| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FastNetMon Community Edition through 1.2.9 contains an out-of-bounds read in the NetFlow v9 options template parser. In process_netflow_v9_options_template() (src/netflow_plugin/netflow_v9_collector.cpp), the scope parsing loop (lines 224-229) iterates until scopes_offset reaches the attacker-controlled option_scope_length value, reading netflow9_template_flowset_record_t structures at each step. No bounds check validates that (zone_address + scopes_offset + sizeof(record)) stays within the flowset. The same issue affects the options field loop (lines 241-257) with option_length. Furthermore, option_scope_length is not validated to be a multiple of sizeof(netflow9_template_flowset_record_t), potentially causing misaligned reads. An attacker can trigger reads past the end of the UDP packet buffer. |
| SimpleSAMLphp-casserver is a CAS 1.0 and 2.0 compliant CAS server in the form of a SimpleSAMLphp module. In versions below 6.3.1 and 7.0.0, the logout endpoint accepts a url query parameter to redirect to. casserver treats that url as trusted, and either (depending on configuration) redirects the browser there, or shows a "you've been logged out" page with a link to continue to that url. Impacted configs include 'enable_logout' => true, and 'skip_logout_page' -> true. This issue has been resolved in versions 6.3.1 and 7.0.0. |
| FastNetMon Community Edition through 1.2.9 has out-of-bounds memory access because it incorrectly parses BGP path attributes with the extended length flag set. In src/bgp_protocol.hpp, the parse_raw_bgp_attribute() function correctly identifies when extended_length_bit is set and sets length_of_length_field to 2, but then reads only a single byte for the attribute value length (attribute_value_length = value[2] at line 173). Per RFC 4271 Section 4.3, when the Extended Length bit is set, the Attribute Length field is two octets and the value should be read as a 16-bit big-endian integer from value[2] and value[3]. As a result, any attribute longer than 255 bytes has its length silently truncated to the low byte (e.g., 300 bytes = 0x012C is read as 0x2C = 44 bytes). The remaining 256 bytes are then misinterpreted as subsequent attributes, causing cascading parse failures and potential out-of-bounds memory access. |
| FastNetMon Community Edition through 1.2.9 contains a stack-based buffer overflow in the BGP NLRI (Network Layer Reachability Information) decoder. The function decode_bgp_subnet_encoding_ipv4_raw() in src/bgp_protocol.cpp reads prefix_bit_length directly from the BGP packet (line 99) without validating it is <= 32 for IPv4 prefixes. This value is passed to how_much_bytes_we_need_for_storing_certain_subnet_mask() which computes ceil(prefix_bit_length / 8), returning up to 32 bytes for a prefix_bit_length of 255. The result is used as the length argument to memcpy() (line 106), which copies into a 4-byte uint32_t stack variable (prefix_ipv4). This causes a stack buffer overflow of up to 28 bytes, which can be exploited for arbitrary code execution. Additionally, the unvalidated prefix_bit_length is passed to convert_cidr_to_binary_netmask_local_function_copy() (line 111), where a shift of (32 - cidr) with cidr > 32 causes undefined behavior. |
| Agent Zero before version 1.15 contains a path traversal vulnerability that allows unauthenticated attackers to read arbitrary files by supplying crafted paths to the image file serving endpoint, which relies solely on an extension allowlist while the path containment check is explicitly disabled. Attackers can request any file with an image extension readable by the process, including files outside the agent workspace, user home directories, and mounted volumes, and can also leverage symlink-based escapes due to the lack of path canonicalization in the path resolution logic. |
| Snipe-IT is an IT asset/license management system. Prior to 8.4.1, an open redirect vulnerability in Snipe-IT allows attackers to redirect users to malicious sites via unvalidated HTTP Referer header stored in session variable. This vulnerability is fixed in 8.4.1. |
| Prometheus is an open-source monitoring system and time series database. From 2.49.0 to before 3.5.3 and 3.11.3, in the Prometheus server's legacy web UI (enabled via the command-line flag --enable-feature=old-ui), the histogram heatmap chart view does not escape le label values when inserting them into the HTML for use as axis tick mark labels. An attacker who can inject crafted metrics can execute JavaScript in the browser of any Prometheus user who views the metric in the heatmap chart UI. This vulnerability is fixed in 3.5.3 and 3.11.3. |
| In GDAL 3.1.0 through 3.13.0, scanForGeometryContainers in the netCDF driver allows code execution via a stack-based buffer overflow. It reads a geometry attribute into a fixed-size stack buffer without validating the attribute length. The attacker embeds the exploit as an oversized geometry attribute in a crafted NetCDF file. This achieves arbitrary code execution on the server running GDAL. This is in frmts/netcdf/netcdfsg.cpp. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, the Image directive plugin validates the :width: and :height: options with a regex compiled as _num_re = re.compile(r"^\d+(?:\.\d*)?"). When the validated value is not a plain integer, render_block_image() inserts it directly into a style="width:...;" or style="height:...;" attribute. Because the value was accepted by the prefix-only regex, any CSS after the leading digits reaches the style= attribute verbatim and without escaping. This vulnerability is fixed in 3.2.1. |
| GitLab MCP Server lets an AI agent talk directly to GitLab. Prior to 0.6.0, the HTTP transport in src/transport.ts ships with no authentication layer at all and a wildcard Access-Control-Allow-Origin: * on every response. The structural defect is that the SSE server stands up a stateful, mutation-capable RPC endpoint that is backed by the operator's GITLAB_PERSONAL_ACCESS_TOKEN without any inbound credential check, then advertises itself to every cross-origin browser context via the wildcard CORS header. The httpServer.listen(port) call at line 97 also passes no host argument, so the bind defaults to 0.0.0.0 and exposes the auth-less surface on every interface. This vulnerability is fixed in 0.6.0. |
| eml_parser serves as a python module for parsing eml files and returning various information found in the e-mail as well as computed information. Prior to 3.0.1, EmlParser.get_raw_body_text() recurses unconditionally for every nested message/rfc822 attachment without any depth limit. An attacker who can supply a badly crafted EML file with approximately 120 nested message/rfc822 parts triggers an unhandled RecursionError and aborts parsing of the message. A 12 KB EML file is enough to crash a worker. Though this causes the parser to crash, it is an unlikely scenario as the suggested EML that crashes the parser would not pass basic RFC compliance tests. This vulnerability is fixed in 3.0.1. |
| view_component is a framework for building reusable, testable, and encapsulated view components in Ruby on Rails. From 3.0.0 to 4.9.0, the preview route derives an example name from the URL and calls it with public_send. The code does not verify that the requested method is one of the preview examples explicitly defined by the preview class. As a result, inherited public methods on ViewComponent::Preview are route-reachable. The most important one is render_with_template, which accepts template: and locals:. Those values can come from request params and are later passed to Rails as render template:. If previews are exposed, an attacker can render internal Rails templates that are not otherwise routable. This vulnerability is fixed in 4.9.0. |
| Lumiverse is a full-featured AI chat application. Prior to 0.9.7, when the primary toSmbPath(fullPath) call throws, the method falls back to a dirname/basename split and only validates the directory prefix. The basename is concatenated directly into the smbclient -c script without validation. smbclient interprets ; as a subcommand separator and !cmd as a local-shell escape that runs cmd on the host. A path whose directory component is clean but whose basename contains "; !<cmd>; echo " achieves arbitrary command execution on the Lumiverse server. This vulnerability is fixed in 0.9.7. |
| eventsource-encoder encodes events as well-formed EventSource/Server Sent Event (SSE) messages. Prior to 1.0.2, eventsource-encoder does not sanitize the event or id fields of an EventSourceMessage before serializing them. An attacker who controls either field can inject arbitrary Server-Sent Events line terminators (\n, \r, or \r\n) and thereby forge additional SSE fields or entire messages on the stream. This vulnerability is fixed in 1.0.2. |
| The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege escalation in programs using the idna package. For example, a program which performs privilege checks on the ASCII hostname may reject "example.com" but permit "xn--example-.com". If that program subsequently converts the ASCII hostname to Unicode, it will inadvertently permits access to the Unicode name "example.com". |
| When rendering certain unicode sequences, grub2's font code doesn't proper validate if the informed glyph's width and height is constrained within bitmap size. As consequence an attacker can craft an input which will lead to a out-of-bounds write into grub2's heap, leading to memory corruption and availability issues. Although complex, arbitrary code execution could not be discarded. |
| .NET Core and Visual Studio Denial of Service Vulnerability |
| .NET and Visual Studio Denial of Service Vulnerability |
| .NET and Visual Studio Denial of Service Vulnerability |
| An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. |
