| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The RegistrationMagic – Custom Registration Forms, User Registration, Payment, and User Login plugin for WordPress is vulnerable to payment bypass due to insufficient verification of data authenticity on the 'process_paypal_sdk_payment' function in all versions up to, and including, 6.0.6.9. This is due to the plugin trusting client-supplied values for payment verification without validating that the payment actually went through PayPal. This makes it possible for unauthenticated attackers to bypass paid registration by manipulating payment status and activating their account without completing a real PayPal payment. |
| A flaw has been found in CodeCanyon/ui-lib Mentor LMS up to 1.1.1. Affected by this vulnerability is an unknown functionality of the component API. Executing manipulation can lead to permissive cross-domain policy with untrusted domains. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Authorize.net Payment Gateway For WooCommerce plugin for WordPress is vulnerable to payment bypass in all versions up to, and including, 8.0. This is due to the plugin not properly verifying the authenticity of the request that updates a orders payment status. This makes it possible for unauthenticated attackers to update order payment statuses to paid bypassing any payment. |
| Incorrect access control in Mirotalk before commit 9de226 allows attackers to arbitrarily change usernames via sending a crafted roomAction request to the server. |
| eGovFramework/egovframe-common-components versions up to and including 4.3.1 includes Web Editor image upload and related file delivery functionality that uses symmetric encryption to protect URL parameters, but exposes an encryption oracle that allows attackers to generate valid ciphertext for chosen values. The image upload endpoints /utl/wed/insertImage.do and /utl/wed/insertImageCk.do encrypt server-side paths, filenames, and MIME types and embed them directly into a download URL that is returned to the client. Because these same encrypted parameters are trusted by other endpoints, such as /utl/web/imageSrc.do and /cmm/fms/getImage.do, an unauthenticated attacker can abuse the upload functionality to obtain encrypted representations of attacker-chosen identifiers and then replay those ciphertext values to file-serving APIs. This design failure allows an attacker to bypass access controls that rely solely on the secrecy of encrypted parameters and retrieve arbitrary stored files that are otherwise expected to require an existing session or specific authorization context. KISA/KrCERT has identified this unpatched vulnerability as "KVE-2023-5281." |
| Deck Mate 1 executes firmware directly from an external EEPROM without verifying authenticity or integrity. An attacker with physical access can replace or reflash the EEPROM to run arbitrary code that persists across reboots. Because this design predates modern secure-boot or signed-update mechanisms, affected systems should be physically protected or retired from service. The vendor has not indicated that firmware updates are available for this legacy model. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In Sipwise rtpengine before 13.4.1.1, an origin-validation error in the endpoint-learning logic of the media-relay core allows remote attackers to inject or intercept RTP/SRTP media streams via RTP packets (except when the relay is configured for strict source and learning disabled). Version 13.4.1.1 fixes the heuristic mode by limiting exposure to the first five packets, and introduces a recrypt flag that fully prevents SRTP attacks when both mitigations are enabled. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW . An attacker can update the system firmware with a specially crafted image. |
| A Generation of Predictable Numbers or Identifiers vulnerability in the SDM component of B&R Automation Runtime versions before 6.4 may allow an unauthenticated network-based attacker to take over already established sessions. |
| An improper verification of cryptographic signature in Zscaler's SAML authentication mechanism on the server-side allowed an authentication abuse. |
| An improper verification of a loaded library in Zscaler Client Connector on Mac < 4.2.0.241 may allow a local attacker to elevate their privileges. |
| Insufficient data authenticity verification vulnerability in Janto, versions prior to r12. This allows an unauthenticated attacker to modify the content of emails sent to reset the password. To exploit the vulnerability, the attacker must create a POST request by injecting malicious content into the ‘Xml’ parameter on the ‘/public/cgi/Gateway.php’ endpoint. |
| Formbricks is an open source qualtrics alternative. Prior to version 4.0.1, Formbricks is missing JWT signature verification. This vulnerability stems from a token validation routine that only decodes JWTs (jwt.decode) without verifying their signatures. Both the email verification token login path and the password reset server action use the same validator, which does not check the token’s signature, expiration, issuer, or audience. If an attacker learns the victim’s actual user.id, they can craft an arbitrary JWT with an alg: "none" header and use it to authenticate and reset the victim’s password. This issue has been patched in version 4.0.1. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| RICOH Streamline NX V3 PC Client versions 3.5.0 to 3.7.0 contains an issue with use of less trusted source, which may allow an attacker who can conduct a man-in-the-middle attack to eavesdrop upgrade requests and execute a malicious DLL with custom code. |
| There is a vulnerability in the BMC firmware image authentication design
at Supermicro MBD-X12DPG-OA6
. An attacker can modify the firmware to bypass BMC inspection and bypass the signature verification process |
| The SimpleSAMLphp SAML2 library is a PHP library for SAML2 related functionality. Prior to versions 4.17.0 and 5.0.0-alpha.20, there is a signature confusion attack in the HTTPRedirect binding. An attacker with any signed SAMLResponse via the HTTP-Redirect binding can cause the application to accept an unsigned message. Versions 4.17.0 and 5.0.0-alpha.20 contain a fix for the issue. |
| Authentication issue that does not verify the source of a packet which could allow an attacker to create a denial-of-service condition or modify the configuration of the device. |
