| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback
In create_sdw_dailink() check that sof_end->codec_info->add_sidecar
is not NULL before calling it.
The original code assumed that if include_sidecar is true, the codec
on that link has an add_sidecar callback. But there could be other
codecs on the same link that do not have an add_sidecar callback. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+) |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: set dummy blocksize to read boot_block when mounting
When mounting, sb->s_blocksize is used to read the boot_block without
being defined or validated. Set a dummy blocksize before attempting to
read the boot_block.
The issue can be triggered with the following syz reproducer:
mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0)
r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0)
ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000)
mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00',
&(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0)
syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0)
Here, the ioctl sets the bdev block size to 16384. During mount,
get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)),
but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves
sb->s_blocksize at zero.
Later, ntfs_init_from_boot() attempts to read the boot_block while
sb->s_blocksize is still zero, which triggers the bug.
[almaz.alexandrovich@paragon-software.com: changed comment style, added
return value handling] |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:
kernfs: can not remove 'nr_tags', no directory
WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
Call Trace:
remove_files.isra.1+0x38/0xb0
sysfs_remove_group+0x4d/0x100
sysfs_remove_groups+0x31/0x60
__kobject_del+0x23/0xf0
kobject_del+0x17/0x40
blk_mq_unregister_hctx+0x5d/0x80
blk_mq_sysfs_unregister_hctxs+0x94/0xd0
blk_mq_update_nr_hw_queues+0x124/0x760
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x92/0x120 [null_blk]
kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it. |
| In the Linux kernel, the following vulnerability has been resolved:
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III
Anthony Yznaga tracked down that a BUG_ON in ext4 code with large folios
enabled resulted from copy_from_user() returning impossibly large values
greater than the size to be copied. This lead to __copy_from_iter()
returning impossible values instead of the actual number of bytes it was
able to copy.
The BUG_ON has been reported in
https://lore.kernel.org/r/b14f55642207e63e907965e209f6323a0df6dcee.camel@physik.fu-berlin.de
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. The exception handlers expect that
%o2 has already been masked during the bulk copy loop, but the masking was
performed after that loop. This will fix the return value of copy_from_user
and copy_to_user in the faulting case. The behaviour of memcpy stays
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: using the num_tqps in the vf driver to apply for resources
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Enforce expected_attach_type for tailcall compatibility
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: imon: make send_packet() more robust
syzbot is reporting that imon has three problems which result in
hung tasks due to forever holding device lock [1].
First problem is that when usb_rx_callback_intf0() once got -EPROTO error
after ictx->dev_present_intf0 became true, usb_rx_callback_intf0()
resubmits urb after printk(), and resubmitted urb causes
usb_rx_callback_intf0() to again get -EPROTO error. This results in
printk() flooding (RCU stalls).
Alan Stern commented [2] that
In theory it's okay to resubmit _if_ the driver has a robust
error-recovery scheme (such as giving up after some fixed limit on the
number of errors or after some fixed time has elapsed, perhaps with a
time delay to prevent a flood of errors). Most drivers don't bother to
do this; they simply give up right away. This makes them more
vulnerable to short-term noise interference during USB transfers, but in
reality such interference is quite rare. There's nothing really wrong
with giving up right away.
but imon has a poor error-recovery scheme which just retries forever;
this behavior should be fixed.
Since I'm not sure whether it is safe for imon users to give up upon any
error code, this patch takes care of only union of error codes chosen from
modules in drivers/media/rc/ directory which handle -EPROTO error (i.e.
ir_toy, mceusb and igorplugusb).
Second problem is that when usb_rx_callback_intf0() once got -EPROTO error
before ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() always
resubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedge
hardware after early callbacks"). Move the ictx->dev_present_intf0 test
introduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodes
until intf configured") to immediately before imon_incoming_packet(), or
the first problem explained above happens without printk() flooding (i.e.
hung task).
Third problem is that when usb_rx_callback_intf0() is not called for some
reason (e.g. flaky hardware; the reproducer for this problem sometimes
prevents usb_rx_callback_intf0() from being called),
wait_for_completion_interruptible() in send_packet() never returns (i.e.
hung task). As a workaround for such situation, change send_packet() to
wait for completion with timeout of 10 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Add missing terminator for zen5_rdseed_microcode
Running x86_match_min_microcode_rev() on a Zen5 CPU trips up KASAN for an out
of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
After restructuring and splitting the HDMI codec driver code, each
HDMI codec driver contains the own build_controls and build_pcms ops.
A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both
build_controls and build_pcms are swapped. Unfortunately both
callbacks have the very same form, and the compiler didn't complain
it, either. This resulted in a NULL dereference because the PCM
instance hasn't been initialized at calling the build_controls
callback.
Fix it by passing the proper entries. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/plane: Fix create_in_format_blob() return value
create_in_format_blob() is either supposed to return a valid
pointer or an error, but never NULL. The caller will dereference
the blob when it is not an error, and thus will oops if NULL
returned. Return proper error values in the failure cases. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
"struct sdca_control" declares "values" field as integer array.
But the memory allocated to it is of char array. This causes
crash for sdca_parse_function API. This patch addresses the
issue by allocating correct data size. |
| In the Linux kernel, the following vulnerability has been resolved:
most: usb: fix double free on late probe failure
The MOST subsystem has a non-standard registration function which frees
the interface on registration failures and on deregistration.
This unsurprisingly leads to bugs in the MOST drivers, and a couple of
recent changes turned a reference underflow and use-after-free in the
USB driver into several double free and a use-after-free on late probe
failures. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmod
Since commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when
device is gone") UBSAN reports:
UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17
index 28 is out of range for type 'pm8001_phy [16]'
on rmmod when using an expander.
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a
device behind an expander, attached_phy can be much larger than
pm8001_ha->chip->n_phy (depending on the amount of phys of the
expander).
E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the
ports has an expander connected. The expander has 31 phys with phy ids
0-30.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander. Thus, it is wrong to use attached_phy
to index the pm8001_ha->phy array for a device behind an expander.
Thus, we can only clear phy_attached for devices that are directly
attached. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
During mpt3sas_transport_port_remove(), messages were logged with
dev_printk() against &mpt3sas_port->port->dev. At this point the SAS
transport device may already be partially unregistered or freed, leading
to a crash when accessing its struct device.
Using ioc_info(), which logs via the PCI device (ioc->pdev->dev),
guaranteed to remain valid until driver removal.
[83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI
[83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary)
[83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024
[83428.295799] RIP: 0010:__dev_printk+0x1f/0x70
[83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff
[83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206
[83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32
[83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845
[83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8
[83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000
[83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30
[83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000
[83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0
[83428.295844] PKRU: 55555554
[83428.295846] Call Trace:
[83428.295848] <TASK>
[83428.295850] _dev_printk+0x5c/0x80
[83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas]
[83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas]
[83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas]
[83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas]
[83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas]
[83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas]
[83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas]
[83428.295957] pci_device_remove+0x3b/0xb0
[83428.295962] device_release_driver_internal+0x193/0x200
[83428.295968] driver_detach+0x44/0x90
[83428.295971] bus_remove_driver+0x69/0xf0
[83428.295975] pci_unregister_driver+0x2a/0xb0
[83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas]
[83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310
[83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296000] ? __x64_sys_getdents64+0x9a/0x110
[83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296009] ? syscall_trace_enter+0xf6/0x1b0
[83428.296014] do_syscall_64+0x7b/0x2c0
[83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
page_pool: always add GFP_NOWARN for ATOMIC allocations
Driver authors often forget to add GFP_NOWARN for page allocation
from the datapath. This is annoying to users as OOMs are a fact
of life, and we pretty much expect network Rx to hit page allocation
failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations
by default. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix Use-after-free in validation
Nodes stored in the validation duplicates hashtable come from an arena
allocator that is cleared at the end of vmw_execbuf_process. All nodes
are expected to be cleared in vmw_validation_drop_ht but this node escaped
because its resource was destroyed prematurely. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code. |
| In the Linux kernel, the following vulnerability has been resolved:
can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled
This issue is similar to the vulnerability in the `mcp251x` driver,
which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from
sleep before interface was brought up").
In the `hi311x` driver, when the device resumes from sleep, the driver
schedules `priv->restart_work`. However, if the network interface was
not previously enabled, the `priv->wq` (workqueue) is not allocated and
initialized, leading to a null pointer dereference.
To fix this, we move the allocation and initialization of the workqueue
from the `hi3110_open` function to the `hi3110_can_probe` function.
This ensures that the workqueue is properly initialized before it is
used during device resume. And added logic to destroy the workqueue
in the error handling paths of `hi3110_can_probe` and in the
`hi3110_can_remove` function to prevent resource leaks. |
