| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Using uninitialized value *size when calling amdgpu_vce_cs_reloc
Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001.
V2: To really improve the handling we would actually
need to have a separate value of 0xffffffff.(Christian) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid uninitialized value in BPF_CORE_READ_BITFIELD
[Changes from V1:
- Use a default branch in the switch statement to initialize `val'.]
GCC warns that `val' may be used uninitialized in the
BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as:
[...]
unsigned long long val; \
[...] \
switch (__CORE_RELO(s, field, BYTE_SIZE)) { \
case 1: val = *(const unsigned char *)p; break; \
case 2: val = *(const unsigned short *)p; break; \
case 4: val = *(const unsigned int *)p; break; \
case 8: val = *(const unsigned long long *)p; break; \
} \
[...]
val; \
} \
This patch adds a default entry in the switch statement that sets
`val' to zero in order to avoid the warning, and random values to be
used in case __builtin_preserve_field_info returns unexpected values
for BPF_FIELD_BYTE_SIZE.
Tested in bpf-next master.
No regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
inet_diag: Initialize pad field in struct inet_diag_req_v2
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.
inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.
Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.
[1]
BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline]
BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71
raw_lookup net/ipv4/raw_diag.c:49 [inline]
raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71
raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99
inet_diag_cmd_exact+0x7d9/0x980
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline]
inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564
sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x332/0x3d0 net/socket.c:745
____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585
___sys_sendmsg+0x271/0x3b0 net/socket.c:2639
__sys_sendmsg net/socket.c:2668 [inline]
__do_sys_sendmsg net/socket.c:2677 [inline]
__se_sys_sendmsg net/socket.c:2675 [inline]
__x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675
x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71
raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99
inet_diag_cmd_exact+0x7d9/0x980
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline]
inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564
sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x332/0x3d0 net/socket.c:745
____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585
___sys_sendmsg+0x271/0x3b0 net/socket.c:2639
__sys_sendmsg net/socket.c:2668 [inline]
__do_sys_sendmsg net/socket.c:2677 [inline]
__se_sys_sendmsg net/socket.c:2675 [inline]
__x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675
x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable req.i created at:
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline]
inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
net: can: j1939: Initialize unused data in j1939_send_one()
syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one()
creates full frame including unused data, but it doesn't initialize
it. This causes the kernel-infoleak issue. Fix this by initializing
unused data.
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
instrument_copy_to_user include/linux/instrumented.h:114 [inline]
copy_to_user_iter lib/iov_iter.c:24 [inline]
iterate_ubuf include/linux/iov_iter.h:29 [inline]
iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
iterate_and_advance include/linux/iov_iter.h:271 [inline]
_copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
copy_to_iter include/linux/uio.h:196 [inline]
memcpy_to_msg include/linux/skbuff.h:4113 [inline]
raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008
sock_recvmsg_nosec net/socket.c:1046 [inline]
sock_recvmsg+0x2c4/0x340 net/socket.c:1068
____sys_recvmsg+0x18a/0x620 net/socket.c:2803
___sys_recvmsg+0x223/0x840 net/socket.c:2845
do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939
__sys_recvmmsg net/socket.c:3018 [inline]
__do_sys_recvmmsg net/socket.c:3041 [inline]
__se_sys_recvmmsg net/socket.c:3034 [inline]
__x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034
x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1313 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
sock_alloc_send_skb include/net/sock.h:1842 [inline]
j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline]
j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline]
j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
____sys_sendmsg+0x877/0xb60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Bytes 12-15 of 16 are uninitialized
Memory access of size 16 starts at ffff888120969690
Data copied to user address 00000000200017c0
CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Set run context for rawtp test_run callback
syzbot reported crash when rawtp program executed through the
test_run interface calls bpf_get_attach_cookie helper or any
other helper that touches task->bpf_ctx pointer.
Setting the run context (task->bpf_ctx pointer) for test_run
callback. |
| IBM Security Verify Access Appliance 10.0.0 through 10.0.7 uses uninitialized variables when deploying that could allow a local user to cause a denial of service. IBM X-Force ID: 287318. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: zpa2326: fix information leak in triggered buffer
The 'sample' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the temperature and the
timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp).
This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
The 'data' array is allocated via kmalloc() and it is used to push data
to user space from a triggered buffer, but it does not set values for
inactive channels, as it only uses iio_for_each_active_channel()
to assign new values.
Use kzalloc for the memory allocation to avoid pushing uninitialized
information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: vcnl4035: fix information leak in triggered buffer
The 'buffer' local array is used to push data to userspace from a
triggered buffer, but it does not set an initial value for the single
data element, which is an u16 aligned to 8 bytes. That leaves at least
4 bytes uninitialized even after writing an integer value with
regmap_read().
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: kmx61: fix information leak in triggered buffer
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: rockchip_saradc: fix information leak in triggered buffer
The 'data' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads8688: fix information leak in triggered buffer
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl'
variable, and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently tagged_addr_ctrl_set() will consume an
arbitrary value, potentially leaking up to 64 bits of memory from the
kernel stack. The read is limited to a specific slot on the stack, and
the issue does not provide a write mechanism.
As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and
rejects other values, a partial SETREGSET attempt will randomly succeed
or fail depending on the value of the uninitialized value, and the
exposure is significantly limited.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
value of the tagged address ctrl will be retained.
The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the
user_aarch64_view used by a native AArch64 task to manipulate another
native AArch64 task. As get_tagged_addr_ctrl() only returns an error
value when called for a compat task, tagged_addr_ctrl_get() and
tagged_addr_ctrl_set() should never observe an error value from
get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that
such an error would be unexpected, and error handlnig is not missing in
either case. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
Syzbot reports [1] an uninitialized value issue found by KMSAN in
dib3000_read_reg().
Local u8 rb[2] is used in i2c_transfer() as a read buffer; in case
that call fails, the buffer may end up with some undefined values.
Since no elaborate error handling is expected in dib3000_write_reg(),
simply zero out rb buffer to mitigate the problem.
[1] Syzkaller report
dvb-usb: bulk message failed: -22 (6/0)
=====================================================
BUG: KMSAN: uninit-value in dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
dibusb_dib3000mb_frontend_attach+0x155/0x2f0 drivers/media/usb/dvb-usb/dibusb-mb.c:31
dvb_usb_adapter_frontend_init+0xed/0x9a0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:90 [inline]
dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:186 [inline]
dvb_usb_device_init+0x25a8/0x3760 drivers/media/usb/dvb-usb/dvb-usb-init.c:310
dibusb_probe+0x46/0x250 drivers/media/usb/dvb-usb/dibusb-mb.c:110
...
Local variable rb created at:
dib3000_read_reg+0x86/0x4e0 drivers/media/dvb-frontends/dib3000mb.c:54
dib3000mb_attach+0x123/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
... |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
If the __rtc_read_time call fails,, the struct rtc_time tm; may contain
uninitialized data, or an illegal date/time read from the RTC hardware.
When calling rtc_tm_to_ktime later, the result may be a very large value
(possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue,
they will continually expire, may causing kernel softlockup. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: avoid potential out-of-bound access in fill_frame_info()
syzbot is able to feed a packet with 14 bytes, pretending
it is a vlan one.
Since fill_frame_info() is relying on skb->mac_len already,
extend the check to cover this case.
BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline]
BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724
fill_frame_info net/hsr/hsr_forward.c:709 [inline]
hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724
hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606
__dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3146 [inline]
packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
__sys_sendto+0x594/0x750 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2200
x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4091 [inline]
slab_alloc_node mm/slub.c:4134 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1323 [inline]
alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881
packet_alloc_skb net/packet/af_packet.c:2995 [inline]
packet_snd net/packet/af_packet.c:3089 [inline]
packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
__sys_sendto+0x594/0x750 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2200
x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: free inode when ocfs2_get_init_inode() fails
syzbot is reporting busy inodes after unmount, for commit 9c89fe0af826
("ocfs2: Handle error from dquot_initialize()") forgot to call iput() when
new_inode() succeeded and dquot_initialize() failed. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
Under certain kernel configurations when building with Clang/LLVM, the
compiler does not generate a return or jump as the terminator
instruction for ip_vs_protocol_init(), triggering the following objtool
warning during build time:
vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6()
At runtime, this either causes an oops when trying to load the ipvs
module or a boot-time panic if ipvs is built-in. This same issue has
been reported by the Intel kernel test robot previously.
Digging deeper into both LLVM and the kernel code reveals this to be a
undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer
of 64 chars to store the registered protocol names and leaves it
uninitialized after definition. The function calls strnlen() when
concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE
strnlen() performs an extra step to check whether the last byte of the
input char buffer is a null character (commit 3009f891bb9f ("fortify:
Allow strlen() and strnlen() to pass compile-time known lengths")).
This, together with possibly other configurations, cause the following
IR to be generated:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 {
%1 = alloca [64 x i8], align 16
...
14: ; preds = %11
%15 = getelementptr inbounds i8, ptr %1, i64 63
%16 = load i8, ptr %15, align 1
%17 = tail call i1 @llvm.is.constant.i8(i8 %16)
%18 = icmp eq i8 %16, 0
%19 = select i1 %17, i1 %18, i1 false
br i1 %19, label %20, label %23
20: ; preds = %14
%21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23
...
23: ; preds = %14, %11, %20
%24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24
...
}
The above code calculates the address of the last char in the buffer
(value %15) and then loads from it (value %16). Because the buffer is
never initialized, the LLVM GVN pass marks value %16 as undefined:
%13 = getelementptr inbounds i8, ptr %1, i64 63
br i1 undef, label %14, label %17
This gives later passes (SCCP, in particular) more DCE opportunities by
propagating the undef value further, and eventually removes everything
after the load on the uninitialized stack location:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 {
%1 = alloca [64 x i8], align 16
...
12: ; preds = %11
%13 = getelementptr inbounds i8, ptr %1, i64 63
unreachable
}
In this way, the generated native code will just fall through to the
next function, as LLVM does not generate any code for the unreachable IR
instruction and leaves the function without a terminator.
Zero the on-stack buffer to avoid this possible UB. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
Syzbot has reported the following KMSAN splat:
BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80
ocfs2_file_read_iter+0x9a4/0xf80
__io_read+0x8d4/0x20f0
io_read+0x3e/0xf0
io_issue_sqe+0x42b/0x22c0
io_wq_submit_work+0xaf9/0xdc0
io_worker_handle_work+0xd13/0x2110
io_wq_worker+0x447/0x1410
ret_from_fork+0x6f/0x90
ret_from_fork_asm+0x1a/0x30
Uninit was created at:
__alloc_pages_noprof+0x9a7/0xe00
alloc_pages_mpol_noprof+0x299/0x990
alloc_pages_noprof+0x1bf/0x1e0
allocate_slab+0x33a/0x1250
___slab_alloc+0x12ef/0x35e0
kmem_cache_alloc_bulk_noprof+0x486/0x1330
__io_alloc_req_refill+0x84/0x560
io_submit_sqes+0x172f/0x2f30
__se_sys_io_uring_enter+0x406/0x41c0
__x64_sys_io_uring_enter+0x11f/0x1a0
x64_sys_call+0x2b54/0x3ba0
do_syscall_64+0xcd/0x1e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Since an instance of 'struct kiocb' may be passed from the block layer
with 'private' field uninitialized, introduce 'ocfs2_iocb_init_rw_locked()'
and use it from where 'ocfs2_dio_end_io()' might take care, i.e. in
'ocfs2_file_read_iter()' and 'ocfs2_file_write_iter()'. |
| FreeRDP is a free remote desktop protocol library and clients. All FreeRDP based clients when using the `/video` command line switch might read uninitialized data, decode it as audio/video and display the result. FreeRDP based server implementations are not affected. This issue has been patched in version 2.8.1. If you cannot upgrade do not use the `/video` switch. |
