Filtered by vendor Linux
Subscriptions
Total
12737 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38428 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - check record size in ims_pcu_flash_firmware() The "len" variable comes from the firmware and we generally do trust firmware, but it's always better to double check. If the "len" is too large it could result in memory corruption when we do "memcpy(fragment->data, rec->data, len);" | ||||
| CVE-2025-38427 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: video: screen_info: Relocate framebuffers behind PCI bridges Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes invalid access to I/O memory. Resources behind a PCI host bridge can be relocated by a certain offset in the kernel's CPU address range used for I/O. The framebuffer memory range stored in screen_info refers to the CPU addresses as seen during boot (where the offset is 0). During boot up, firmware may assign a different memory offset to the PCI host bridge and thereby relocating the framebuffer address of the PCI graphics device as seen by the kernel. The information in screen_info must be updated as well. The helper pcibios_bus_to_resource() performs the relocation of the screen_info's framebuffer resource (given in PCI bus addresses). The result matches the I/O-memory resource of the PCI graphics device (given in CPU addresses). As before, we store away the information necessary to later update the information in screen_info itself. Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers") added the code for updating screen_info. It is based on similar functionality that pre-existed in efifb. Efifb uses a pointer to the PCI resource, while the newer code does a memcpy of the region. Hence efifb sees any updates to the PCI resource and avoids the issue. v3: - Only use struct pci_bus_region for PCI bus addresses (Bjorn) - Clarify address semantics in commit messages and comments (Bjorn) v2: - Fixed tags (Takashi, Ivan) - Updated information on efifb | ||||
| CVE-2025-38425 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: check msg length in SMBUS block read For SMBUS block read, do not continue to read if the message length passed from the device is '0' or greater than the maximum allowed bytes. | ||||
| CVE-2025-38424 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix sample vs do_exit() Baisheng Gao reported an ARM64 crash, which Mark decoded as being a synchronous external abort -- most likely due to trying to access MMIO in bad ways. The crash further shows perf trying to do a user stack sample while in exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address space it is trying to access. It turns out that we stop perf after we tear down the userspace mm; a receipie for disaster, since perf likes to access userspace for various reasons. Flip this order by moving up where we stop perf in do_exit(). Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER to abort when the current task does not have an mm (exit_mm() makes sure to set current->mm = NULL; before commencing with the actual teardown). Such that CPU wide events don't trip on this same problem. | ||||
| CVE-2025-38423 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9375: Fix double free of regulator supplies Driver gets regulator supplies in probe path with devm_regulator_bulk_get(), so should not call regulator_bulk_free() in error and remove paths to avoid double free. | ||||
| CVE-2025-38421 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmf: Use device managed allocations If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations. | ||||
| CVE-2025-38420 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: do not ping device which has failed to load firmware Syzkaller reports [1, 2] crashes caused by an attempts to ping the device which has failed to load firmware. Since such a device doesn't pass 'ieee80211_register_hw()', an internal workqueue managed by 'ieee80211_queue_work()' is not yet created and an attempt to queue work on it causes null-ptr-deref. [1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff [2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217 | ||||
| CVE-2025-38419 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Cleanup acquired resources when rproc_handle_resources() fails in rproc_attach() When rproc->state = RPROC_DETACHED and rproc_attach() is used to attach to the remote processor, if rproc_handle_resources() returns a failure, the resources allocated by imx_rproc_prepare() should be released, otherwise the following memory leak will occur. Since almost the same thing is done in imx_rproc_prepare() and rproc_resource_cleanup(), Function rproc_resource_cleanup() is able to deal with empty lists so it is better to fix the "goto" statements in rproc_attach(). replace the "unprepare_device" goto statement with "clean_up_resources" and get rid of the "unprepare_device" label. unreferenced object 0xffff0000861c5d00 (size 128): comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............ backtrace: [<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c [<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0 [<00000000521c0345>] kmalloc_trace+0x40/0x158 [<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8 [<000000002815755e>] imx_rproc_prepare+0xe0/0x180 [<0000000003f61b4e>] rproc_boot+0x2ec/0x528 [<00000000e7e994ac>] rproc_add+0x124/0x17c [<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4 [<00000000efc298a1>] platform_probe+0x68/0xd8 [<00000000110be6fe>] really_probe+0x110/0x27c [<00000000e245c0ae>] __driver_probe_device+0x78/0x12c [<00000000f61f6f5e>] driver_probe_device+0x3c/0x118 [<00000000a7874938>] __device_attach_driver+0xb8/0xf8 [<0000000065319e69>] bus_for_each_drv+0x84/0xe4 [<00000000db3eb243>] __device_attach+0xfc/0x18c [<0000000072e4e1a4>] device_initial_probe+0x14/0x20 | ||||
| CVE-2025-38418 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Release rproc->clean_table after rproc_attach() fails When rproc->state = RPROC_DETACHED is attached to remote processor through rproc_attach(), if rproc_handle_resources() returns failure, then the clean table should be released, otherwise the following memory leak will occur. unreferenced object 0xffff000086a99800 (size 1024): comm "kworker/u12:3", pid 59, jiffies 4294893670 (age 121.140s) hex dump (first 32 bytes): 00 00 00 00 00 80 00 00 00 00 00 00 00 00 10 00 ............ 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 ............ backtrace: [<000000008bbe4ca8>] slab_post_alloc_hook+0x98/0x3fc [<000000003b8a272b>] __kmem_cache_alloc_node+0x13c/0x230 [<000000007a507c51>] __kmalloc_node_track_caller+0x5c/0x260 [<0000000037818dae>] kmemdup+0x34/0x60 [<00000000610f7f57>] rproc_boot+0x35c/0x56c [<0000000065f8871a>] rproc_add+0x124/0x17c [<00000000497416ee>] imx_rproc_probe+0x4ec/0x5d4 [<000000003bcaa37d>] platform_probe+0x68/0xd8 [<00000000771577f9>] really_probe+0x110/0x27c [<00000000531fea59>] __driver_probe_device+0x78/0x12c [<0000000080036a04>] driver_probe_device+0x3c/0x118 [<000000007e0bddcb>] __device_attach_driver+0xb8/0xf8 [<000000000cf1fa33>] bus_for_each_drv+0x84/0xe4 [<000000001a53b53e>] __device_attach+0xfc/0x18c [<00000000d1a2a32c>] device_initial_probe+0x14/0x20 [<00000000d8f8b7ae>] bus_probe_device+0xb0/0xb4 unreferenced object 0xffff0000864c9690 (size 16): | ||||
| CVE-2025-38417 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix eswitch code memory leak in reset scenario Add simple eswitch mode checker in attaching VF procedure and allocate required port representor memory structures only in switchdev mode. The reset flows triggers VF (if present) detach/attach procedure. It might involve VF port representor(s) re-creation if the device is configured is switchdev mode (not legacy one). The memory was blindly allocated in current implementation, regardless of the mode and not freed if in legacy mode. Kmemeleak trace: unreferenced object (percpu) 0x7e3bce5b888458 (size 40): comm "bash", pid 1784, jiffies 4295743894 hex dump (first 32 bytes on cpu 45): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): pcpu_alloc_noprof+0x4c4/0x7c0 ice_repr_create+0x66/0x130 [ice] ice_repr_create_vf+0x22/0x70 [ice] ice_eswitch_attach_vf+0x1b/0xa0 [ice] ice_reset_all_vfs+0x1dd/0x2f0 [ice] ice_pci_err_resume+0x3b/0xb0 [ice] pci_reset_function+0x8f/0x120 reset_store+0x56/0xa0 kernfs_fop_write_iter+0x120/0x1b0 vfs_write+0x31c/0x430 ksys_write+0x61/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Testing hints (ethX is PF netdev): - create at least one VF echo 1 > /sys/class/net/ethX/device/sriov_numvfs - trigger the reset echo 1 > /sys/class/net/ethX/device/reset | ||||
| CVE-2025-38416 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFC: nci: uart: Set tty->disc_data only in success path Setting tty->disc_data before opening the NCI device means we need to clean it up on error paths. This also opens some short window if device starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded (broken hardware?). Close the window by exposing tty->disc_data only on the success path, when opening of the NCI device and try_module_get() succeeds. The code differs in error path in one aspect: tty->disc_data won't be ever assigned thus NULL-ified. This however should not be relevant difference, because of "tty->disc_data=NULL" in nci_uart_tty_open(). | ||||
| CVE-2025-38415 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check return result of sb_min_blocksize Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug. Syzkaller forks multiple processes which after mounting the Squashfs filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000). Now if this ioctl occurs at the same time another process is in the process of mounting a Squashfs filesystem on /dev/loop0, the failure occurs. When this happens the following code in squashfs_fill_super() fails. ---- msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE); msblk->devblksize_log2 = ffz(~msblk->devblksize); ---- sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0. As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2 is set to 64. This subsequently causes the UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36 shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long') This commit adds a check for a 0 return by sb_min_blocksize(). | ||||
| CVE-2025-38414 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850 GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash on some specific platforms. Since this register is divergent for WCN7850 and QCN9274, move it to register table to allow different definitions. Then correct the register address for WCN7850 to fix this issue. Note IPQ5332 is not affected as it is not PCIe based device. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2025-38413 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: xsk: rx: fix the frame's length check When calling buf_to_xdp, the len argument is the frame data's length without virtio header's length (vi->hdr_len). We check that len with xsk_pool_get_rx_frame_size() + vi->hdr_len to ensure the provided len does not larger than the allocated chunk size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk, we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost to start placing data from hard_start + XDP_PACKET_HEADROOM - vi->hdr_len not hard_start + XDP_PACKET_HEADROOM But the first buffer has virtio_header, so the maximum frame's length in the first buffer can only be xsk_pool_get_rx_frame_size() not xsk_pool_get_rx_frame_size() + vi->hdr_len like in the current check. This commit adds an additional argument to buf_to_xdp differentiate between the first buffer and other ones to correctly calculate the maximum frame's length. | ||||
| CVE-2025-38412 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks After retrieving WMI data blocks in sysfs callbacks, check for the validity of them before dereferencing their content. | ||||
| CVE-2025-38411 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix double put of request If a netfs request finishes during the pause loop, it will have the ref that belongs to the IN_PROGRESS flag removed at that point - however, if it then goes to the final wait loop, that will *also* put the ref because it sees that the IN_PROGRESS flag is clear and incorrectly assumes that this happened when it called the collector. In fact, since IN_PROGRESS is clear, we shouldn't call the collector again since it's done all the cleanup, such as calling ->ki_complete(). Fix this by making netfs_collect_in_app() just return, indicating that we're done if IN_PROGRESS is removed. | ||||
| CVE-2025-38406 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: remove WARN on bad firmware input If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too. | ||||
| CVE-2025-38404 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: displayport: Fix potential deadlock The deadlock can occur due to a recursive lock acquisition of `cros_typec_altmode_data::mutex`. The call chain is as follows: 1. cros_typec_altmode_work() acquires the mutex 2. typec_altmode_vdm() -> dp_altmode_vdm() -> 3. typec_altmode_exit() -> cros_typec_altmode_exit() 4. cros_typec_altmode_exit() attempts to acquire the mutex again To prevent this, defer the `typec_altmode_exit()` call by scheduling it rather than calling it directly from within the mutex-protected context. | ||||
| CVE-2025-38403 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: Clear the vmci transport packet properly when initializing it In vmci_transport_packet_init memset the vmci_transport_packet before populating the fields to avoid any uninitialised data being left in the structure. | ||||
| CVE-2025-38402 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: return 0 size for RSS key if not supported Returning -EOPNOTSUPP from function returning u32 is leading to cast and invalid size value as a result. -EOPNOTSUPP as a size probably will lead to allocation fail. Command: ethtool -x eth0 It is visible on all devices that don't have RSS caps set. [ 136.615917] Call Trace: [ 136.615921] <TASK> [ 136.615927] ? __warn+0x89/0x130 [ 136.615942] ? __alloc_frozen_pages_noprof+0x322/0x330 [ 136.615953] ? report_bug+0x164/0x190 [ 136.615968] ? handle_bug+0x58/0x90 [ 136.615979] ? exc_invalid_op+0x17/0x70 [ 136.615987] ? asm_exc_invalid_op+0x1a/0x20 [ 136.616001] ? rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616016] ? __alloc_frozen_pages_noprof+0x322/0x330 [ 136.616028] __alloc_pages_noprof+0xe/0x20 [ 136.616038] ___kmalloc_large_node+0x80/0x110 [ 136.616072] __kmalloc_large_node_noprof+0x1d/0xa0 [ 136.616081] __kmalloc_noprof+0x32c/0x4c0 [ 136.616098] ? rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616105] rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616114] ethnl_default_doit+0x107/0x3d0 [ 136.616131] genl_family_rcv_msg_doit+0x100/0x160 [ 136.616147] genl_rcv_msg+0x1b8/0x2c0 [ 136.616156] ? __pfx_ethnl_default_doit+0x10/0x10 [ 136.616168] ? __pfx_genl_rcv_msg+0x10/0x10 [ 136.616176] netlink_rcv_skb+0x58/0x110 [ 136.616186] genl_rcv+0x28/0x40 [ 136.616195] netlink_unicast+0x19b/0x290 [ 136.616206] netlink_sendmsg+0x222/0x490 [ 136.616215] __sys_sendto+0x1fd/0x210 [ 136.616233] __x64_sys_sendto+0x24/0x30 [ 136.616242] do_syscall_64+0x82/0x160 [ 136.616252] ? __sys_recvmsg+0x83/0xe0 [ 136.616265] ? syscall_exit_to_user_mode+0x10/0x210 [ 136.616275] ? do_syscall_64+0x8e/0x160 [ 136.616282] ? __count_memcg_events+0xa1/0x130 [ 136.616295] ? count_memcg_events.constprop.0+0x1a/0x30 [ 136.616306] ? handle_mm_fault+0xae/0x2d0 [ 136.616319] ? do_user_addr_fault+0x379/0x670 [ 136.616328] ? clear_bhb_loop+0x45/0xa0 [ 136.616340] ? clear_bhb_loop+0x45/0xa0 [ 136.616349] ? clear_bhb_loop+0x45/0xa0 [ 136.616359] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 136.616369] RIP: 0033:0x7fd30ba7b047 [ 136.616376] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d bd d5 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44 [ 136.616381] RSP: 002b:00007ffde1796d68 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 136.616388] RAX: ffffffffffffffda RBX: 000055d7bd89f2a0 RCX: 00007fd30ba7b047 [ 136.616392] RDX: 0000000000000028 RSI: 000055d7bd89f3b0 RDI: 0000000000000003 [ 136.616396] RBP: 00007ffde1796e10 R08: 00007fd30bb4e200 R09: 000000000000000c [ 136.616399] R10: 0000000000000000 R11: 0000000000000202 R12: 000055d7bd89f340 [ 136.616403] R13: 000055d7bd89f3b0 R14: 000055d78943f200 R15: 0000000000000000 | ||||