| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix BSG job leak on validate flash image error path
qla28xx_validate_flash_image() returns QLA_SUCCESS (0) unconditionally,
telling the FC BSG transport (fc_bsg_host_dispatch()) that the driver
owns and will complete the request. But bsg_job_done() is guarded by "if
(!rval)", so on the error path (rval == -EINVAL) neither the driver nor
the transport completes the job. The request dangles until it times out,
leaking block layer resources.
Commit c2c68225b145 ("scsi: qla2xxx: Fix bsg_done() causing double
free") added the "if (!rval)" guard to a batch of BSG handlers. That is
correct for handlers that also return the error code (the transport then
completes the job once via fail_host_msg), but this function returns
QLA_SUCCESS unconditionally, so the guard turned a correct single
completion into a leak.
Always call bsg_job_done(): bsg_reply->result is DID_OK and the error is
reported in vendor_rsp[0], and since the function returns 0 the
transport will not complete the job a second time. |
| In the Linux kernel, the following vulnerability has been resolved:
media: intel/ipu6: fix async notifier cleanup leak on parse error
isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode
remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an
endpoint parse or add fails partway through the loop, it jumps to
err_parse and returns without calling v4l2_async_nf_cleanup(), leaking
every v4l2_async_connection already added to the notifier's waiting
list.
The register-failure path just below already cleans up correctly, and
the caller only tears the notifier down (isys_notifier_cleanup()) once
isys_notifier_init() has returned success. Clean up the notifier on the
parse error path too. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: core: Fix kmemleak due to missed rc_free_device() call
The commit dccc0c3ddf8f ("media: rc: fix race between unregister and
urb/irq callbacks") removed the implicit call to rc_free_device() from
rc_unregister_device(). However, the commit missed to remove the NULL
assignment of adap->rc that is now causing rc_free_device() to never be
called on an allocated rc device.
kmemleak reports following after e.g. dw-hdmi unbind:
unreferenced object 0xffff00010ac10000 (size 4096):
comm "kworker/u16:1", pid 39, jiffies 4294897739
hex dump (first 32 bytes):
20 23 4b 0a 01 00 ff ff 08 00 c1 0a 01 00 ff ff #K.............
08 00 c1 0a 01 00 ff ff 00 00 00 00 00 00 00 00 ................
backtrace (crc e11baccc):
kmemleak_alloc+0x38/0x44
__kmalloc_cache_noprof+0x4a8/0x5e0
rc_allocate_device+0x48/0x2a0
cec_allocate_adapter+0x3ac/0x800
dw_hdmi_cec_probe+0x264/0x634
platform_probe+0xc0/0x188
really_probe+0x4a4/0x8e0
__driver_probe_device+0x2f8/0x440
driver_probe_device+0x60/0x160
__device_attach_driver+0x1a0/0x2a0
bus_for_each_drv+0x100/0x1a0
__device_attach+0x174/0x350
device_initial_probe+0x90/0xb0
bus_probe_device+0x4c/0x120
device_add+0xdec/0x116c
platform_device_add+0x354/0x598
Remove the assignment of adap->rc to NULL to let cec_delete_adapter()
free the allocated rc device after last user of the cec device exits to
fix the kmemleak. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup
snd_ice1712_probe() performs multiple initialization steps after
snd_card_new(), but directly returns on failures from later steps
without releasing the ALSA card, causing resource leaks when
probing fails.
Use snd_devm_card_new() together with scope-based cleanup
via __free(snd_card_unref), and clear the card pointer after
successful registration to keep it alive. |
| Adobe Campaign Classic (ACC) is affected by an Improper Control of Generation of Code ('Code Injection') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by an Improper Control of Generation of Code ('Code Injection') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. A low-privileged attacker could exploit this vulnerability to gain elevated access to internal resources. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. A low-privileged attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by an Improper Control of Generation of Code ('Code Injection') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability that could result in arbitrary code execution in the context of the current user. A low-privileged attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read
In qla2x00_status_entry(), the FWI2 status path advances sense_data and
shrinks par_sense_len by rsp_info_len:
if (IS_FWI2_CAPABLE(ha)) {
sense_data += rsp_info_len;
par_sense_len -= rsp_info_len;
}
rsp_info_len is a 32-bit value taken directly from the target's FCP
response (sf.rsp_data_len), while par_sense_len is the IOCB data area
size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target
reporting an rsp_info_len larger than par_sense_len makes the unsigned
subtraction underflow to a huge value and advances sense_data out of
bounds.
The underflowed par_sense_len then defeats the cap in
qla2x00_handle_sense():
if (sense_len > par_sense_len)
sense_len = par_sense_len;
memcpy(cp->sense_buffer, sense_data, sense_len);
so the memcpy reads up to SCSI_SENSE_BUFFERSIZE bytes from the
out-of-bounds sense_data pointer, leaking adjacent response-ring/heap
memory into the command's sense buffer.
Clamp rsp_info_len to par_sense_len before the subtraction so
par_sense_len can never underflow and sense_data stays within the IOCB
data area. The fix sits before the comp_status switch, covering both
qla2x00_handle_sense() call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9481/2: breakpoint: CFI breakpoints only on demand
This removes the stub hw_breakpoint_cfi_handler() from ARM, making
it not steal breakpoint type 0x03 (ARM_ENTRY_CFI_BREAKPOINT) unless
CFI is actively used in the kernel.
When not instrumenting with CFI, or when a breakpoint is issued in
userspace, we fall through to return 1 from hw_breakpoint_pending()
"unhandled fault" so userspace can make use of this breakpoint.
Tested with LKDTM and this command line:
echo CFI_FORWARD_PROTO > /sys/kernel/debug/provoke-crash/DIRECT
still works as expected. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, s390: Clear fetch destination on faulting arena atomic
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes
at the landing pad with whatever that register held before the atomic
instead of the 0 that every other BPF_PROBE_* access delivers.
Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64,
s390x does not report arena violations from its exception handler, so there
is no access direction to correct here, only the missing register clear. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized
tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to
the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds
the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ
error (e.g. one inherited across a kexec) firing in this window would make
tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to
__arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers.
Drop the store from tegra241_vintf_init_lvcmdq() and publish the vcmdq at
the end of the allocation instead, with an smp_store_release() that pairs
with an smp_load_acquire() in the ISR, which can see a fully built LVCMDQ
or NULL.
The user-owned LVCMDQ allocation moves accordingly, publishing the vcmdq
once tegra241_vcmdq_hw_init_user() succeeds, using a plain store since a
user VINTF's lvcmdqs[] has no lockless reader -- the error ISR only walks
the VINTF0 array. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Guard admin state-revocation walks with NFSD_NET_UP
Writing to /proc/fs/nfsd/unlock_filesystem, or sending the
NFSD_CMD_UNLOCK_FILESYSTEM or NFSD_CMD_UNLOCK_EXPORT netlink command,
walks the NFSv4 client hash tables to revoke open state and cancel
async COPY operations. All three handlers gate that walk on
nn->nfsd_serv, but a listener added via portlist or netlink
listener_set sets nn->nfsd_serv before any nfsd thread starts.
nfsd_startup_net() has not yet allocated nn->conf_id_hashtbl, so the
walkers dereference a NULL table. A local administrator with
CAP_SYS_ADMIN can crash the kernel this way without ever starting the
server.
nn->nfsd_serv is set when the service is created, which precedes
table allocation. NFSD_NET_UP instead brackets the window where the
tables are live: set at the end of nfsd_startup_net() and cleared in
nfsd_shutdown_net() after they are freed, both under nfsd_mutex.
Gating the three unlock paths on NFSD_NET_UP fixes the startup-time
NULL dereference while preserving the earlier post-shutdown
use-after-free fix. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.
rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read
cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from
the RCRB MMIO block using a readl() loop bounded by sizeof(struct
aer_capability_regs). This struct is a software layout and its embedded
struct pcie_tlp_log is larger than the on-wire AER capability. As a
result the loop reads past the mapped AER register block.
The over-read also populates the software-only tail fields including
header_log.header_len. An out-of-range header_len passed to
pcie_print_tlp_log() can then loop past the header log buffer and cause
a second out-of-bounds read.
The read was correct when introduced, but struct pcie_tlp_log has since
grown (Header Log and TLP Prefix Log sizes, header_len and flit fields),
so sizeof(struct aer_capability_regs) no longer matches the physical AER
capability.
Bound the read to the physical AER registers, header through the 16 byte
Header Log. Zero the destination first so the software-only fields are
deterministic. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate sockaddr length per family in listener_set
nfsd_sock_nl_policy declares NFSD_A_SOCK_ADDR as a bare NLA_BINARY
attribute with no minimum length. A CAP_NET_ADMIN caller can send a
16-byte NFSD_A_SOCK_ADDR with sa_family=AF_INET6, causing a 12-byte
OOB read across three consumers (rpc_cmp_addr_port, svc_find_listener,
kernel_bind).
nfsd_nl_listener_set_doit() also parsed and validated each listener
entry inline in two separate loops, interleaved with mutating the
running listener configuration. The validation was duplicated, used an
open-coded "nla_len < sizeof(struct sockaddr)" check that was too short
for AF_INET6, and handled a malformed entry inconsistently depending on
which loop noticed it.
Add an nfsd_nl_validate_listeners() helper that walks the entire list
once and confirms each entry parses, carries both an address and a
transport name, and is long enough for its address family
(sizeof(struct sockaddr_in) for AF_INET, sizeof(struct sockaddr_in6)
for AF_INET6, -EAFNOSUPPORT otherwise). Call it before taking
nfsd_mutex or creating the serv, so a malformed request fails cleanly
with no side effects.
Since every entry is known valid by the time the two existing loops
run, drop the redundant presence and per-family length checks from
both, leaving only the nla_parse_nested() call needed to extract the
data. |
