| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix resource leak in probe error path
When pcim_iomap_region() or devm_kmemdup() fail, the code returns
directly without cleaning up previously allocated resources:
- mt76_device allocated by mt76_alloc_device()
- pci irq vectors allocated by pci_alloc_irq_vectors()
Fix this by jumping to the existing error cleanup path instead of
returning directly. |
| In the Linux kernel, the following vulnerability has been resolved:
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Clear variable event pointer on read
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: rebase copied fsdlm LVB pointers in locking_state
The locking_state debugfs iterator snapshots struct ocfs2_lock_res by
value under ocfs2_dlm_tracking_lock and later formats that copy in
ocfs2_dlm_seq_show(). That is fine for the inline fields, but the
userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once
the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still
points into the original lockres owner, so teardown can free that
container before the debugfs dump walks the raw LVB bytes.
Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw
LVB. The seq snapshot already carries the inline LVB storage reserved in
struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes
without borrowing the original lockres lifetime.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state reader: lockres teardown:
1. ocfs2_dlm_seq_start()/next() 1. file release or another owner
copies struct ocfs2_lock_res teardown reaches
2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free()
the copied row 2. the lockres is removed from the
3. ocfs2_dlm_lvb() follows the tracking list
copied sb_lvbptr 3. the owner frees the original
lockres container
Validation reproduced this kernel report:
KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430
RIP: 0033:0x7f8ec4b1e29d
The buggy address belongs to the object at ffff88810a1e0800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 368 bytes inside of freed 1024-byte region
[ffff88810a1e0800, ffff88810a1e0c00)
Read of size 1
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
seq_read_iter+0x29d/0x790
seq_read+0x20a/0x280
find_held_lock+0x2b/0x80
rcu_read_unlock+0x18/0x70
full_proxy_read+0x9e/0xd0
vfs_read+0x12c/0x590
ksys_read+0xd2/0x170
do_user_addr_fault+0x65a/0x890
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
ocfs2_file_open+0x13e/0x300
do_dentry_open+0x233/0x7f0
vfs_open+0x5a/0x1b0
path_openat+0x66d/0x1540
do_file_open+0x186/0x2b0
do_sys_openat2+0xce/0x150
__x64_sys_openat+0xd0/0x140
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
ocfs2_file_release+0x138/0x260
__fput+0x1df/0x4b0
fput_close_sync+0xd2/0x170
__x64_sys_close+0x55/0x90
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails
The global pointer 'reserved_mem' continues to reference the
reserved_mem_array which lives in __initdata if
alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is
exported for post-init use, that would dereference freed memory
and trigger a use-after-free.
So reset reserved_mem_count to 0 when alloc_reserved_mem_array()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Check PCM and DAI name strings before use
Topology objects store several PCM and DAI names in fixed-size UAPI
arrays. Other topology parser paths validate these fields with bounded
strnlen() checks before using them as C strings, but the PCM and DAI
paths still pass some fixed-size arrays directly to strlen(),
devm_kstrdup(), DAI lookup, and diagnostic prints.
A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream
capability name can therefore make the parser read past the end of the
fixed-size field.
Reject unterminated PCM and DAI name fields before consuming them as C
strings. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix kernel BUG in ext4_write_inline_data_end
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Initialize dpi variable to zero
dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied
for all the cases. So initialize the dpi to 0. |
| HTML::FormHandler versions through 0.40068 for Perl allow attacker selected method dispatch and resource exhaustion because _apply_actions and add_error use error message text built from request data as a Locale::Maketext bracket notation template.
add_error hands its first argument to the language handle as the Locale::Maketext message key, and the default handle's lexicon sets `_AUTO`, so a string that is not a lexicon entry is compiled as a bracket notation template instead of being looked up. In a bracket group the first token names a method called on the language handle and the remaining tokens are its arguments.
Three kinds of text the library did not author reach that position. _apply_actions installs a `$SIG{__WARN__}` handler that stores the warning text in `$error_message`, and a captured warning survives a successful action, so a field carrying a numeric transform turns `Argument "[sprintf,%50000000d,0]" isn't numeric` into the template; a warning quotes the submitted value verbatim, so the group is well formed and dispatches. `$error_message ||= $tobj->validate($new_value)` takes a type constraint's own failure message, which renders the rejected value through a partial dumper in bracket and comma form (Devel::PartialDump when Moose can load it, Type::Tiny's own dumper always), so a field with `apply => [ Str ]` given a parameter sent more than once, which arrives as an array, gets `Reference ["a","b"] did not pass type constraint "Str"` as its template, from a request that carries no bracket character of its own. A coercion or transform exception reaches it the same way. Beyond those, a validator whose message contains the field value puts that value in the template directly, and add_error replaces the message list with the contents of an arrayref first argument (`@message = @{$message[0]} if ref $message[0] eq 'ARRAY'`), so a value arriving as an array fills the argument slots from the same request as well.
A malformed group such as `[0]` makes the compile croak, and HTML::FormHandler::I18N::maketext and add_error each re-raise that as a die, so process() throws. A well formed group naming sprintf reaches CORE::sprintf with an attacker chosen field width. Any caller that applies a type constraint or a transform to an untrusted field, or whose validator passes an untrusted field value to add_error, can be made to throw an unhandled exception out of process(), or to allocate an arbitrary amount of memory in one request, and an application whose language handle subclass defines side effecting public methods makes those callable with attacker chosen arguments. The dumped type constraint message is bounded to the exception, because both dumpers quote non-numeric elements so the method slot is never an attacker chosen name. The built-in messages pass fixed templates with the value in an argument slot, where it stays inert, and the built-in field types attach explicit message callbacks, so neither is affected. |
| A vulnerability was identified in D-Link DIR-842 2.01.B04. This impacts an unknown function of the file /etc/vsftpd.conf of the component vsftpd. Such manipulation leads to incorrect default permissions. It is possible to launch the attack remotely. A high complexity level is associated with this attack. The exploitability is said to be difficult. |
| A vulnerability was determined in TRENDnet TEW-WLC100 2.05b02. This affects an unknown function of the file /etc/racoon.conf of the component IKE Phase 1 Aggressive Mode. This manipulation of the argument exchange_mode causes missing encryption of sensitive data. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is reported as difficult. The vendor was contacted early about this disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource()
If devm_platform_get_and_ioremap_resource() returns an error,
mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to
get the error code. This results in a use-after-free.
Save the error code before freeing tmp_res. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject command submission on devices without a submit op
amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit()
unconditionally, but only aie2_dev_ops defines that callback.
aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user
AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer
call and oopses the kernel. AIE4 submits work through a mapped user queue
and doorbell, not this ioctl path.
Reject the submission early with -EOPNOTSUPP when the device provides no
cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: inno-hdmi: Switch to drmm_kzalloc()
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL deref in change_sta_links for unready link
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.
Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
Call trace:
ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
drv_sta_state+0x100/0xbd8 [mac80211]
__sta_info_destroy_part2+0x148/0x178 [mac80211]
ieee80211_set_disassoc+0x500/0x678 [mac80211]
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
Call trace:
ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
drv_set_key+0x70/0x100 [mac80211]
ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
ieee80211_add_key+0x16c/0x2ac [mac80211]
nl80211_new_key+0x138/0x280 [cfg80211]
Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Fix recursive lock in device_cache_fw_images()
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: Dont expose folded kernel pointers
The flow classifier falls back to addr_fold() for fields that are missing
from packet headers. In map mode, userspace controls mask, xor, rshift,
addend and divisor, and can observe the resulting classid through class
statistics. This allows a tc classifier in a user/network namespace to
recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct().
Align with standard kernel practices for pointer hashing and replace the
XOR folding with a keyed siphash (which is cryptographically secure) |
| The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to blind SQL Injection via '{username}' Placeholder in Dynamic-Choice Field WHERE Clause in all versions up to, and including, 1.15.44 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This requires that a form is configured with a DB-backed dynamic choice field whose WHERE template references the {username} placeholder, and the attacker must first set their own display_name to a SQL payload via the standard WordPress profile edit screen before triggering the fm_reload_input AJAX endpoint. |
| The KiviCare – Clinic & Patient Management System (EHR) plugin for WordPress is vulnerable to generic SQL Injection via the 'searchTerm' parameter in all versions up to, and including, 4.5.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with custom-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires a KiviCare custom role with the 'settings_view' permission (e.g., Doctor or Receptionist), meaning standard WordPress subscribers cannot exploit this without a KiviCare-assigned role. |
| JupyterLab (pip package 'jupyterlab') versions >=4.1.0,<=4.5.9 and >=4.6.0,<=4.6.1 contain a plugin manager lock-rule enforcement bypass. Two server-side enforcement gaps allow an authenticated user to circumvent administrator lock rules by making direct requests to the /lab/api/plugins endpoint, enabling or disabling plugins that were locked — including child plugins of multi-plugin extensions and plugins locked via the 'lock all' mechanism. This can impact data integrity and bypass hardening or restrictions (e.g., download/upload limits) implemented through locked plugins. Fixed in versions 4.6.2 and 4.5.10. |
