| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
rtl2832_sdr_start_streaming() had multiple error paths that hit this
trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six
`goto err` paths covering subdev s_power, tuner setup, ADC setup,
stream-buffer allocation, urb allocation, and urb submission failures.
None of them returned the queued buffers.
The original function had no distinct success exit and fell straight
through into the err label, which previously only did mutex_unlock and
"return ret". Adding queued-buffer cleanup at err must therefore be
paired with an explicit success return; otherwise every successful
start would also drain the buffer queue and kill streaming. Add that
success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err
label and before each early return.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
The err label still does not roll back power_ctrl(), frontend_ctrl(),
the POWER_ON flag, or stream/URB allocations that may have happened
before the failing step. Those are pre-existing leaks of a different
class and are not addressed here. |
| In the Linux kernel, the following vulnerability has been resolved:
media: saa7134: Fix a possible memory leak in saa7134_video_init1
In saa7134_video_init1(), the return value of the first
saa7134_pgtable_alloc() is not checked. If it fails, the function
continues as if successful, leaving the driver with an invalid page
table. Additionally, if vb2_queue_init() for the VBI queue fails after
the video queue page table has been allocated, the allocated memory is
not freed before returning. The second saa7134_pgtable_alloc() also
lacks a return value check. Errors occur during device probing before
the device is fully registered, the normal cleanup path in
saa7134_finidev() is not executed, leading to memory leaks and
potential use of uninitialized DMA resources.
Check the return value of both saa7134_pgtable_alloc() calls and
propagate errors. On failure of any later step, free allocated page
tables to avoid memory leaks. Ensure control handlers are also
released on error to prevent further resource leakage.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32: dcmi: unregister notifier on probe failure
dcmi_graph_init() registers the async notifier before dcmi_probe() toggles
the reset line. If reset_control_assert() or reset_control_deassert()
fails afterwards, probe returns through err_cleanup and the driver core
will not call dcmi_remove().
Unregister the notifier before cleaning it up on that error path,
matching the successful remove path and the V4L2 async notifier lifetime
rules.
[hverkuil: added Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
media: sun4i-csi: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
sun4i_csi_start_streaming() returned -EINVAL when no matching CSI
format could be found, before any setup (scratch buffer allocation,
pipeline start) had been performed. The remaining error paths already
converge on the err_clear_dma_queue label, which calls
return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump
to that label directly: the intermediate err_disable_device /
err_disable_pipeline / err_free_scratch_buffer labels are skipped,
which is correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| IBM Cloud Pak System 2.3.5.0 could allow a local attacker to obtain sensitive information due to the insertion of credentials into log files. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: unwind v4l2 device registration on probe error
If the vpe_top resource is missing, vpe_probe() returns -ENODEV after
v4l2_device_register() has succeeded. Probe failures do not call the
driver's remove callback, so the v4l2 device remains registered on that
error path.
Route that failure through the existing v4l2_device_unregister() unwind
label, matching the other errors after v4l2_device_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix OOB access from firmware ADDBA window size
aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied
win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not
return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to
compute a kzalloc size and stored in rxtid->hold_q_sz, leading to
zero-size or overflowed allocations and subsequent out-of-bounds access.
Clean up any previously active aggregation session for the TID first,
then return early when win_sz is out of the valid range, instead of
proceeding with a broken allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error
path. Switch pmem allocation from devm_kzalloc() to kzalloc() with
explicit kfree() in the free path to match its list-managed lifetime.
Remove the erroneous list_del(&svc_data_mem) which corrupted the list head
on failed lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was added May 12th 2008. At that time, resources
created in pipe_open() could not be freed because there was not
pipe_close function pointer of the tracer. The pipe_close function pointer
was added in December 7th, 2009, but the mmiotrace tracer was not updated.
mmio_pipe_open() allocates a header_iter and takes a pci_dev reference
when trace_pipe is opened. mmio_close() frees them, but it was only
wired to the tracer's .close callback.
tracing_release_pipe() invokes .pipe_close, not .close, when the
trace_pipe file is released. As a result, closing trace_pipe with the
mmiotrace tracer active leaked the header_iter allocation and left a
stale pci_dev reference.
Set .pipe_close to mmio_close, matching how function_graph wires both
callbacks to the same handler.
Note, if the trace_pipe is read to completion, it will clean up the
resources, but if one were to run:
# head -n 1 /sys/kernel/tracing/trace_pipe
VERSION 20070824
Over and over again, it would trigger a massive leak. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: only honour the first PT_INTERP
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver"). |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: Add missing superblock check in find_or_insert_direct_key()
The legacy 'fscrypt_direct_keys' table caches master keys that are used
by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY.
It's just a global table for all filesystems (since the keys can be
provided by the legacy process-subscribed keyrings mechanism, which
makes it difficult to reuse super_block::s_master_keys).
The entries in it ('struct fscrypt_direct_key') do contain a super_block
pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when
the last inode that references the key is evicted.
However, when finding the fscrypt_direct_key for an inode, we weren't
actually comparing the super_block pointer. As a result, inodes with
different super_blocks could point to the same fscrypt_direct_key. That
could extend the lifetime of a fscrypt_direct_key beyond the
super_block it points to, causing a use-after-free later.
Fix this by creating distinct fscrypt_direct_key structs for distinct
super_block structs.
Note that this problem doesn't exist in the v2 policy equivalent
("per-mode keys"), since the data structures there are per super_block. |
| Windows 10 Update Assistant Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
net: slip: serialize receive against buffer reallocation
sl_realloc_bufs() replaces rbuff and updates buffsize while holding
sl->lock. slip_receive_buf() reads those fields and writes through rbuff
without holding the lock.
An MTU change can therefore race with receive processing. An MTU shrink
can expose the new smaller rbuff with the old larger bound, causing an
out-of-bounds write. A receive callback which already loaded the old
rbuff can instead continue writing after that buffer has been freed.
Serialize receive processing with sl_realloc_bufs() by holding sl->lock
while consuming each receive batch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hip04: fix RX buffer leak on build_skb failure
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: serial: handle zero-length frames to prevent rx buffer overflow
The MCTP serial receive state machine reads a frame length byte in
mctp_serial_push_header() case 2 and validates it upper-bound-only:
if (c > MCTP_SERIAL_FRAME_MTU) {
dev->rxstate = STATE_ERR;
} else {
dev->rxlen = c;
dev->rxpos = 0;
dev->rxstate = STATE_DATA;
...
}
A length of zero passes this check, so rxlen is set to 0 and the state
machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the
incoming byte is stored and rxpos incremented before the terminator is
dev->rxbuf[dev->rxpos] = c;
dev->rxpos++;
dev->rxstate = STATE_DATA;
if (dev->rxpos == dev->rxlen) {
dev->rxpos = 0;
dev->rxstate = STATE_TRAILER;
}
With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is
already 1 on the first data byte), so subsequent bytes are written past
the end of the fixed 74-byte rxbuf, which is the last member of the
netdev private area. Every following data byte is an attacker-controlled
1-byte out-of-bounds heap write, and the overflow continues until a
frame (0x7e) or escape byte resets the parser -- effectively unbounded.
Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line
discipline and bring the resulting mctpserialN netdev up, after which
the bytes arrive via the tty receive path.
Route a zero-length frame straight to STATE_TRAILER instead of
STATE_DATA. The trailer/framing bytes are still consumed, and the frame
resolves to a zero-length skb that the MCTP core rejects; the parser
never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can
no longer occur.
KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this
change):
UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370
index 74 is out of range for type 'u8 [74]'
BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf
Write of size 1 at addr ... by task kworker/u16:0
mctp_serial_tty_receive_buf
tty_ldisc_receive_buf
flush_to_ldisc
Allocated by task 152:
alloc_netdev_mqs
mctp_serial_open
v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so
the trailer/framing bytes are still consumed (Jeremy Kerr).
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix GSO userspace truncation underflow
OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb
length in OVS_CB(skb)->cutlen. When a later userspace action segments a
GSO skb, queue_gso_packets() reuses that delta for each smaller segment.
A segment can then reach queue_userspace_packet() with cutlen greater
than skb->len, underflowing the length passed to skb_zerocopy().
Store the maximum preserved length instead and bound each consumer
against the current skb length. Use U32_MAX as the no-truncation
sentinel so the value remains valid if skb geometry changes before a
consumer handles it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: fix integer overflow in image size
Fix a security vulnerability where malicious VCE command streams
with oversized dimensions (e.g. 65536×65536) cause 32-bit integer
overflow, wrapping the calculated buffer size to 0. This bypasses
validation and allows GPU firmware to perform out-of-bound memory
access.
The fix uses 64-bit arithmetic to detect overflow and rejects
invalid dimensions before they reach the hardware.
V2: remove redundant check
V3: modify max height value
V4: remove size64
(cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum server registration per node
Current code does no bound checking on the number of servers added per
node. A malicious client can flood NEW_SERVER messages and exhaust memory.
Fix this issue by limiting the maximum number of server registrations to
256 per node. If the NEW_SERVER message is received for an old port, then
don't restrict it as it will get replaced. While at it, also rate limit
the error messages in the failure path of qrtr_ns_worker().
Note that the limit of 256 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775) Fix access to temperature configuration registers
The number of temperature configuration registers does
not always match the total number of temperature registers.
This can result in access errors reported if KASAN is enabled.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core |
| A Cross-Site Scripting (XSS) and Cross-Site Request Forgery (CSRF) vulnerability exists when Power BI Report Server Template file (pbix) containing HTML files is uploaded to the server and HTML files are accessed directly by the victim.
Combining these 2 vulnerabilities together, an attacker is able to upload malicious Power BI templates files to the server using the victim's session and run scripts in the security context of the user and perform privilege escalation in case the victim has admin privileges when the victim access one of the HTML files present in the malicious Power BI template uploaded.
The security update addresses the vulnerability by helping to ensure that Power BI Report Server properly sanitize file uploads. |
