| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Fix recursive lock in device_cache_fw_images()
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: fix lockless traversals of ->s_children
Having the parent directory locked protects entries from removal
by another thread, but it does *not* protect cursors from being
moved around by lseek() - or freed, for that matter. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: unregister PM notifier on watchdog unregister
watchdog_register_device() registers wdd->pm_nb when
WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not
remove it. This leaves an embedded notifier block on the PM notifier chain
after the watchdog device has been unregistered.
A later suspend/resume notification can then call watchdog_pm_notifier()
with a stale watchdog_device pointer, or at minimum after wdd->wd_data has
been cleared by watchdog_dev_unregister().
Unregister the PM notifier before tearing down the watchdog device. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Destroy the pages content after detaching from dmabuf
Sashiko points out this has gotten out of order, the mutex could still be
in use through the dmabuf invalidation callbacks. Don't destroy any of the
pages content until the dmabuf is fully detached. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link
mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree()
after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents
future RCU readers from obtaining the pointer -- it does not wait for
existing readers that already hold it via rcu_dereference.
The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid
and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer
via rcu_dereference just before the NULL assignment, it will dereference
freed memory after the kfree.
struct mt76_vif_link already contains an rcu_head field that is unused at
this free site -- a developer oversight, since the adjacent
kfree_rcu_mightsleep call for rx_sc in the same function shows the
pattern was understood.
Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: validate skb length in testmode query
In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg()
is used in a memcpy without validating its length:
memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN);
where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response
shorter than 520 bytes (8 + 512), this reads beyond the skb data
buffer. The over-read data is then returned to userspace via nla_put()
in mt7925_testmode_dump().
Add a length check before the memcpy to ensure the skb contains
sufficient data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb()
If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine,
mt7996 driver leaks an already allocated tx token. Fix the issue
releasing the token in case of error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible NULL pointer dereference in mt7996_mac_write_txwi_80211()
For injected frames (e.g. via radiotap), mac80211 can pass
info->control.vif = NULL, as explicitly noted in struct ieee80211_tx_info.
Check vif pointer before executing ieee80211_vif_is_mld() in
mt7996_mac_write_txwi_80211 routine in order to avoid a possible NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs()
In the beginning of the loop, we try to obtain a locked delayed ref head,
if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(),
which can return an error pointer. If the error pointer is -EAGAIN we do
a continue and go back to the beginning of the loop, which will not try
again to call btrfs_select_ref_head() since 'locked_ref' is no longer
NULL but it's ERR_PTR(-EAGAIN), and then we do:
spin_lock(&locked_ref->lock);
against a ERR_PTR(-EAGAIN) value, generating an invalid pointer
dereference.
Fix this by ensuring that 'locked_ref' is set to NULL when
btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count'
as well, to prevent infinite looping. We do this by doing a goto to the
bottom of the loop that already sets 'locked_ref' to NULL and does a
cond_resched(), with an increment to 'count' right before the goto.
These measures were in place before the refactoring in commit 0110a4c43451
("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally
lost afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: sm501fb: Fix buffer errors in OF binding code
The code that gets the frame buffer mode from OF has 'use after free',
'buffer overrun' and memory leaks.
info->edid_data isn't free if the probe functions fail or if
pd->def_mode is set.
If both the CRT and PANEL are enabled info->edid_data is used after
being freed and is freed twice.
The string returned by of_get_property(np, "mode", &len) is just
written over either the static "640x480-16@60" or the module parameter
string without any regard for the length (which is most likely longer).
Use kstrump() for the OF mode and free everything before freeing 'info. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields on map value recycle
Map update and delete paths currently call bpf_obj_free_fields() when a
value is being replaced or recycled. That makes field destruction depend
on the context of the update/delete operation. For tracing programs this
can include NMI context, where referenced kptr destructors, uptr
unpinning, and graph root destruction are not generally safe.
Introduce bpf_obj_cancel_fields() for the reusable-value path. It only
performs NMI-safe cleanup for timer, workqueue, and task_work fields.
Fields that need full destruction are left attached to the recycled value
and are destroyed by the final cleanup path instead.
Switch array and hashtab update/delete/recycle paths to this cancel
helper. Keep bpf_obj_free_fields() for final map destruction and for
bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator
destructors, so teardown continues to walk the normal and extra elements
and fully destroy their fields.
This deliberately relaxes the eager-free semantics of map update/delete
for special fields. Programs that relied on a recycled map slot becoming
empty immediately after update/delete were relying on behavior that
cannot be implemented safely from every BPF execution context without
offloading arbitrary destructors.
There is a chance this change breaks programs making assumptions
regarding the eager freeing of fields. If so, we can relax semantics to
cancellation only when irqs_disabled() is true in the future. However,
theoretically, map values that get reused eagerly already have weaker
guarantees as parallel users can recreate freed fields before the new
element becomes visible again. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/net: complete zerocopy ubufs only once
vhost-net initializes one ubuf_info per outstanding zerocopy TX
descriptor and hands it to the backend socket. The networking stack may
then clone a zerocopy skb before all skb references are released. For
example, batman-adv fragmentation reaches skb_split(), which calls
skb_zerocopy_clone() and increments the same ubuf_info refcount.
vhost_zerocopy_complete() currently treats every ubuf callback as a
completed vhost descriptor. It dereferences ubuf->ctx, writes the
descriptor completion state, and drops the vhost_net_ubuf_ref even when
the callback only releases a cloned skb reference. A backend reset can
therefore wait for and free the vhost_net_ubuf_ref while another cloned
skb still carries the same ubuf_info. A later completion then
dereferences the freed ubufs pointer.
KASAN reports the stale completion as:
BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x1d7/0x1f0
BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x101/0x1f0
vhost_zerocopy_complete
skb_copy_ubufs
__dev_forward_skb2
veth_xmit
The freed object was allocated from vhost_net_ioctl() while setting the
backend and freed through kfree_rcu()/kvfree_rcu_bulk after backend
removal, while delayed skb completion still reached
vhost_zerocopy_complete().
Honor the generic ubuf_info refcount before touching vhost state, and run
the vhost descriptor completion only for the final ubuf reference. This
matches the msg_zerocopy_complete() ownership rule for cloned zerocopy
skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT
Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not
belong to the same superblock as the original file. Currently, this
validation is performed inside ext4_move_extents() by
mext_check_validity(), but only after lock_two_nondirectories() has
already acquired the inode locks. When the donor fd refers to a file
on a different filesystem (e.g., overlayfs), this late validation
creates a circular lock dependency:
CPU0 (overlayfs write) CPU1 (ext4 ioctl)
---- ----
inode_lock(ovl_inode)
mnt_want_write_file(filp)
sb_start_write(ext4_sb) [sb_writers]
backing_file_write_iter()
vfs_iter_write(real_file)
file_start_write(real_file)
sb_start_write(ext4_sb) [blocked by freeze]
lock_two_nondirectories()
inode_lock(ovl_inode) [blocked]
With a concurrent freeze operation holding sb_writers write side, this
forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits
for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock.
Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files,
it fundamentally requires both files to reside on the same ext4
filesystem. Moving the superblock check before any lock acquisition
is both semantically correct and eliminates the circular dependency
by ensuring that cross-filesystem donor fds are rejected before
sb_writers or inode locks are taken. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Tighten cgroup storage cookie checks for prog arrays
The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local
storage") is still incomplete. The prog-array compatibility check
treats a program with no cgroup storage as compatible with any stored
storage cookie. This allows a storage-less program to bridge a tail
call chain between an entry program and a storage-using callee even
though cgroup local storage at runtime still follows the caller's
context, that is, A -> B(no storage) -> C(storage) path.
Requiring exact cookie equality would break the legitimate case of a
storage-less leaf program being tail called from a storage-using one.
Instead, only accept a zero storage cookie if the program cannot
perform tail calls itself. This keeps A -> B(no storage) working
while rejecting the A -> B(no storage) -> C(storage) bridge. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_dmp_hdr() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_dmp_hdr() unconditionally dereferences hu->serdev->dev.driver->name,
causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check and falling back to
"hci_ldisc_qca" for the non-serdev case. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path
When btmtk_isopkt_pad() fails, the previously allocated URB is not freed,
leaking the urb structure. Add usb_free_urb() before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: validate codec capability element length
Read Local Codec Capabilities returns a sequence of capability elements.
Each element starts with a one-byte length followed by that many payload
bytes.
hci_read_codec_capabilities() checks that the skb contains the length
byte, but then validates only caps->len against the remaining skb
length. A malformed controller response with one remaining byte and
caps->len set to one passes that check even though the element needs two
bytes. The parser then records a two-byte capability and copies one
byte beyond the advertised response payload into the codec list.
Validate the full element size, including the length byte, before adding
it to the accumulated capability length. This preserves all well-formed
capability elements and drops only truncated controller responses. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR aging push to queue error flow
Aging pools with pinned handles requires moving handles from the
active queue to a non-empty inactive queue that might fail on new page
allocation, we are currently not handling the fault and leaking any mkey
that fails the push.
Fix by Introducing push_queue_to_queue_locked() that fills the
destination's partial tail page from the source and then splices the
remaining source pages onto the destination, performing no allocation.
Replace the per-handle move loop in age_pinned_pool() and the
open-coded splice in pool_aging_work() with calls to the helper.
As the helper cannot fail under memory pressure, removing a class of
GFP_ATOMIC allocations under the pool lock and simplifying the error
flow. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR set pinned push error path
Add destruction of FRMR handles in case the push to the pool fails.
This prevents resources leak in case pool page allocation fails. |
