| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix unit conversions in per_binval computation
LOLLM noticed that we're doing the unit conversion in the per_binval
computation backwards -- xfs_buf_inval_log_space's second parameter is
supposed to be in bytes, but max_binval is in units of fsblocks. Hence
the conversion should be FSB -> B, not the other way around. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't return -EINVAL for successful nested thaw
Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices")
replaced the freeze_holders bitmask with per-holder counters to allow
nested freezes. In the bitmask version, a thaw that released a shared
hold while another holder remained returned 0. Since the rework,
thaw_super_locked() drops the freeze reference via freeze_dec() but
then returns -EINVAL when other freezers remain, misinforming the
caller: the thaw did succeed, the superblock just stays frozen for the
remaining holders.
This breaks bdev-initiated freezing. When a filesystem is frozen with
FIFREEZE and additionally frozen via bdev_freeze() -- which nests by
design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives
-EINVAL from the holder op although its freeze reference was dropped,
and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's
unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances
the count. After the user's FITHAW and umount, the block device can
never be mounted again:
dm-1: Can't mount, blockdev is frozen
There is no way for userspace to drop the leaked count; only
destroying the block device (or a reboot) recovers the device.
Reproducer (any kernel since v6.8):
dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0"
mkfs.ext4 /dev/mapper/dut
mount /dev/mapper/dut /mnt
fsfreeze --freeze /mnt # freeze_ucount == 1
dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2
dmsetup resume dut # ucount 2 -> 1, but thaw_super()
# returns -EINVAL, so bdev_thaw()
# keeps bd_fsfreeze_count at 1
fsfreeze --unfreeze /mnt # filesystem thaws fine
umount /mnt
mount /dev/mapper/dut /mnt # EBUSY, forever
The same happens with fsfreeze held across an LVM snapshot of the
origin volume.
fs_bdev_thaw()'s documentation already describes the intended
semantics: "If this function returns zero it doesn't mean that the
filesystem is unfrozen as it may have been frozen multiple times".
Restore them by returning 0 when a nested thaw drops its hold while
other freezers remain. Thawing without holding a freeze still fails
with -EINVAL as may_unfreeze() rejects that case before the reference
count is touched. |
| In the Linux kernel, the following vulnerability has been resolved:
net: net_failover: Fix the deadlock in net_failover_slave_name_change()
This is a sibling fix of commit
b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register").
There is netdev_lock_ops() in the upper callers, so using netif_open()
instead of dev_open().
Call Trace:
__schedule+0x2bb/0x650
schedule+0x27/0xb0
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x550/0xaf0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_open+0x3b/0xe0
net_failover_slave_name_change+0x22/0x40
failover_event+0xd4/0x1e0
notifier_call_chain+0x62/0xf0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x50/0x80
netif_change_name+0x200/0x330
do_setlink.isra.0+0xb12/0xdf0
? security_capable+0x9a/0x1e0
? ns_capable+0x31/0x60
rtnl_setlink+0x302/0x670
? netlink_recvmsg+0x296/0x340
? security_capable+0x9a/0x1e0
? __pfx_rtnl_setlink+0x10/0x10
rtnetlink_rcv_msg+0x384/0x460
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x61/0x120
rtnetlink_rcv+0x15/0x30
netlink_unicast+0x28f/0x3c0
netlink_sendmsg+0x216/0x450
__sys_sendto+0x222/0x230
__x64_sys_sendto+0x24/0x40
x64_sys_call+0x1d5d/0x2390
do_syscall_64+0x105/0x5a0
? do_syscall_64+0x140/0x5a0
? exc_page_fault+0x94/0x1e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix wrong return code to engine in asynch callbacks
When crypto_finalize_hash_request() or
crypto_finalize_skcipher_request() explicitly completes a request, the
do_one_request callback must return 0 to indicate successful
handling. Returning a negative error code causes the crypto engine to
assume the driver failed to take ownership and triggers a second
completion via crypto_request_complete(), resulting in a double
completion. This pattern occurs in paes_s390.c 4 times and once in
phmac_s390.c.
Fixed in phmac_do_one_request() and all four paes do_one_request
callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit
finalization instead of propagating the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
> kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> <TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/s390: Fix NULL dereference in iova_to_phys() with ZPCI_TABLE_TYPE_RFX
When using a 5-level translation table via ZPCI_TABLE_TYPE_RFX
get_rso_from_iova() returns NULL when the region-first entry is invalid.
Yet in get_rto_from_iova() the region-second origin rso is not checked
to be non-NULL before accessing rso[rsx] leading to a NULL pointer
dereference instead of a NULL return when iova_to_phys() is called on
a unmapped IOVA. Fix this by adding the missing NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly
When hardware persistently returns -EBUSY after exhausting retries,
the error propagates to crypto_finalize_*_request(). The crypto API's
completion wrapper treats -EBUSY as a queueing status and swallows it,
preventing the completion callback from firing. This causes callers
using crypto_wait_req() to block indefinitely.
Translate persistent -EBUSY to -EIO after retry exhaustion to ensure
proper error propagation and callback invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: tag_brcm: legacy FCS: request needed tailroom
The legacy FCS tagger calculates the CRC over skb->len bytes starting at
skb->data. When a nonlinear skb reaches the tagger, this reads past the
linear head into unrelated slab memory.
The tagger appends an Ethernet FCS but does not declare that tailroom. As a
result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user
port, and nonlinear skbs can reach the CRC calculation.
Declare the required tailroom. DSA will then clear those features and the
networking core will linearize skbs before the tagger runs.
A KASAN-enabled dsa_loop test using this tagger reports:
BUG: KASAN: slab-out-of-bounds in crc32_le
Read of size 1 at addr ffff8880397086c0 by task exp/135
Call Trace:
crc32_le (lib/crc/crc32-main.c:38)
brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343)
dsa_user_xmit (net/dsa/user.c:942)
dev_hard_start_xmit (net/core/dev.c:3937)
__dev_queue_xmit (net/core/dev.c:4926)
packet_sendmsg (net/packet/af_packet.c:3110)
__sys_sendto (net/socket.c:2281)
The buggy address belongs to the object at ffff888039708400
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ffff888039708400, ffff8880397086c0) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: lock the healthmon when inserting unmount event
LOLLM complains that xfs_healthmon_unmount does an unlocked insert of
the unmount event into the health monitor's event list. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid DPMS-on for phantom stream
[Why & How]
Calling dc_update_planes_and_stream separately for stream and its
phantom stream causes a NULL pointer dereference, since the phantom is
destroyed on the first call.
Skip the call for phantom streams. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8365-afe-pcm: fix possible NULL-pointer dereferences in mt8365_afe_suspend()
mt8365_afe_suspend() allocates the register backup buffer with
devm_kcalloc(), but does not check for allocation failure before using the
returned pointer. This may lead to a NULL pointer dereference when
accessing afe->reg_back_up[i].
Add the missing NULL check and return -ENOMEM on allocation failure after
disabling the main clock.
Also propagate the return value of mt8365_afe_suspend() in
mt8365_afe_dev_runtime_suspend() so that the suspended state is not updated
when suspend fails. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Fix unmatched rn_unregister on failed accept
When svc_rdma_accept() takes the errout path before
rpcrdma_rn_register() has succeeded, the existing cleanup block
calls rpcrdma_rn_unregister(dev, &newxprt->sc_rn) unconditionally.
svcxprt_rdma is kzalloc'd, so on that path sc_rn.rn_index is 0 and
sc_rn.rn_done is NULL; the unregister therefore xa_erase()s another
caller's slot 0 and performs an unmatched kref_put() on the
rpcrdma_device's rd_kref.
The same errout also brackets the cleanup with svc_xprt_get()/
svc_xprt_put() around the kref_init() birth reference. The kref
goes 1 -> 2 -> 1 and never reaches 0, so the svcxprt_rdma (and the
net/ns_tracker it pinned) is leaked on every failed accept.
rpcrdma_rn_register() writes rn->rn_done last, only after xa_alloc()
and kref_get() have both succeeded, so rn_done == NULL is a natural
"never registered" sentinel. Guard rpcrdma_rn_unregister() with an
early return when rn_done is NULL, and clear rn_done before the
matching xa_erase() so a repeated unregister is also a no-op.
With that guard in place, the accept errout drops the kref_init()
birth reference via svc_xprt_put(), which dispatches svc_rdma_free().
Teardown of sc_qp, sc_sq_cq, sc_rq_cq, and sc_pd runs under existing
IS_ERR/NULL guards in svc_rdma_free(); sc_rn is covered by the new
rn_done sentinel; sc_cm_id is non-NULL on every errout path because
svc_rdma_accept() dereferences it above the first goto errout.
svc_xprt_free() drops the module reference associated with the freed
transport, and svc_handle_xprt() drops its pre-acquired reference
when ->xpo_accept() returns NULL. Take a replacement module reference
before svc_xprt_put() so the two module_put()s remain balanced.
The rn_done guard also covers svc_rdma_free()'s non-listener call
to rpcrdma_rn_unregister() for transports whose register attempt
failed or never ran. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix boot panic with CONFIG_DEBUG_VM and HVO bootmem pages
Patch series "mm: Refactor bootmem gigantic hugepage allocation", v4.
This series is split out from the earlier larger series "mm: Generalize
HVO for HugeTLB and device DAX" [1]. It collects the first 19 patches of
that series as a standalone set of fixes and preparatory cleanups around
bootmem HugeTLB handling, sparse initialization ordering, and related
vmemmap setup.
The first patches fix a few bugs found while reviewing the existing code,
including incorrect bootmem HVO handling, wrong vmemmap registration
arguments, a powerpc compound-vmemmap tracking bug, and too-late
initialization of gigantic bootmem HugeTLB struct pages.
The rest of the series reorders early memory initialization so the
relevant zone state is available before sparse and HugeTLB boot-time setup
runs, then simplifies the remaining bootmem gigantic hugepage allocation
path and removes code made obsolete by that rework.
At a high level:
- patches [1-4] fix boot-time and arch-specific bugs
- patches [5-12] reorder and simplify sparse/mm/hugetlb early init
- patches [13-19] refactor bootmem gigantic hugepage allocation and
remove obsolete helpers and state
This patch (of 19):
Commit 622026e87c40 ("mm/hugetlb: remove fake head pages") switched
HVO to reuse per-zone shared tail pages from zone->vmemmap_tails[].
Those shared tail pages were initialized in hugetlb_vmemmap_init(), but
bootmem HugeTLB folios are prepared earlier from
gather_bootmem_prealloc(). With hugetlb_free_vmemmap=on,
prep_and_add_bootmem_folios() can access pageblock flags on bootmem
HugeTLB pages whose mirrored tail struct pages already point to the shared
tail page. On CONFIG_DEBUG_VM kernels, get_pfnblock_bitmap_bitidx() then
dereferences the still-uninitialized shared tail page and can panic during
boot.
Initialize zone->vmemmap_tails[] from gather_bootmem_prealloc(), before
bootmem HugeTLB folios are processed, and drop the later initialization
from hugetlb_vmemmap_init().
This bug only affects CONFIG_DEBUG_VM kernels, where the relevant
assertion is evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: fix NULL pointer deref in vdec_try_fmt_common
When VIDIOC_TRY_FMT is called with an unsupported pixel format on the
OUTPUT queue, vdec_try_fmt_common() falls back to V4L2_PIX_FMT_MPEG2.
However, if a distro has locally patched MPEG2 support out (as it has
been broken for some time) the platform format table does not contain
MPEG2 so find_format() returns NULL and the subsequent dereference of
fmt_out->max_width triggers a NULL pointer dereference.
Fix this by falling back to the first format in the platform's format
array instead of hardcoding V4L2_PIX_FMT_MPEG2. This is always valid
since every platform defines at least one format. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
Currently, when exiting to kernel mode, we attempt involuntary
preemption. The preemption logic expects IRQs to be disabled, which is
why we call local_irq_disable() before attempting preemption.
However, depending on the context, local_irq_disable() may be
unnecessary:
- __el1_irq(), the non-NMI EL1 IRQ path, already has IRQs disabled, so
local_irq_disable() is redundant.
- irqentry_exit_to_kernel_mode_preempt() immediately returns when
exiting from an NMI-like context, so calling local_irq_disable()
beforehand is unnecessary work.
Furthermore, it confuses the pNMI state tracking when we are in a
context with interrupts disabled and the GIC_PRIO_PSR_I_SET bit is set
in the PMR, leading to a warning when
CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y:
WARNING: ./arch/arm64/include/asm/irqflags.h:63 at arm64_exit_to_kernel_mode+0xb8/0xc0, CPU#40: retsnoop/31805
CPU: 40 UID: 0 PID: 31805 Comm: retsnoop Not tainted 7.2.0-rc6-next-20260805 #7 PREEMPTLAZY
pstate: 234013c9 (nzCv DAIF +PAN -UAO +TCO +DIT +SSBS BTYPE=--)
pc : arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63)
lr : el1_abort (arch/arm64/kernel/entry-common.c:323)
pmr: 000000f0
Call trace:
arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63) (P)
el1_abort (arch/arm64/kernel/entry-common.c:323)
el1h_64_sync_handler (arch/arm64/kernel/entry-common.c:449)
el1h_64_sync (arch/arm64/kernel/entry.S:589)
[...]
Split arm64_exit_to_kernel_mode() into preempt, non-preempt, and
dispatch parts so that we can avoid this extra work where it is not
needed and avoid breaking the pNMI tracking logic. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5-ppl: fix use-after-free in ppl_do_flush()
The loop in ppl_do_flush() continues iterating after calling
ppl_io_unit_finished(), touching io->pending_flushes and leading to a
use-after-free.
Add a break statement to stop the loop once io is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: initialize DRC hash table before registering shrinker
shrinker_register() precedes the INIT_LIST_HEAD loop and the
drc_hashsize store. On weakly-ordered architectures (arm64, ppc),
a shrinker scan can observe drc_hashsize before the bucket list
heads are initialized, causing a NULL deref in the DRC shrinker
callback.
Move bucket initialization and the drc_hashsize store before
shrinker_register() so the hash table is fully initialized before
it becomes visible to the shrinker. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: guard nfsd_serv deref in nfsd_file_net_dispose
nfsd_file_net_dispose() is the consumer side of l->freeme: the nfsd
service thread loop calls it to drain entries that the filecache
garbage collector and shrinker append via
nfsd_file_dispose_list_delayed(). During per-net teardown,
nn->nfsd_serv is cleared before the filecache laundrette is shut
down, so the service thread can still run a dispose pass that finds
more than eight entries on l->freeme and dereferences a NULL
svc_serv:
nfsd service thread loop
nfsd_file_net_dispose(nn)
if (!list_empty(&l->freeme)) {
...
svc_wake_up(nn->nfsd_serv); /* nn->nfsd_serv == NULL */
}
The sibling helper nfsd_file_dispose_list_delayed() already documents
this ordering and caches nn->nfsd_serv into a local before testing it
for NULL. nfsd_file_net_dispose() was introduced with the same raw
svc_wake_up(nn->nfsd_serv) call and never picked up the guard.
Fix by loading nn->nfsd_serv into a local svc_serv pointer and only
calling svc_wake_up() when it is non-NULL, matching the pattern in
nfsd_file_dispose_list_delayed(). |
