| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback
The interrupt core calls the irq_domain_activate() callback from
__setup_irq() with desc->lock held and interrupts disabled. Both
aspeed_intc1_irq_domain_activate() and aspeed_intc0_resolve_route() test a
compatible string with fwnode_device_is_compatible().
fwnode_device_is_compatible() invokes fwnode_property_match_string(), which
allocates with GFP_KERNEL. That's obviously not possible with interrupts
disabled and a raw spinlock held.
Both call sites are only ever handed OF nodes, so use
of_device_is_compatible() instead: it walks the property in place and does
not allocate. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix request buffer leak in smb2_new_read_req()
smb2_new_read_req() allocates the request buffer with
smb2_plain_req_init() but only publishes it to the caller with
*buf = req at the very end of the function. Two error returns sit in
between:
rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server,
(void **) &req, total_len);
if (rc)
return rc;
if (server == NULL)
return -ECONNABORTED;
[...]
rdata->mr = smbd_register_mr(server->smbd_conn,
&rdata->subreq.io_iter,
true, need_invalidate);
if (!rdata->mr)
return -EAGAIN;
On either of them the buffer is neither released nor handed back, so
it is leaked. The caller cannot clean up after it: smb2_async_readv()
does 'goto out' on a non-zero return, which skips the
cifs_small_buf_release(buf) at async_readv_out, and buf has not been
assigned at that point in any case.
The write path has never had this problem. smb2_async_writev()
registers the memory region inline and jumps to its release label
instead of returning:
wdata->mr = smbd_register_mr(...);
if (!wdata->mr) {
rc = -EAGAIN;
goto async_writev_out;
}
Commit b7972092199f ("cifs: smbd: Retry on memory registration
failure") changed both sides from -ENOBUFS to -EAGAIN in a single
patch, which puts the two shapes next to each other.
Only the -EAGAIN return is reachable in practice, because
smb2_plain_req_init() calls smb2_reconnect() first and that already
fails with -EIO when server is NULL, before anything is allocated.
Both returns are given the same treatment here rather than leaving
one of them correct only by accident.
Because -EAGAIN is a replayable error, the failure also reaches the
retry block at the end of smb2_async_readv(), which marks the
subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be
retried rather than ending the I/O, and every attempt that reaches it
leaks another buffer. smb2_should_replay() short-circuits on
tcon->retry, so on a hard mount the attempt count is not bounded by
the retrans setting.
Only the asynchronous read path is affected. The synchronous
SMB2_read() caller passes rdata == NULL and the memory registration
block is guarded on rdata.
The memory registration failure path was pointed out by the Sashiko
AI reviewer while it was reviewing an unrelated patch to
smb2_async_readv(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local_page() usage in compress
Several compressed I/O paths discard the address returned by
kmap_local_page() and later access or unmap the page using page_address().
This is invalid for highmem pages, and local mappings must also be unmapped
using the address returned by kmap_local_page().
Map each destination page in ntfs_decompress() only while producing the
current sub-block. Use memcpy_from_page(), memcpy_to_page(), and
memzero_page() for the other page accesses. Remove unnecessary local
mappings from ntfs_write_cb(), where pages are accessed through the vmap()
mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix resize of the RX ring
When a AF_XDP socket is attached, the virtnet_rx_resize
should resize the rq->xsk_buffs XSK buffer array. Otherwise,
when the size grows, the virtnet_rx_resume() causes a write
past the end of the array. This is easily reproducable with
ethtool -G ens3 rx 32
./xdpsock -i eth0 -q 0 -r -z &
ethtool -G eth0 rx 256 |
| Azure Arc Elevation of Privilege Vulnerability |
| A flaw was found in Netty's Online Certificate Status Protocol (OCSP) Client. The client fails to verify the 'id-kp-OCSPSigning' Extended Key Usage (EKU) in OCSP responder certificates. A remote attacker, holding any valid certificate issued by the same Certificate Authority (CA), can exploit this by forging 'GOOD' OCSP responses for revoked certificates. This bypasses certificate revocation checks, allowing applications using Netty's OCSP Client to accept certificates that should have been revoked, leading to an authorization bypass. |
| A flaw was found in Netty. A remote attacker could exploit this by sending a specially crafted HTTP request that includes control characters within the chunk-size line. This bypasses the intended strict validation, allowing the attacker to inject arbitrary HTTP requests. This vulnerability can lead to HTTP request smuggling, potentially resulting in information disclosure or other unauthorized actions. |
| A flaw was found in Netty. A remote unauthenticated attacker can exploit a vulnerability in Netty's HTTP/1 to HTTP/2 conversion process. When an HTTP/1 request includes both an absolute-form request-target and a conflicting Host header, Netty incorrectly prioritizes the Host header for the HTTP/2 :authority field, discarding the original request-target authority. This inconsistency can allow an attacker to bypass security controls in Netty-based proxies or gateways, potentially leading to unauthorized access, cache poisoning, or misrouting of requests. |
| A flaw was found in Netty netty-codec-smtp. The component does not properly validate Carriage Return (CR) and Line Feed (LF) characters in the SMTP command-name field. A remote attacker, if an application routes untrusted input into this field, can embed CR/LF characters to inject arbitrary SMTP commands. This can lead to SMTP command smuggling, allowing for unauthorized email relay or spoofing of sender/recipient addresses. While the impact is significant, the real-world exploitability is considered lower as applications typically do not place user-controlled data in the command-name field. |
| A flaw was found in the multicluster-observability-addon. A remote attacker can access a debug endpoint without authentication, due to a misconfiguration in the underlying addon-framework library. This allows for the disclosure of sensitive operational information, such as goroutine, heap, and command-line details, after completing a basic encrypted connection. This vulnerability does not enable direct remote code execution. |
| The The Divi theme for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.11.1. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. When the 'Force Enable D4 Shortcode Framework' option is enabled, this includes invoking the et_pb_contact_form shortcode to send email to an attacker-selected recipient with attacker-controlled content. |
| Improper neutralization of special elements used in a command ('command injection') in M365 Copilot allows an authorized attacker to elevate privileges over a network. |
| Server-side request forgery (ssrf) in Azure AI Foundry allows an unauthorized attacker to elevate privileges over a network. |
| Local privilege escalation due to insecure file permissions. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 1.9.3.1021, Acronis Backup extension for Plesk (Linux) before build 1.8.11.638, Acronis Backup plugin for DirectAdmin (Linux) before build 1.2.3.238. |
| The Booking Calendar plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'options' parameter in all versions up to, and including, 11.8.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. The nonce check is bypassed by default because the 'booking_is_nonce_at_front_end' option ships disabled, allowing unauthenticated requests to reach the vulnerable sink without any verification. |
| A flaw was found in Netty's `RedisArrayAggregator` component. A remote attacker can exploit this vulnerability by sending specially crafted nested Redis (RESP) array headers. This can cause the `RedisArrayAggregator` to eagerly preallocate a large amount of heap memory, leading to heap memory exhaustion and a Denial of Service (DoS) for applications using `RedisDecoder` with `RedisArrayAggregator` on untrusted traffic. |
| A flaw was found in Netty. SpdySessionHandler accepts an unlimited number of concurrent remote-initiated streams because localConcurrentStreams defaults to Integer.MAX_VALUE and the handler provides no API to change it. A remote peer can open a SPDY connection and send a large number of SYN_STREAM frames with FLAG_FIN=0, causing unbounded heap and direct memory allocation that can lead to JVM OutOfMemoryError and a denial of service. |
| A flaw was found in Netty's HTTP/2 HpackEncoder. A remote attacker can exploit this by sending HTTP/2 SETTINGS frames with a very large MAX_HEADER_TABLE_SIZE. This causes the HpackEncoder to store an excessive number of unique headers, leading to increased CPU usage and memory consumption, ultimately resulting in a Denial of Service (DoS). |
| The Custom Twitter Feeds – A Tweets Widget or X Feed Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'buttoncolor' Shortcode Attribute in all versions up to, and including, 2.8.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This vulnerability is exploitable on common installs where the admin has configured access tokens with zero or multiple legacy feeds, as this causes the ctf_statuses support_legacy_shortcode option to be set to boolean true by default, activating the unfiltered legacy shortcode attribute code path. |
| An improper authentication vulnerability has been reported to affect product. The remote attackers can then exploit the vulnerability to compromise the security of the system.
QTS is not affected.
We have already fixed the vulnerability in the following version: |
