
allocation.
kokonut //net/encryption
http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03 |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix deadlock between mddev_suspend and flush bio
Deadlock occurs when mddev is being suspended while some flush bio is in
progress. It is a complex issue.
T1. the first flush is at the ending stage, it clears 'mddev->flush_bio'
and tries to submit data, but is blocked because mddev is suspended
by T4.
T2. the second flush sets 'mddev->flush_bio', and attempts to queue
md_submit_flush_data(), which is already running (T1) and won't
execute again if on the same CPU as T1.
T3. the third flush inc active_io and tries to flush, but is blocked because
'mddev->flush_bio' is not NULL (set by T2).
T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc
by T3.
T1 T2 T3 T4
(flush 1) (flush 2) (third 3) (suspend)
md_submit_flush_data
mddev->flush_bio = NULL;
.
. md_flush_request
. mddev->flush_bio = bio
. queue submit_flushes
. .
. . md_handle_request
. . active_io + 1
. . md_flush_request
. . wait !mddev->flush_bio
. .
. . mddev_suspend
. . wait !active_io
. .
. submit_flushes
. queue_work md_submit_flush_data
. //md_submit_flush_data is already running (T1)
.
md_handle_request
wait resume
The root issue is non-atomic inc/dec of active_io during flush process.
active_io is dec before md_submit_flush_data is queued, and inc soon
after md_submit_flush_data() run.
md_flush_request
active_io + 1
submit_flushes
active_io - 1
md_submit_flush_data
md_handle_request
active_io + 1
make_request
active_io - 1
If active_io is dec after md_handle_request() instead of within
submit_flushes(), make_request() can be called directly intead of
md_handle_request() in md_submit_flush_data(), and active_io will
only inc and dec once in the whole flush process. Deadlock will be
fixed.
Additionally, the only difference between fixing the issue and before is
that there is no return error handling of make_request(). But after
previous patch cleaned md_write_start(), make_requst() only return error
in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456,
md/raid456: fix a deadlock for dm-raid456 while io concurrent with
reshape)". Since dm always splits data and flush operation into two
separate io, io size of flush submitted by dm always is 0, make_request()
will not be called in md_submit_flush_data(). To prevent future
modifications from introducing issues, add WARN_ON to ensure
make_request() no error is returned in this context. |
| In the Linux kernel, the following vulnerability has been resolved:
block: initialize integrity buffer to zero before writing it to media
Metadata added by bio_integrity_prep is using plain kmalloc, which leads
to random kernel memory being written media. For PI metadata this is
limited to the app tag that isn't used by kernel generated metadata,
but for non-PI metadata the entire buffer leaks kernel memory.
Fix this by adding the __GFP_ZERO flag to allocations for writes. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Prevent UAF in proc_cpuset_show()
An UAF can happen when /proc/cpuset is read as reported in [1].
This can be reproduced by the following methods:
1.add an mdelay(1000) before acquiring the cgroup_lock In the
cgroup_path_ns function.
2.$cat /proc/<pid>/cpuset repeatly.
3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/
$umount /sys/fs/cgroup/cpuset/ repeatly.
The race that cause this bug can be shown as below:
(umount) | (cat /proc/<pid>/cpuset)
css_release | proc_cpuset_show
css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id);
css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...);
cgroup_destroy_root | mutex_lock(&cgroup_mutex);
rebind_subsystems |
cgroup_free_root |
| // cgrp was freed, UAF
| cgroup_path_ns_locked(cgrp,..);
When the cpuset is initialized, the root node top_cpuset.css.cgrp
will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will
allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated
&cgroup_root.cgrp. When the umount operation is executed,
top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp.
The problem is that when rebinding to cgrp_dfl_root, there are cases
where the cgroup_root allocated by setting up the root for cgroup v1
is cached. This could lead to a Use-After-Free (UAF) if it is
subsequently freed. The descendant cgroups of cgroup v1 can only be
freed after the css is released. However, the css of the root will never
be released, yet the cgroup_root should be freed when it is unmounted.
This means that obtaining a reference to the css of the root does
not guarantee that css.cgrp->root will not be freed.
Fix this problem by using rcu_read_lock in proc_cpuset_show().
As cgroup_root is kfree_rcu after commit d23b5c577715
("cgroup: Make operations on the cgroup root_list RCU safe"),
css->cgroup won't be freed during the critical section.
To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to
replace task_get_css with task_css.
[1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd |
| In the Linux kernel, the following vulnerability has been resolved:
lib: objagg: Fix general protection fault
The library supports aggregation of objects into other objects only if
the parent object does not have a parent itself. That is, nesting is not
supported.
Aggregation happens in two cases: Without and with hints, where hints
are a pre-computed recommendation on how to aggregate the provided
objects.
Nesting is not possible in the first case due to a check that prevents
it, but in the second case there is no check because the assumption is
that nesting cannot happen when creating objects based on hints. The
violation of this assumption leads to various warnings and eventually to
a general protection fault [1].
Before fixing the root cause, error out when nesting happens and warn.
[1]
general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80
[...]
Call Trace:
<TASK>
mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
worker_thread+0x2cb/0x3e0
kthread+0xd0/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter()
In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size.
But then 'rate->he_gi' is used as array index instead of 'status->he_gi'.
This can lead to go beyond array boundaries in case of 'rate->he_gi' is
not equal to 'status->he_gi' and is bigger than array size. Looks like
"copy-paste" mistake.
Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: fix invalid wait context of page_pool_destroy()
If the driver uses a page pool, it creates a page pool with
page_pool_create().
The reference count of page pool is 1 as default.
A page pool will be destroyed only when a reference count reaches 0.
page_pool_destroy() is used to destroy page pool, it decreases a
reference count.
When a page pool is destroyed, ->disconnect() is called, which is
mem_allocator_disconnect().
This function internally acquires mutex_lock().
If the driver uses XDP, it registers a memory model with
xdp_rxq_info_reg_mem_model().
The xdp_rxq_info_reg_mem_model() internally increases a page pool
reference count if a memory model is a page pool.
Now the reference count is 2.
To destroy a page pool, the driver should call both page_pool_destroy()
and xdp_unreg_mem_model().
The xdp_unreg_mem_model() internally calls page_pool_destroy().
Only page_pool_destroy() decreases a reference count.
If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we
will face an invalid wait context warning.
Because xdp_unreg_mem_model() calls page_pool_destroy() with
rcu_read_lock().
The page_pool_destroy() internally acquires mutex_lock().
Splat looks like:
=============================
[ BUG: Invalid wait context ]
6.10.0-rc6+ #4 Tainted: G W
-----------------------------
ethtool/1806 is trying to lock:
ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150
other info that might help us debug this:
context-{5:5}
3 locks held by ethtool/1806:
stack backtrace:
CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
__lock_acquire+0x1681/0x4de0
? _printk+0x64/0xe0
? __pfx_mark_lock.part.0+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x1b3/0x580
? mem_allocator_disconnect+0x73/0x150
? __wake_up_klogd.part.0+0x16/0xc0
? __pfx_lock_acquire+0x10/0x10
? dump_stack_lvl+0x91/0xc0
__mutex_lock+0x15c/0x1690
? mem_allocator_disconnect+0x73/0x150
? __pfx_prb_read_valid+0x10/0x10
? mem_allocator_disconnect+0x73/0x150
? __pfx_llist_add_batch+0x10/0x10
? console_unlock+0x193/0x1b0
? lockdep_hardirqs_on+0xbe/0x140
? __pfx___mutex_lock+0x10/0x10
? tick_nohz_tick_stopped+0x16/0x90
? __irq_work_queue_local+0x1e5/0x330
? irq_work_queue+0x39/0x50
? __wake_up_klogd.part.0+0x79/0xc0
? mem_allocator_disconnect+0x73/0x150
mem_allocator_disconnect+0x73/0x150
? __pfx_mem_allocator_disconnect+0x10/0x10
? mark_held_locks+0xa5/0xf0
? rcu_is_watching+0x11/0xb0
page_pool_release+0x36e/0x6d0
page_pool_destroy+0xd7/0x440
xdp_unreg_mem_model+0x1a7/0x2a0
? __pfx_xdp_unreg_mem_model+0x10/0x10
? kfree+0x125/0x370
? bnxt_free_ring.isra.0+0x2eb/0x500
? bnxt_free_mem+0x5ac/0x2500
xdp_rxq_info_unreg+0x4a/0xd0
bnxt_free_mem+0x1356/0x2500
bnxt_close_nic+0xf0/0x3b0
? __pfx_bnxt_close_nic+0x10/0x10
? ethnl_parse_bit+0x2c6/0x6d0
? __pfx___nla_validate_parse+0x10/0x10
? __pfx_ethnl_parse_bit+0x10/0x10
bnxt_set_features+0x2a8/0x3e0
__netdev_update_features+0x4dc/0x1370
? ethnl_parse_bitset+0x4ff/0x750
? __pfx_ethnl_parse_bitset+0x10/0x10
? __pfx___netdev_update_features+0x10/0x10
? mark_held_locks+0xa5/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x70
? __pm_runtime_resume+0x7d/0x110
ethnl_set_features+0x32d/0xa20
To fix this problem, it uses rhashtable_lookup_fast() instead of
rhashtable_lookup() with rcu_read_lock().
Using xa without rcu_read_lock() here is safe.
xa is freed by __xdp_mem_allocator_rcu_free() and this is called by
call_rcu() of mem_xa_remove().
The mem_xa_remove() is called by page_pool_destroy() if a reference
count reaches 0.
The xa is already protected by the reference count mechanism well in the
control plane.
So removing rcu_read_lock() for page_pool_destroy() is safe. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: trigger: Unregister sysfs attributes before calling deactivate()
Triggers which have trigger specific sysfs attributes typically store
related data in trigger-data allocated by the activate() callback and
freed by the deactivate() callback.
Calling device_remove_groups() after calling deactivate() leaves a window
where the sysfs attributes show/store functions could be called after
deactivation and then operate on the just freed trigger-data.
Move the device_remove_groups() call to before deactivate() to close
this race window.
This also makes the deactivation path properly do things in reverse order
of the activation path which calls the activate() callback before calling
device_add_groups(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix infinite loop when replaying fast_commit
When doing fast_commit replay an infinite loop may occur due to an
uninitialized extent_status struct. ext4_ext_determine_insert_hole() does
not detect the replay and calls ext4_es_find_extent_range(), which will
return immediately without initializing the 'es' variable.
Because 'es' contains garbage, an integer overflow may happen causing an
infinite loop in this function, easily reproducible using fstest generic/039.
This commit fixes this issue by unconditionally initializing the structure
in function ext4_es_find_extent_range().
Thanks to Zhang Yi, for figuring out the real problem! |
