| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: clear stale link state on full reset
After a full chip reset, mac80211 reconfig replays interface, link and
channel context setup. mt7996_vif_link_add() short-circuits when the
link_id is still marked in mvif->valid_links, a state introduced for
postponing link teardown to interface removal. The reset path frees the
link structures without clearing those bits, so the replayed setup never
re-creates dev_info/bss_info/STA records in the restarted firmware and
never re-registers the link wcid, leaving the device inoperative.
The reset path also leaks every allocated MLD index: per-link indices
and the per-vif group/remap indices are re-allocated from scratch during
reconfig, but the old bits stay set in the masks, so repeated full
resets exhaust the index space.
Clear valid_links in the reset vif iterator and reset the MLD index
masks alongside the existing omac_mask clearing. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: defrag: fix deadlock between defrag and delalloc space reservation
While running fsstress with autodefrag and flushoncommit, hit a deadlock
due to the fact that defrag reserves delalloc space while it's holding
dirty and locked folios, besides the extent range lock. The stack traces
are the following:
[958.624] task:kworker/u50:3 state:D stack:0 pid:20365 tgid:20365 ppid:2 task_flags:0x4208060 flags:0x00080000
[958.626] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
[958.627] Call Trace:
[958.628] <TASK>
[958.628] __schedule+0x4be/0x10f0
[958.629] ? preempt_count_add+0x69/0xa0
[958.630] schedule+0x26/0xd0
[958.631] wait_current_trans+0x102/0x160 [btrfs]
[958.632] ? __pfx_autoremove_wake_function+0x10/0x10
[958.633] start_transaction+0x374/0x900 [btrfs]
[958.634] btrfs_commit_current_transaction+0x1d/0x70 [btrfs]
[958.635] flush_space+0xca/0x5e0 [btrfs]
[958.636] ? _raw_spin_unlock+0x15/0x30
[958.637] ? btrfs_reduce_alloc_profile+0x8c/0x190 [btrfs]
[958.639] ? _raw_spin_unlock+0x15/0x30
[958.640] ? calc_available_free_space.isra.0+0x6f/0x110 [btrfs]
[958.641] do_async_reclaim_metadata_space+0x84/0x190 [btrfs]
[958.642] btrfs_async_reclaim_metadata_space+0x64/0x80 [btrfs]
[958.644] process_one_work+0x19d/0x3a0
[958.644] worker_thread+0x1c4/0x330
[958.645] ? __pfx_worker_thread+0x10/0x10
[958.646] kthread+0xfc/0x130
[958.647] ? __pfx_kthread+0x10/0x10
[958.648] ret_from_fork+0x1f7/0x2c0
[958.648] ? __pfx_kthread+0x10/0x10
[958.649] ret_from_fork_asm+0x1a/0x30
[958.650] </TASK>
[958.651] task:kworker/u49:7 state:D stack:0 pid:52990 tgid:52990 ppid:2 task_flags:0x4208060 flags:0x00080000
[958.653] Workqueue: writeback wb_workfn (flush-btrfs-334)
[958.655] Call Trace:
[958.655] <TASK>
[958.656] __schedule+0x4be/0x10f0
[958.657] ? __blk_flush_plug+0xe9/0x140
[958.658] schedule+0x26/0xd0
[958.658] io_schedule+0x42/0x70
[958.659] folio_wait_bit_common+0x12b/0x330
[958.660] ? folio_wait_bit_common+0x100/0x330
[958.662] ? __pfx_wake_page_function+0x10/0x10
[958.663] extent_write_cache_pages+0x599/0x830 [btrfs]
[958.664] ? acpi_fwnode_get_reference_args+0x1fa/0x270
[958.665] btrfs_writepages+0x77/0x130 [btrfs]
[958.666] ? __pfx_end_bbio_data_write+0x10/0x10 [btrfs]
[958.667] do_writepages+0xc6/0x160
[958.668] __writeback_single_inode+0x42/0x310
[958.669] writeback_sb_inodes+0x231/0x570
[958.670] wb_writeback+0x8a/0x340
[958.671] wb_workfn+0xbf/0x450
[958.672] ? finish_task_switch.isra.0+0xc1/0x350
[958.673] process_one_work+0x19d/0x3a0
[958.673] worker_thread+0x1c4/0x330
[958.674] ? __pfx_worker_thread+0x10/0x10
[958.675] kthread+0xfc/0x130
[958.676] ? __pfx_kthread+0x10/0x10
[958.676] ret_from_fork+0x1f7/0x2c0
[958.677] ? __pfx_kthread+0x10/0x10
[958.678] ret_from_fork_asm+0x1a/0x30
[958.679] </TASK>
[958.679] task:btrfs-cleaner state:D stack:0 pid:296750 tgid:296750 ppid:2 task_flags:0x208040 flags:0x00080000
[958.681] Call Trace:
[958.682] <TASK>
[958.682] __schedule+0x4be/0x10f0
[958.683] schedule+0x26/0xd0
[958.684] handle_reserve_ticket+0x1b9/0x2c0 [btrfs]
[958.685] ? __pfx_autoremove_wake_function+0x10/0x10
[958.686] reserve_bytes+0x283/0x4c0 [btrfs]
[958.687] btrfs_reserve_metadata_bytes+0x18/0xb0 [btrfs]
[958.688] btrfs_delalloc_reserve_metadata+0x121/0x320 [btrfs]
[958.690] btrfs_delalloc_reserve_space+0x46/0xb0 [btrfs]
[958.691] btrfs_defrag_file+0x903/0x1110 [btrfs]
[958.692] btrfs_run_defrag_inodes+0x334/0x430 [btrfs]
[958.694] cleaner_kthread+0x97/0x1c0 [btrfs]
[958.694] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
[958.696] kthread+0xfc/0x130
[958.696] ? __pfx_kthread+0x10/0x10
[958.697] ret_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject load-acquire from pointers requiring fault protection
A BPF_LOAD_ACQ is not rewritten to a BPF_PROBE_MEM load by the verifier,
unlike a regular BPF_LDX, so the JIT emits a plain load with no exception
table entry and a fault panics the kernel instead of being handled.
Reject the source pointer types that a BPF_LDX would have had that fault
protection applied to, i.e. the ones bpf_convert_ctx_accesses() turns
into BPF_PROBE_MEM: a bare PTR_TO_BTF_ID, PTR_TO_BTF_ID | PTR_UNTRUSTED,
PTR_TO_BTF_ID | MEM_ALLOC | PTR_UNTRUSTED and PTR_TO_MEM | MEM_RDONLY |
PTR_UNTRUSTED.
This is reachable e.g. by loading ->mm out of a trusted task_struct
yields an untrusted pointer to mm_struct, and it is NULL for a kernel
thread:
[...]
SEC("tp_btf/sched_switch")
int BPF_PROG(demo, bool preempt, struct task_struct *prev,
struct task_struct *next)
{
struct mm_struct *mm = next->mm; /* untrusted */
out_ldx = (__u64)mm->pgd; /* BPF_LDX */
out_acq = load_acquire(&mm->pgd); /* BPF_LOAD_ACQ */
return 0;
}
[...]
Both dereference the same pointer, but only the BPF_LDX is protected
(x86-64 JIT, jump targets shown prog-relative):
[...]
; out_ldx = (__u64)mm->pgd;
17: movq $-10485760, %r10
1e: movq %rsi, %r11
21: addq $184, %r11
28: subq %r10, %r11
2b: movabsq $140737498841088, %r10
35: cmpq %r10, %r11
38: ja 0x3e <-- kernel addr?
3a: xorl %edi, %edi <-- no: dst = 0, skip the load
3c: jmp 0x45
3e: movq 184(%rsi), %rdi <-- yes: load + extable entry
[...]
; load_acquire(&mm->pgd)
53: movq %rsi, %rdi
56: movq 184(%rdi), %rax <-- no check, no extable entry
[...]
Note that BPF_PROBE_MEM is not visible in a bpftool xlated dump, as
bpf_insn_prepare_dump() rewrites it back to BPF_MEM.
A PTR_TRUSTED pointer is deliberately not on the list. Such a load is
not converted either, but it does not need to be, since the pointer is
guaranteed live, so load-acquire from it stays allowed.
The check is gated on BPF_LOAD_ACQ so that atomic RMW and store-release
error messages are unchanged; writes (RMW / store-release) to such
pointers are already rejected elsewhere, so only load-acquire needs this. |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt
If a user unbinds an MSC after mpam_disable() has been run in response
to an error interrupt then a dereference of a NULL pointer occurs as
mpam_disable() sets the drvdata to NULL. Add an early return to the driver
remove callback to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: prevent create failure bitmap UAF
llbitmap_create() publishes mddev->bitmap before reading the bitmap
superblock. This is needed because llbitmap_read_sb() can initialize a
new bitmap and flush it through helpers that use mddev->bitmap.
If llbitmap_read_sb() fails, the old cleanup dropped bitmap_info.mutex
and freed llbitmap before clearing mddev->bitmap. Readers such as
/proc/mdstat rely on bitmap_info.mutex to keep the bitmap pointer stable
while collecting bitmap stats, so they could observe the stale pointer
after the failed create path released the mutex.
Clear mddev->bitmap while still holding bitmap_info.mutex, then free the
failed llbitmap after dropping the mutex. This makes mutex-protected
readers see either a live bitmap or no bitmap. |
| In the Linux kernel, the following vulnerability has been resolved:
md: wait for behind writes before destroying bitmap
__md_stop() destroyed the bitmap before calling mddev_detach(). That made
mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap
was already disconnected from mddev.
This was still safe for the legacy bitmap because bitmap_destroy() waits
for behind writes itself. llbitmap keeps that wait in its
->wait_behind_writes() operation instead, while ->destroy() tears down the
llbitmap storage. With the old ordering, RAID1 behind-write completions
could still run after llbitmap storage had been freed.
Call mddev_detach() before md_bitmap_destroy() so the common detach path
can wait for behind writes while the bitmap is still alive. Only destroy
the bitmap after those users are gone. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb: Fix possible NULL-deref on early runtime suspend
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: free vif links after clearing wcid entries on full reset
mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu
while dev->wcid[] still holds pointers to the wcid embedded in each
freed link; mt76_reset_device() then dereferences those entries and
runs mt76_wcid_cleanup() on them. If a grace period elapses in between,
the cleanup operates on freed memory.
Run mt76_reset_device() first, so the wcid entries are cleaned up and
cleared while the links are still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement
The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix trampoline stack size for 128-bit arguments
btf_distill_func_proto() accepts a function argument up to 16 bytes, so a
128-bit scalar such as __int128 reaches the x86 trampoline with
arg_size == 16. But the current implementation assumes an __int128
argument only needs one register, so the register save area is
under-allocated and save_args() overwrites adjacent stack slots.
Compute the register count from arg_size for all arguments to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path
qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time
after releasing optrom_mutex. The repeated read is redundant and, unlike
the first, runs without optrom_mutex held, exposing flash access to
concurrent optrom operations. Drop the duplicate call. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure
for_each_child_of_node_scoped() releases the node reference on scope
exit, so the explicit of_node_put(np) in the devm_phy_create() error
path drops it twice.
Drop the redundant of_node_put() and let the scoped cleanup handle it. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix devres accumulation across driver rebind
imx6_soc_volt is allocated with devm_kcalloc(cpu_dev, ...), where cpu_dev
is the CPU device from get_cpu_device(0). That device is never unbound, so
its devres list is never released, and imx6q_cpufreq_remove() does not free
the array either. Every probe therefore adds an allocation that stays for
the lifetime of the system.
Allocate against the platform device instead. Its devres is released when
the driver is unbound, which is exactly the lifetime the array wants:
imx6q_set_target() reads it, and nothing may reach that after
cpufreq_unregister_driver().
That makes the array actually go away on unbind, so also clear the
file-scope pointer in remove and on the failed-probe path, rather than
leave it pointing at memory devres is about to release.
Tested by rebinding the driver on qemu's mcimx6ul-evk. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9484/1: enable interrupts when unhandled user faults are triggered
PREEMPT_RT requires interrupts to be enabled when sending signals.
When do_DataAbort()/do_PrefetchAbort() triggers unhandled user faults,
that is `inf->fn()` return a non-zero value, and the interrupts are not
enabled within the hook function, force_sig_fault() will be called
with interrupts disabled.
This can be triggered by user programs executing the bkpt instruction,
with kernel config CONFIG_PERF_EVENTS=n.
Enable interrupts in do_DataAbort()/do_PrefetchAbort() when unhandled
user faults are triggered to fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Free debugfs on registration failure
c4iw_alloc() creates the per-device debugfs tree (dev->debugfs_root via
setup_debugfs()), but it is removed only in c4iw_remove(), not in
c4iw_dealloc(). When RDMA device registration fails, the registration
worker's err_dealloc_ctx path calls c4iw_dealloc() directly, bypassing
c4iw_remove(), so the debugfs dentries leak and outlive the freed
c4iw_dev.
Move debugfs_remove_recursive() into c4iw_dealloc() so every path that
frees ctx->dev also removes its debugfs tree. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Release the export reference when reaping open stateids
nfs4_put_stid() releases the svc_export tracked in
nfs4_stid.sc_export, but free_ol_stateid_reaplist() frees open and
lock stateids by calling ->sc_free() directly, bypassing that path.
An open stateid takes an sc_export reference in nfs4_open() and a
lock stateid takes its own in init_lock_stateid(); both reach
free_ol_stateid_reaplist() through their normal teardown, the open
stateid via release_open_stateid() and the lock stateid via
nfsd4_release_lockowner(), each through put_ol_stateid_locked().
The reference is therefore never dropped, pinning the export and
blocking unmount for the lifetime of the stateid.
Release sc_export in free_ol_stateid_reaplist() the way
nfs4_put_stid() does. ->sc_free() runs once per stateid, and a
stateid reaches free_ol_stateid_reaplist() or nfs4_put_stid() but
never both, so the reference is dropped exactly once. Revoked
stateids reach this path with sc_export already cleared by
drop_stid_export(), so they are skipped rather than double-freed.
nfs4_put_stid() itself read sc_export before acquiring cl_lock.
drop_stid_export() clears that field and releases the reference
under cl_lock, so a concurrent revocation could drop the export in
the window between the read and the final put, releasing the same
reference twice. Read sc_export while cl_lock is held so the two
paths serialize and the reference is released exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence.
If one of them fails, it jumps to error_no_memory and returns -ENOMEM
without releasing the pools that were already allocated, leaking them.
Release the already-allocated pools before returning. isp4if_gpu_mem_free()
is a no-op on pools that were not allocated, so calling
isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that
succeeded.
isp4if_gpu_mem_free() previously logged an error for a NULL entry, which
is a normal case during partial-allocation cleanup, so make it silent. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: hwmon: Remove hwmon class device along with its parent
The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/
because the type is "acpitz" for both of them, but it adds a sysfs
attribute that belongs to thermal_zone1 under it:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input
There is also
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
which belongs to thermal_zone0.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, thermal_remove_hwmon_sysfs()
skips the removal of hwmon0 because of the temp2_input attribute
belonging to thermal_zone1 which effectively prevents thermal_zone0
removal from making progress.
Address this by making thermal_remove_hwmon_sysfs() remove the entire
hwmon class device interface for the given thermal zone type when the
thermal zone device holding it is removed.
To prevent races with thermal_add_hwmon_sysfs() that may interfere
with this, carry out the entire addition and removal of hwmon sysfs
interfaces for thermal zones under thermal_hwmon_list_lock.
Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to
the current kernel coding style to align with the new "unlock" label. |
