| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: Clear the sg list when mapping an MR fails
rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA
mapping and registration can fail. On failure, __rds_rdma_map() unpins
the pages and frees the scatterlist, but rds_ib_free_frmr() can still
return the MR to the pool with the stale pointer set.
This leaves the pool with a dangling scatterlist and can lead to local
privilege escalation. KASAN detects the resulting use-after-free when the
MR is later torn down:
BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr
Read of size 8
Call Trace:
__rds_ib_teardown_mr
rds_ib_unreg_frmr
rds_ib_flush_mr_pool
rds_ib_flush_mrs
rds_free_mr
rds_setsockopt
Store the scatterlist in the MR only after DMA mapping succeeds. If DMA
mapping fails, return directly while the MR fields remain clear; the caller
keeps ownership of the scatterlist and its pinned pages. If a later
registration step fails, unmap the scatterlist and clear the MR fields
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl()
Map failure from pvr_mmu_map_sgl() interface was not returned correctly
to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to
continue instead of returning an error to caller.
Fix it by returning a proper error code from pvr_mmu_map_sgl() interface.
Call stack for crash:
[ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 1179.295067] Mem abort info:
[ 1179.297877] ESR = 0x0000000096000004
[ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1179.306987] SET = 0, FnV = 0
[ 1179.310048] EA = 0, S1PTW = 0
[ 1179.313198] FSC = 0x04: level 0 translation fault
[ 1179.318096] Data abort info:
[ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000
[ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000
[ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP
[ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6
[ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT
[ 1179.388120] Tainted: [D]=DIE
[ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT)
[ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr]
[ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr]
[ 1179.416848] sp : ffff8000839ab8c0
[ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000
[ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6
[ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247
[ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002
[ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
[ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480
[ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8
[ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007
[ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000
[ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000
[ 1179.491433] Call trace:
[ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P)
[ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr]
[ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr]
[ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm]
[ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm]
[ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr]
[ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr]
[ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr]
[ 1179.534018] drm_ioctl_kernel+0xb8/0x128
[ 1179.537941] drm_ioctl+0x21c/0x4ec
[ 1179.541337] __arm64_sys_ioctl+0xac/0x108
[ 1179.545344] invoke_syscall+0x44/0x100
[ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0
[ 1179.553790] do_el0_svc+0x1c/0x28
[ 1179.557106] el0_svc+0x34/0xf0
[ 1179.560159] el0t_64_sync_handler+0xd0/0xe4
[ 1179.564334] el0t_64_sync+0x198/0x19c
[ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421)
[ 1179.574081] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: fix incorrect RCU teardown order
i915_gem_busy_ioctl uses dma_resv_for_each_fence_unlocked() to iterate
over the fences in an GEM object without holding a reference but only
the RCU read side lock.
What can happen here is that the GEM object is destroyed concurrently
while i915_gem_busy_ioctl is still running. This won't free the GEM
objects memory, but still drops all the dma_fence references.
Now when dma_resv_for_each_fence_unlocked() sees a destroyed dma_fence it
assumes that a new fence list was installed and re-starts the loop.
But in the case of a destroyed GEM object a new fence list is never
installed, only the old one freed and therefore the iteration never
finishes resulting in an endless loop.
The solution is to drop the fence references only after the RCU grace
period.
The fixes tag is not necessary the patch introducing the problem, but the
one making it so worse that we need to address it.
This problem was pointed out by Sashiko-bot.
(cherry picked from commit 5113479556025093bf8133bb2dcaa33be2d50921) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix runtime PM leak in amdgpu_debugfs_test_ib_show()
amdgpu_debugfs_test_ib_show() resumes the device with
pm_runtime_get_sync() before taking the reset domain semaphore with
down_write_killable(). If the write lock acquisition is interrupted,
the function returns without calling pm_runtime_put_autosuspend(),
leaking the runtime PM reference acquired for the device and keeping
the GPU awake.
Drop the runtime PM reference on the interrupted down_write_killable()
error path before returning.
(cherry picked from commit ec30a576c2d4c0364549e6c04218f50704ef56c8) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM
nouveau_uvmm_sm() calls op_map(), which passes bo->resource through
nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads
mem->mem.type.
But this is only valid when bo->resource is backed by struct nouveau_mem,
as is the case for VRAM and TT resources. If the BO is left in
TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it
as struct nouveau_mem makes the mem->mem.type read past the end of the
resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm
report:
BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report+0xca/0x100 mm/kasan/report.c:595
nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline]
nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532
nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline]
nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364
drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061
process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322
process_scheduled_works kernel/workqueue.c:3405 [inline]
worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486
kthread+0x31d/0x420 kernel/kthread.c:436
ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 2224 on cpu 0 at 66.550027s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106
dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205
ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721
ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856
ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970
nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359
nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272
nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352
drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914
nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583
do_syscall_x64 ar
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix bridge reference leak in nv1a_ram_new()
pci_get_domain_bus_and_slot() takes a reference to the PCI device,
which is never released once the memory size has been read from its
config space. Drop the reference before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix gem reference leak in validate_init()
On the ttm_bo_reserve() failure and "vma not found" error paths, the
loop breaks without adding the looked-up object to any validate list,
so the reference taken by drm_gem_object_lookup() is never released;
validate_fini() only walks the spliced lists. Drop the reference
before breaking out on both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix runtime PM leak in nouveau_connector_detect()
If nvif_outp_edid_get() fails, nouveau_connector_detect() returns
early without dropping the runtime PM reference taken at the start
of the function, keeping the device powered on until the next
successful detect.
Balance the reference on the error path like the other exit paths
do. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: RCU-free the scheduler-containing nouveau_sched
struct nouveau_sched embeds a struct drm_gpu_scheduler (base).
nouveau_sched_destroy() calls nouveau_sched_fini() (which does
drm_sched_fini(&sched->base)) and then frees the object with plain
kfree(sched).
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace via drm_syncobj /
sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(),
and a later get_timeline_name() -- reachable unprivileged through
SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free
read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
object with kfree_rcu() instead of kfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()
nouveau_bo_pin_locked() checks whether an already pinned BO is in a
memory domain compatible with a new pin request. When the domains are
incompatible, it sets -EBUSY but still calls ttm_bo_pin() before
returning.
Callers treat a failed nouveau_bo_pin() as not having acquired a new pin,
so the extra pin count is never decreased by a matching unpin.
This triggers the warning in ttm_bo_release():
WARN_ON_ONCE(bo->pin_count);
Found when fuzzing the nouveau driver with a modified Syzkaller:
WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212
Modules linked in:
CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy)
nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256
Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8
msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-...
RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36
RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8
msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55
R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290
R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline]
ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330
nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90
drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165
kref_put include/linux/kref.h:65 [inline]
__drm_gem_object_put include/drm/drm_gem.h:562 [inline]
drm_gem_object_put include/drm/drm_gem.h:575 [inline]
nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195
nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000
nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225
nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284
nouveau 0000:01:00.0: syz.2.23[2209]: validate_init
drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438
__fput+0x39c/0xa60 fs/file_table.c:512
nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2
task_work_run+0x15a/0x230 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x82b/0x25a0 kernel/exit.c:1009
do_group_exit+0xc2/0x280 kernel/exit.c:1152
get_signal+0x1d6e/0x1f30 kernel/signal.c:3046
arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:66 [inline]
exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix NULL pointer dereference on fence allocation failure
virtio_gpu_fence_alloc() can fail due to memory pressure and return NULL,
but its caller like virtio_gpu_init_submit() never checks it. Later,
virtio_gpu_init_submit() passes the NULL fence to
virtio_gpu_fence_event_create(), which unconditionally dereferences it.
Found when fuzzing the virtio driver with Syzkaller:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 1 UID: 0 PID: 9991 Comm: syz.0.121 Not tainted 7.2.0 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline]
RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00
RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d
RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090
RBP: 0000000000000000 R0virtio_gpu_virgl_process_cmd: ctrl 0x102, error 0x1203
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000
R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b
FS: 00007fab480b96c0(0000) GS:ffff8880eb6e9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007effbf5e55a8 CR3: 0000000048d19000 CR4: 0000000000350ef0
Call Trace:
<TASK>
drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fab471a82bd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fab480b9018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fab47435fa0 RCX: 00007fab471a82bd
RDX: 00002000000000c0 RSI: 00000000c0406442 RDI: 0000000000000003
RBP: 00007fab480b9080 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007fab47436038 R14: 00007fab47435fa0 R15: 00007ffe85ab0740
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline]
RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00
RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d
RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000
R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b
FS: 00007fab480b96c0(0000) GS:ffff888098ae9000(0000) knlGS:00000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold()
damon_hugetlb_mkold() reads the page table entry into a local variable,
unsets the accessed bit in the variable, and updates the page table entry
with the updated variable value. If hardware updates the same page table
entry in parallel, the hw updates could be lost. For example,
hardware-updated dirty bits might be lost.
Avoid the parallel updates by clearing the page table entry when reading
it together, using huge_ptep_get_and_clear(). If a parallel write to the
memory is made after the clearing, the hw will see the page table entry is
cleared, trigger page fault and wait until it is handled. The page fault
handling will wait for damon_hugetlb_mkold() due to the page table lock.
Because hugetlbfs is an in-memory file system and hugetlb pages cannot be
reclaimed, no critical issue is expected to my best knowledge. But
definitely this is a nasty bug that should be fixed sooner rather than
later.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
packet: use ubuf_info completion for TX_RING packets
tpacket_snd sends skbs with frags pointing into its ring slots. Slots
are released when skb->destructor is called.
A call to skb_orphan calls skb->destructor before the skb is freed.
This can cause the slot to be reused while still linked into the skb.
Switch to standard zerocopy completion (ubuf_info) so the slot is only
released once all references to the payload are freed or copied.
Restore skb->destructor to standard sock_wfree.
The ubuf_info completion callback can be called with a NULL skb, but
only from net_zcopy_put and related API, used by zerocopy implementations
that hold their own reference on the uarg, such as MSG_ZEROCOPY. This
uarg is only ever completed from skb_zcopy_clear, so skb is always set.
To prevent userspace from aliasing in-flight state on shared ring
slots, allocate tpacket_uarg per packet, rather than per slot. This
adds a small allocation to the transmit path. Use standard kmalloc to
allow backporting to stable kernels.
The uarg holds an sk_wmem_alloc reference, rather than an sk_refcnt
reference. packet_free_tx_ring waits on sk_wmem_alloc before freeing
the ring pages. Always allocate vec->deferred for tx_ring so page-backed
rings also wait on sk_wmem_alloc when skb_copy_ubufs drops page refs
before calling tpacket_ubuf_complete.
Drop the tx_ring.pg_vec test that tpacket_destruct_skb performed before
accessing the slot. The sk_wmem_alloc reference now guarantees that the
slot is valid. The test is also not sufficient by itself, as it reads
pg_vec without pg_vec_lock, so it can race with packet_set_ring.
As a result a slot is released when its payload is copied, which can
be before transmission (e.g., in skb_orphan_frags_rx). If copied
before skb_tx_timestamp() is called, no slot timestamp is recorded,
similar to when skb_orphan() was called early in the datapath before
this patch.
Revert the now unused previous skb_zcopy_.._nouarg infra.
Depends on commit 992cc9f94ca9 ("net/packet: defer vmalloc TX_RING
free until skbs finish"). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce()
The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an
invalid offset to hid_field_extract(), resulting in memory reads at
incorrect addresses -- possibly beyond the end of the report. If a
field in the HID descriptor lists more usages than its Report Count
actually reserves space for, the function's inner 'j' will walk past
the end of the field:
for (i = 0; i < report->maxfield; i++) {
for (j = 0; j < report->field[i]->maxusage; j++) {
...
value = hid_field_extract(hdev, raw_data + 1,
offset + j * size, size);
A descriptor listing 12288 usages against Report Count 1 has the loop
extract the usage at index 12287 from bit offset 98296 -- about 12 KB
past a 2-byte received report. The value is stored in
wacom_wac->serial[0] and can reach userspace as an MSC_SERIAL event,
making this an information disclosure.
Clamp the loop to field->report_count, the number of value slots the
report holds. Value slots past the last declared usage are still
scanned; they reuse that usage (HID 1.11, 6.2.2.8).
Verified on v6.12.105 with a UHID reproducer: a 2-byte report from
such a descriptor trips KASAN before the patch and not after it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix swapped IPv6 IPsec policy masks
IPv6 XFRM policies may use different source and destination prefix
lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks
independently, but setup_fte_addr6() installs each mask in the opposite
address field.
When the prefix lengths differ, this makes the source match use the
destination prefix and the destination match use the source prefix. The
resulting hardware rule can both miss traffic covered by the policy and
match traffic outside it.
Install each mask in its corresponding match field. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up committing both but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels and adds the new extension
for that breaking the pointer in the expectation list causing
UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where committing both clones without modifications
into the same zone is needed. So, let's just reset the entry in case
for some reason we got an skb with a shared one during commit. This
doesn't affect any known use cases, but avoids any potential problems
with sharing and modification of the unconfirmed ct entry.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mdb: restart port group walk after deletion
br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking
mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through
br_multicast_sg_del_exclude_ports() and unlink other port groups. If the
cursor points into one of those groups, the next iteration dereferences a
stale cursor and can leave mp->ports pointing at freed memory.
A following RTM_GETMDB exposes the dangling pointer:
BUG: KASAN: slab-use-after-free in br_mdb_dump
Read of size 8
br_mdb_dump
rtnl_mdb_dump
rtnl_dumpit
netlink_dump
Reset the cursor to mp->ports after every deletion. The deletion removes at
least the selected group, so the restarted walk always makes progress. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix MMIO read buffer leak on probe failure
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in the probe error path
before releasing the remaining device resources.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: fix use-after-free in nfc_get_local_general_bytes
Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by
nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by
invoking nfc_llcp_local_put(local) after accessing local->gb. However,
if the reference count drops to zero, local is freed immediately,
leading to a use-after-free when callers access the returned pointer.
Alternative approaches using dynamic allocation (e.g. kmemdup) introduced
memory leaks because callers consistently treat the returned pointer as
borrowed memory.
Fix this properly by refactoring nfc_llcp_general_bytes() and
nfc_get_local_general_bytes() to accept a caller-provided output buffer
(out_gb) and its maximum length (gb_max_len). The general bytes are
safely copied into out_gb before calling nfc_llcp_local_put(local),
ensuring safe lifetime management without ownership transfer complications.
Update all callers across drivers (microread, pn533, pn544, st21nfca,
digital_dep, and nci) to provide their own destination buffers and pass
them to nfc_get_local_general_bytes(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: drop truncated I/RR/RNR PDUs in nfc_llcp_recv_hdlc()
nfc_llcp_recv_hdlc() reads the sequence byte skb->data[2], via
nfc_llcp_ns()/nfc_llcp_nr(), before any length check. The receive path
only guarantees the two-byte LLCP header -- __nfc_llcp_recv() checks it
with pskb_may_pull() and nfc_llcp_recv_agf() admits two-byte inner PDUs
-- so a two-byte I, RR or RNR PDU reads one byte of uninitialised skb
tailroom. The byte becomes N(R)/N(S); a peer can already set those with
a well-formed PDU, so this is acting on uninitialised memory, not new
peer control.
Guard the read with pskb_may_pull(), as commit 95674f506c63 ("nfc: llcp:
reject PDUs shorter than the LLCP header") did for the two-byte header,
so the sequence byte is present and linear before it is read. RR and RNR
PDUs are LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE bytes and an I PDU is
longer, so no valid frame is rejected; a truncated PDU is malformed, so
return without a DM reply. |
