| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node()
Previously, btrfs_get_or_create_delayed_node() set the delayed_node's
refcount before acquiring the root->delayed_nodes lock.
Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes")
moved refcount_set inside the critical section, which means there is
no longer a memory barrier between setting the refcount and setting
btrfs_inode->delayed_node.
Without that barrier, the stores to node->refs and
btrfs_inode->delayed_node may become visible out of order. Another
thread can then read btrfs_inode->delayed_node and attempt to
increment a refcount that hasn't been set yet, leading to a
refcounting bug and a use-after-free warning.
The fix is to move refcount_set back to where it was to take
advantage of the implicit memory barrier provided by lock
acquisition.
Because the allocations now happen outside of the lock's critical
section, they can use GFP_NOFS instead of GFP_ATOMIC. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: ensure worker is torn down
When an IRQ worker is running, unplugging the device would cause a
crash. The sealevel hardware this driver was written for was not
hotpluggable, so I never realized it.
This change uses a spinlock to protect a list of workers, which
it tears down on disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: always drop device refcount in ib_del_sub_device_and_put()
Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add
support to add/delete a sub IB device through netlink") grabs a reference
using ib_device_get_by_index() before calling ib_del_sub_device_and_put(),
we need to drop that reference before returning -EOPNOTSUPP error. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix gmap_helper_zap_one_page() again
A few checks were missing in gmap_helper_zap_one_page(), which can lead
to memory corruption in the guest under specific circumstances.
Add the missing checks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix memory leak on usb_submit_urb() failure
In async_set_registers(), when usb_submit_urb() fails, the allocated
async_req structure and URB are not freed, causing a memory leak.
The completion callback async_set_reg_cb() is responsible for freeing
these allocations, but it is only called after the URB is successfully
submitted and completes (successfully or with error). If submission
fails, the callback never runs and the memory is leaked.
Fix this by freeing both the URB and the request structure in the error
path when usb_submit_urb() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix memory leak in get_file_all_info()
In get_file_all_info(), if vfs_getattr() fails, the function returns
immediately without freeing the allocated filename, leading to a memory
leak.
Fix this by freeing the filename before returning in this error case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: properly keep track of conduit reference
Problem description
-------------------
DSA has a mumbo-jumbo of reference handling of the conduit net device
and its kobject which, sadly, is just wrong and doesn't make sense.
There are two distinct problems.
1. The OF path, which uses of_find_net_device_by_node(), never releases
the elevated refcount on the conduit's kobject. Nominally, the OF and
non-OF paths should result in objects having identical reference
counts taken, and it is already suspicious that
dsa_dev_to_net_device() has a put_device() call which is missing in
dsa_port_parse_of(), but we can actually even verify that an issue
exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command
"before" and "after" applying this patch:
(unbind the conduit driver for net device eno2)
echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
we see these lines in the output diff which appear only with the patch
applied:
kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000)
kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000)
2. After we find the conduit interface one way (OF) or another (non-OF),
it can get unregistered at any time, and DSA remains with a long-lived,
but in this case stale, cpu_dp->conduit pointer. Holding the net
device's underlying kobject isn't actually of much help, it just
prevents it from being freed (but we never need that kobject
directly). What helps us to prevent the net device from being
unregistered is the parallel netdev reference mechanism (dev_hold()
and dev_put()).
Actually we actually use that netdev tracker mechanism implicitly on
user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with
the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link().
But time still passes at DSA switch probe time between the initial
of_find_net_device_by_node() code and the user port creation time, time
during which the conduit could unregister itself and DSA wouldn't know
about it.
So we have to run of_find_net_device_by_node() under rtnl_lock() to
prevent that from happening, and release the lock only with the netdev
tracker having acquired the reference.
Do we need to keep the reference until dsa_unregister_switch() /
dsa_switch_shutdown()?
1: Maybe yes. A switch device will still be registered even if all user
ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not
make user port errors fatal"), and the cpu_dp->conduit pointers
remain valid. I haven't audited all call paths to see whether they
will actually use the conduit in lack of any user port, but if they
do, it seems safer to not rely on user ports for that reference.
2. Definitely yes. We support changing the conduit which a user port is
associated to, and we can get into a situation where we've moved all
user ports away from a conduit, thus no longer hold any reference to
it via the net device tracker. But we shouldn't let it go nonetheless
- see the next change in relation to dsa_tree_find_first_conduit()
and LAG conduits which disappear.
We have to be prepared to return to the physical conduit, so the CPU
port must explicitly keep another reference to it. This is also to
say: the user ports and their CPU ports may not always keep a
reference to the same conduit net device, and both are needed.
As for the conduit's kobject for the /sys/class/net/ entry, we don't
care about it, we can release it as soon as we hold the net device
object itself.
History and blame attribution
-----------------------------
The code has been refactored so many times, it is very difficult to
follow and properly attribute a blame, but I'll try to make a short
history which I hope to be correct.
We have two distinct probing paths:
- one for OF, introduced in 2016 i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory and information leak in smb3_reconfigure()
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix refcount leak when invalid session is found on session lookup
When a session is found but its state is not SMB2_SESSION_VALID, It
indicates that no valid session was found, but it is missing to decrement
the reference count acquired by the session lookup, which results in
a reference count leak. This patch fixes the issue by explicitly calling
ksmbd_user_session_put to release the reference to the session. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: correctly handle io_poll_add() return value on update
When the core of io_uring was updated to handle completions
consistently and with fixed return codes, the POLL_REMOVE opcode
with updates got slightly broken. If a POLL_ADD is pending and
then POLL_REMOVE is used to update the events of that request, if that
update causes the POLL_ADD to now trigger, then that completion is lost
and a CQE is never posted.
Additionally, ensure that if an update does cause an existing POLL_ADD
to complete, that the completion value isn't always overwritten with
-ECANCELED. For that case, whatever io_poll_add() set the value to
should just be retained. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: restore destructor on submit failure
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix a memory leak in tpm2_load_cmd
'tpm2_load_cmd' allocates a tempoary blob indirectly via 'tpm2_key_decode'
but it is not freed in the failure paths. Address this by wrapping the blob
into with a cleanup helper. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix leaked ct in error paths
There are some situations where ct might be leaked as error paths are
skipping the refcounted check and return immediately. In order to solve
it make sure that the check is always called. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: ensure context reset on disconnect()
After the blamed commit below, if the MPC subflow is already in TCP_CLOSE
status or has fallback to TCP at mptcp_disconnect() time,
mptcp_do_fastclose() skips setting the `send_fastclose flag` and the later
__mptcp_close_ssk() does not reset anymore the related subflow context.
Any later connection will be created with both the `request_mptcp` flag
and the msk-level fallback status off (it is unconditionally cleared at
MPTCP disconnect time), leading to a warning in subflow_data_ready():
WARNING: CPU: 26 PID: 8996 at net/mptcp/subflow.c:1519 subflow_data_ready (net/mptcp/subflow.c:1519 (discriminator 13))
Modules linked in:
CPU: 26 UID: 0 PID: 8996 Comm: syz.22.39 Not tainted 6.18.0-rc7-05427-g11fc074f6c36 #1 PREEMPT(voluntary)
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:subflow_data_ready (net/mptcp/subflow.c:1519 (discriminator 13))
Code: 90 0f 0b 90 90 e9 04 fe ff ff e8 b7 1e f5 fe 89 ee bf 07 00 00 00 e8 db 19 f5 fe 83 fd 07 0f 84 35 ff ff ff e8 9d 1e f5 fe 90 <0f> 0b 90 e9 27 ff ff ff e8 8f 1e f5 fe 4c 89 e7 48 89 de e8 14 09
RSP: 0018:ffffc9002646fb30 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88813b218000 RCX: ffffffff825c8435
RDX: ffff8881300b3580 RSI: ffffffff825c8443 RDI: 0000000000000005
RBP: 000000000000000b R08: ffffffff825c8435 R09: 000000000000000b
R10: 0000000000000005 R11: 0000000000000007 R12: ffff888131ac0000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f88330af6c0(0000) GS:ffff888a93dd2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88330aefe8 CR3: 000000010ff59000 CR4: 0000000000350ef0
Call Trace:
<TASK>
tcp_data_ready (net/ipv4/tcp_input.c:5356)
tcp_data_queue (net/ipv4/tcp_input.c:5445)
tcp_rcv_state_process (net/ipv4/tcp_input.c:7165)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1955)
__release_sock (include/net/sock.h:1158 (discriminator 6) net/core/sock.c:3180 (discriminator 6))
release_sock (net/core/sock.c:3737)
mptcp_sendmsg (net/mptcp/protocol.c:1763 net/mptcp/protocol.c:1857)
inet_sendmsg (net/ipv4/af_inet.c:853 (discriminator 7))
__sys_sendto (net/socket.c:727 (discriminator 15) net/socket.c:742 (discriminator 15) net/socket.c:2244 (discriminator 15))
__x64_sys_sendto (net/socket.c:2247)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f883326702d
Address the issue setting an explicit `fastclosing` flag at fastclose
time, and checking such flag after mptcp_do_fastclose(). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: exynos-clkout: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuset: fix warning when disabling remote partition
A warning was triggered as follows:
WARNING: kernel/cgroup/cpuset.c:1651 at remote_partition_disable+0xf7/0x110
RIP: 0010:remote_partition_disable+0xf7/0x110
RSP: 0018:ffffc90001947d88 EFLAGS: 00000206
RAX: 0000000000007fff RBX: ffff888103b6e000 RCX: 0000000000006f40
RDX: 0000000000006f00 RSI: ffffc90001947da8 RDI: ffff888103b6e000
RBP: ffff888103b6e000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88810b2e2728 R12: ffffc90001947da8
R13: 0000000000000000 R14: ffffc90001947da8 R15: ffff8881081f1c00
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f55c8bbe0b2 CR3: 000000010b14c000 CR4: 00000000000006f0
Call Trace:
<TASK>
update_prstate+0x2d3/0x580
cpuset_partition_write+0x94/0xf0
kernfs_fop_write_iter+0x147/0x200
vfs_write+0x35d/0x500
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f55c8cd4887
Reproduction steps (on a 16-CPU machine):
# cd /sys/fs/cgroup/
# mkdir A1
# echo +cpuset > A1/cgroup.subtree_control
# echo "0-14" > A1/cpuset.cpus.exclusive
# mkdir A1/A2
# echo "0-14" > A1/A2/cpuset.cpus.exclusive
# echo "root" > A1/A2/cpuset.cpus.partition
# echo 0 > /sys/devices/system/cpu/cpu15/online
# echo member > A1/A2/cpuset.cpus.partition
When CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUs
remain available for the top_cpuset, forcing partitions to share CPUs with
the top_cpuset. In this scenario, disabling the remote partition triggers
a warning stating that effective_xcpus is not a subset of
subpartitions_cpus. Partitions should be invalidated in this case to
inform users that the partition is now invalid(cpus are shared with
top_cpuset).
To fix this issue:
1. Only emit the warning only if subpartitions_cpus is not empty and the
effective_xcpus is not a subset of subpartitions_cpus.
2. During the CPU hotplug process, invalidate partitions if
subpartitions_cpus is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tilcdc: Fix removal actions in case of failed probe
The drm_kms_helper_poll_fini() and drm_atomic_helper_shutdown() helpers
should only be called when the device has been successfully registered.
Currently, these functions are called unconditionally in tilcdc_fini(),
which causes warnings during probe deferral scenarios.
[ 7.972317] WARNING: CPU: 0 PID: 23 at drivers/gpu/drm/drm_atomic_state_helper.c:175 drm_atomic_helper_crtc_duplicate_state+0x60/0x68
...
[ 8.005820] drm_atomic_helper_crtc_duplicate_state from drm_atomic_get_crtc_state+0x68/0x108
[ 8.005858] drm_atomic_get_crtc_state from drm_atomic_helper_disable_all+0x90/0x1c8
[ 8.005885] drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x90/0x144
[ 8.005911] drm_atomic_helper_shutdown from tilcdc_fini+0x68/0xf8 [tilcdc]
[ 8.005957] tilcdc_fini [tilcdc] from tilcdc_pdev_probe+0xb0/0x6d4 [tilcdc]
Fix this by rewriting the failed probe cleanup path using the standard
goto error handling pattern, which ensures that cleanup functions are
only called on successfully initialized resources. Additionally, remove
the now-unnecessary is_registered flag. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Use spinlock for context list protection lock
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/kexec: fix IMA when allocation happens in CMA area
*** Bug description ***
When I tested kexec with the latest kernel, I ran into the following warning:
[ 40.712410] ------------[ cut here ]------------
[ 40.712576] WARNING: CPU: 2 PID: 1562 at kernel/kexec_core.c:1001 kimage_map_segment+0x144/0x198
[...]
[ 40.816047] Call trace:
[ 40.818498] kimage_map_segment+0x144/0x198 (P)
[ 40.823221] ima_kexec_post_load+0x58/0xc0
[ 40.827246] __do_sys_kexec_file_load+0x29c/0x368
[...]
[ 40.855423] ---[ end trace 0000000000000000 ]---
*** How to reproduce ***
This bug is only triggered when the kexec target address is allocated in
the CMA area. If no CMA area is reserved in the kernel, use the "cma="
option in the kernel command line to reserve one.
*** Root cause ***
The commit 07d24902977e ("kexec: enable CMA based contiguous
allocation") allocates the kexec target address directly on the CMA area
to avoid copying during the jump. In this case, there is no IND_SOURCE
for the kexec segment. But the current implementation of
kimage_map_segment() assumes that IND_SOURCE pages exist and map them
into a contiguous virtual address by vmap().
*** Solution ***
If IMA segment is allocated in the CMA area, use its page_address()
directly. |
