| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Capability Access Management Service (camsvc) allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Graphics Kernel allows an authorized attacker to elevate privileges locally. |
| nixseparatedebuginfod before v0.4.1 is vulnerable to Directory Traversal. |
| Improper input validation in Windows LDAP - Lightweight Directory Access Protocol allows an authorized attacker to perform tampering over a network. |
| Windows Secure Boot stores Microsoft certificates in the UEFI KEK and DB. These original certificates are approaching expiration, and devices containing affected certificate versions must update them to maintain Secure Boot functionality and avoid compromising security by losing security fixes related to Windows boot manager or Secure Boot.
The operating system’s certificate update protection mechanism relies on firmware components that might contain defects, which can cause certificate trust updates to fail or behave unpredictably. This leads to potential disruption of the Secure Boot trust chain and requires careful validation and deployment to restore intended security guarantees.
Certificate Authority (CA)
Location
Purpose
Expiration Date
Microsoft Corporation KEK CA 2011
KEK
Signs updates to the DB and DBX
06/24/2026
Microsoft Corporation UEFI CA 2011
DB
Signs 3rd party boot loaders, Option ROMs, etc.
06/27/2026
Microsoft Windows Production PCA 2011
DB
Signs the Windows Boot Manager
10/19/2026
For more information see this CVE and Windows Secure Boot certificate expiration and CA updates. |
| A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Explorer-TachyonCore-LogoffUser instruction prior V21.1. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform. |
| libcoap versions up to and including 4.3.5, prior to commit 30db3ea, contain a stack-based buffer overflow in address resolution when attacker-controlled hostname data is copied into a fixed 256-byte stack buffer without proper bounds checking. A remote attacker can trigger a crash and potentially achieve remote code execution depending on compiler options and runtime memory protections. Exploitation requires the proxy logic to be enabled (i.e., the proxy request handling code path in an application using libcoap). |
| A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Explorer-TachyonCore-FindFileBySizeAndHash instruction prior V21.1. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform. |
| A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Nomad-GetCmContentLocations instruction prior V19.2. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform. |
| Use after free in Inbox COM Objects allows an unauthorized attacker to execute code locally. |
| Fickling is a Python pickling decompiler and static analyzer. Prior to version 0.1.7, the unsafe_imports() method in Fickling's static analyzer fails to flag several high-risk Python modules that can be used for arbitrary code execution. Malicious pickles importing these modules will not be detected as unsafe, allowing attackers to bypass Fickling's primary static safety checks. This issue has been patched in version 0.1.7. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: remove oem i2c adapter on finish
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter
registered resulting in a null pointer dereference when applications try
to access the invalid device.
(cherry picked from commit 89923fb7ead4fdd37b78dd49962d9bb5892403e6) |
| In the Linux kernel, the following vulnerability has been resolved:
net: phylink: add lock for serializing concurrent pl->phydev writes with resolver
Currently phylink_resolve() protects itself against concurrent
phylink_bringup_phy() or phylink_disconnect_phy() calls which modify
pl->phydev by relying on pl->state_mutex.
The problem is that in phylink_resolve(), pl->state_mutex is in a lock
inversion state with pl->phydev->lock. So pl->phydev->lock needs to be
acquired prior to pl->state_mutex. But that requires dereferencing
pl->phydev in the first place, and without pl->state_mutex, that is
racy.
Hence the reason for the extra lock. Currently it is redundant, but it
will serve a functional purpose once mutex_lock(&phy->lock) will be
moved outside of the mutex_lock(&pl->state_mutex) section.
Another alternative considered would have been to let phylink_resolve()
acquire the rtnl_mutex, which is also held when phylink_bringup_phy()
and phylink_disconnect_phy() are called. But since phylink_disconnect_phy()
runs under rtnl_lock(), it would deadlock with phylink_resolve() when
calling flush_work(&pl->resolve). Additionally, it would have been
undesirable because it would have unnecessarily blocked many other call
paths as well in the entire kernel, so the smaller-scoped lock was
preferred. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: kexec: initialize kexec_buf struct in load_other_segments()
Patch series "kexec: Fix invalid field access".
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are cleanly
set, preventing future instances of uninitialized memory being used.
An initial fix was already landed for arm64[0], and this patchset fixes
the problem on the remaining arm64 code and on riscv, as raised by Mark.
Discussions about this problem could be found at[1][2].
This patch (of 3):
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used. |
| In the Linux kernel, the following vulnerability has been resolved:
of_numa: fix uninitialized memory nodes causing kernel panic
When there are memory-only nodes (nodes without CPUs), these nodes are not
properly initialized, causing kernel panic during boot.
of_numa_init
of_numa_parse_cpu_nodes
node_set(nid, numa_nodes_parsed);
of_numa_parse_memory_nodes
In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes
containing CPUs. Memory-only nodes should have been updated in
of_numa_parse_memory_nodes, but they weren't.
Subsequently, when free_area_init() attempts to access NODE_DATA() for
these uninitialized memory nodes, the kernel panics due to NULL pointer
dereference.
This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes:
qemu-system-aarch64 \
-cpu host -nographic \
-m 4G -smp 1 \
-machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \
-object memory-backend-ram,size=2G,id=mem0 \
-object memory-backend-ram,size=2G,id=mem1 \
-numa node,nodeid=0,memdev=mem0 \
-numa node,nodeid=1,memdev=mem1 \
-kernel $IMAGE \
-hda $DISK \
-append "console=ttyAMA0 root=/dev/vda rw earlycon"
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
[ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: linux,dummy-virt
[ 0.000000] efi: UEFI not found.
[ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff]
[ 0.000000] node 1 must be removed before remove section 23
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 0.000000] Mem abort info:
[ 0.000000] ESR = 0x0000000096000004
[ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.000000] SET = 0, FnV = 0
[ 0.000000] EA = 0, S1PTW = 0
[ 0.000000] FSC = 0x04: level 0 translation fault
[ 0.000000] Data abort info:
[ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.000000] [00000000000000a0] user address but active_mm is swapper
[ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT
[ 0.000000] Hardware name: linux,dummy-virt (DT)
[ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : free_area_init+0x50c/0xf9c
[ 0.000000] lr : free_area_init+0x5c0/0xf9c
[ 0.000000] sp : ffffa02ca0f33c00
[ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000
[ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000
[ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368
[ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002
[ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001
[ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002
[ 0.0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: remove read access to debugfs files
The 'command' and 'netdev_ops' debugfs files are a legacy debugging
interface supported by the i40e driver since its early days by commit
02e9c290814c ("i40e: debugfs interface").
Both of these debugfs files provide a read handler which is mostly useless,
and which is implemented with questionable logic. They both use a static
256 byte buffer which is initialized to the empty string. In the case of
the 'command' file this buffer is literally never used and simply wastes
space. In the case of the 'netdev_ops' file, the last command written is
saved here.
On read, the files contents are presented as the name of the device
followed by a colon and then the contents of their respective static
buffer. For 'command' this will always be "<device>: ". For 'netdev_ops',
this will be "<device>: <last command written>". But note the buffer is
shared between all devices operated by this module. At best, it is mostly
meaningless information, and at worse it could be accessed simultaneously
as there doesn't appear to be any locking mechanism.
We have also recently received multiple reports for both read functions
about their use of snprintf and potential overflow that could result in
reading arbitrary kernel memory. For the 'command' file, this is definitely
impossible, since the static buffer is always zero and never written to.
For the 'netdev_ops' file, it does appear to be possible, if the user
carefully crafts the command input, it will be copied into the buffer,
which could be large enough to cause snprintf to truncate, which then
causes the copy_to_user to read beyond the length of the buffer allocated
by kzalloc.
A minimal fix would be to replace snprintf() with scnprintf() which would
cap the return to the number of bytes written, preventing an overflow. A
more involved fix would be to drop the mostly useless static buffers,
saving 512 bytes and modifying the read functions to stop needing those as
input.
Instead, lets just completely drop the read access to these files. These
are debug interfaces exposed as part of debugfs, and I don't believe that
dropping read access will break any script, as the provided output is
pretty useless. You can find the netdev name through other more standard
interfaces, and the 'netdev_ops' interface can easily result in garbage if
you issue simultaneous writes to multiple devices at once.
In order to properly remove the i40e_dbg_netdev_ops_buf, we need to
refactor its write function to avoid using the static buffer. Instead, use
the same logic as the i40e_dbg_command_write, with an allocated buffer.
Update the code to use this instead of the static buffer, and ensure we
free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on
multiple devices, and allows us to remove the now unused static buffer
along with removing the read access. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: gen_estimator: fix est_timer() vs CONFIG_PREEMPT_RT=y
syzbot reported a WARNING in est_timer() [1]
Problem here is that with CONFIG_PREEMPT_RT=y, timer callbacks
can be preempted.
Adopt preempt_disable_nested()/preempt_enable_nested() to fix this.
[1]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 __seqprop_assert include/linux/seqlock.h:221 [inline]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:__seqprop_assert include/linux/seqlock.h:221 [inline]
RIP: 0010:est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Call Trace:
<TASK>
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22c/0x710 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1043
smpboot_thread_fn+0x53f/0xa60 kernel/smpboot.c:160
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using
kmap_local_page(), which requires unmapping in Last-In-First-Out order.
The current code maps dst_pte first, then src_pte, but unmaps them in the
same order (dst_pte, src_pte), violating the LIFO requirement. This
causes the warning in kunmap_local_indexed():
WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c
addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx)
Fix this by reversing the unmap order to respect LIFO ordering.
This issue follows the same pattern as similar fixes:
- commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order")
- commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename")
Both of which addressed the same fundamental requirement that kmap_local
operations must follow LIFO ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
Add proper error checking for dmaengine_desc_get_metadata_ptr() which
can return an error pointer and lead to potential crashes or undefined
behaviour if the pointer retrieval fails.
Properly handle the error by unmapping DMA buffer, freeing the skb and
returning early to prevent further processing with invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Prevent recovery work from being queued during device removal
Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini()
to ensure that no new recovery work items can be queued after device
removal has started. Previously, recovery work could be scheduled even
after canceling existing work, potentially leading to use-after-free
bugs if recovery accessed freed resources.
Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better
reflect its new behavior. |
