| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Handling of Values vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX 7000 Series allows a network-based, unauthenticated attacker to cause a Denial-of-Service (DoS).
If a value is configured for DDoS bandwidth or burst parameters for any protocol in
a queue, all protocols which share the same queue will have
their bandwidth or burst value changed to the new value. If, for example, OSPF was configured with a certain bandwidth value, ISIS would also be limited to this value. So inadvertently either the control plane is open for a high level of specific traffic which was supposed to be limited to a lower value, or the limit for a certain protocol is so low that chances to succeed with a volumetric DoS attack are significantly increased.
This issue affects Junos OS Evolved on ACX 7000 Series:
* All versions before 21.4R3-S7-EVO,
* 22.1 versions before 22.1R3-S6-EVO,
* 22.2 versions before 22.2R3-S3-EVO,
* 22.3 versions before 22.3R3-S3-EVO,
* 22.4 versions before 22.4R3-S2-EVO,
* 23.2 versions before 23.2R2-EVO,
* 23.4
versions
before 23.4R1-S1-EVO, 23.4R2-EVO. |
| An Improper Neutralization of Data within XPath Expressions ('XPath Injection') vulnerability in J-Web shipped with Juniper Networks Junos OS allows an unauthenticated, network-based attacker to execute remote commands on the target device.
While an administrator is logged into a J-Web session or has previously logged in and subsequently logged out of their J-Web session, the attacker can arbitrarily execute commands on the target device with the other user's credentials. In the worst case, the attacker will have full control over the device.
This issue affects Junos OS:
* All versions before 21.2R3-S8,
* from 21.4 before 21.4R3-S7,
* from 22.2 before 22.2R3-S4,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S2,
* from 23.2 before 23.2R2,
* from 23.4 before 23.4R1-S1, 23.4R2. |
| Incorrect access control in the /member/orderList API of xmall v1.1 allows attackers to arbitrarily access other users' order details via manipulation of the query parameter userId. |
| During an annual penetration test conducted on behalf of Axis Communication, Truesec discovered a flaw in the ACAP Application framework that allowed applications to access restricted D-Bus methods within the framework.
Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| During an annual penetration test conducted on behalf of Axis Communication, Truesec discovered a flaw in the VAPIX Device Configuration framework that could lead to an incorrect user privilege level in the VAPIX service account D-Bus API. |
| A vulnerability has been identified in TeleControl Server Basic (All versions < V3.1.2.4). Affected application contains a local privilege escalation vulnerability that could allow an attacker to run arbitrary code with elevated privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
In the "pmcmd_ioctl" function, three memory objects allocated by
kmalloc are initialized by "hcall_get_cpu_state", which are then
copied to user space. The initializer is indeed implemented in
"acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of
information leakage due to uninitialized bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: max96712: fix kernel oops when removing module
The following kernel oops is thrown when trying to remove the max96712
module:
Unable to handle kernel paging request at virtual address 00007375746174db
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000
[00007375746174db] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan
snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2
imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev
snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils
max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse
[last unloaded: imx8_isi]
CPU: 0 UID: 0 PID: 754 Comm: rmmod
Tainted: G C 6.12.0-rc6-06364-g327fec852c31 #17
Tainted: [C]=CRAP
Hardware name: NXP i.MX95 19X19 board (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : led_put+0x1c/0x40
lr : v4l2_subdev_put_privacy_led+0x48/0x58
sp : ffff80008699bbb0
x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8
x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000
x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1
x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473
Call trace:
led_put+0x1c/0x40
v4l2_subdev_put_privacy_led+0x48/0x58
v4l2_async_unregister_subdev+0x2c/0x1a4
max96712_remove+0x1c/0x38 [max96712]
i2c_device_remove+0x2c/0x9c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x228
driver_detach+0x4c/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
i2c_del_driver+0x54/0x64
max96712_i2c_driver_exit+0x18/0x1d0 [max96712]
__arm64_sys_delete_module+0x1a4/0x290
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400)
---[ end trace 0000000000000000 ]---
This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata()
is called again and the data is overwritten to point to sd, instead of
priv. So, in remove(), the wrong pointer is passed to
v4l2_async_unregister_subdev(), leading to a crash. |
| Dell Unisphere for PowerMax, version(s) 9.2.4.x, contain(s) an Improper Restriction of XML External Entity Reference vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access to data and resources outside of the intended sphere of control. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: process: Fix kernel gp leakage
childregs represents the registers which are active for the new thread
in user context. For a kernel thread, childregs->gp is never used since
the kernel gp is not touched by switch_to. For a user mode helper, the
gp value can be observed in user space after execve or possibly by other
means.
[From the email thread]
The /* Kernel thread */ comment is somewhat inaccurate in that it is also used
for user_mode_helper threads, which exec a user process, e.g. /sbin/init or
when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have
PF_KTHREAD set and are valid targets for ptrace etc. even before they exec.
childregs is the *user* context during syscall execution and it is observable
from userspace in at least five ways:
1. kernel_execve does not currently clear integer registers, so the starting
register state for PID 1 and other user processes started by the kernel has
sp = user stack, gp = kernel __global_pointer$, all other integer registers
zeroed by the memset in the patch comment.
This is a bug in its own right, but I'm unwilling to bet that it is the only
way to exploit the issue addressed by this patch.
2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread
before it execs, but ptrace requires SIGSTOP to be delivered which can only
happen at user/kernel boundaries.
3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for
user_mode_helpers before the exec completes, but gp is not one of the
registers it returns.
4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel
addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses
are also exposed via PERF_SAMPLE_REGS_USER which is permitted under
LOCKDOWN_PERF. I have not attempted to write exploit code.
5. Much of the tracing infrastructure allows access to user registers. I have
not attempted to determine which forms of tracing allow access to user
registers without already allowing access to kernel registers. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: Fix double free in dvb_register_device()
In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().
Fix this by storing NULL to dvb->entity when it is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: Fix UAF in destroy()
Dm_cache also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.
Therefore, cancelling timer again in destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: max9286: fix kernel oops when removing module
When removing the max9286 module we get a kernel oops:
Unable to handle kernel paging request at virtual address 000000aa00000094
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000880d85000
[000000aa00000094] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in: fsl_jr_uio caam_jr rng_core libdes caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine max9271 authenc crct10dif_ce mxc_jpeg_encdec
CPU: 2 PID: 713 Comm: rmmod Tainted: G C 5.15.5-00057-gaebcd29c8ed7-dirty #5
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : i2c_mux_del_adapters+0x24/0xf0
lr : max9286_remove+0x28/0xd0 [max9286]
sp : ffff800013a9bbf0
x29: ffff800013a9bbf0 x28: ffff00080b6da940 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff000801a5b970 x22: ffff0008048b0890 x21: ffff800009297000
x20: ffff0008048b0f70 x19: 000000aa00000064 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000014 x13: 0000000000000000 x12: ffff000802da49e8
x11: ffff000802051918 x10: ffff000802da4920 x9 : ffff000800030098
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffffffffffffffff x1 : ffff00080b6da940 x0 : 0000000000000000
Call trace:
i2c_mux_del_adapters+0x24/0xf0
max9286_remove+0x28/0xd0 [max9286]
i2c_device_remove+0x40/0x110
__device_release_driver+0x188/0x234
driver_detach+0xc4/0x150
bus_remove_driver+0x60/0xe0
driver_unregister+0x34/0x64
i2c_del_driver+0x58/0xa0
max9286_i2c_driver_exit+0x1c/0x490 [max9286]
__arm64_sys_delete_module+0x194/0x260
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xd4/0xfc
do_el0_svc+0x2c/0x94
el0_svc+0x28/0x80
el0t_64_sync_handler+0xa8/0x130
el0t_64_sync+0x1a0/0x1a4
The Oops happens because the I2C client data does not point to
max9286_priv anymore but to v4l2_subdev. The change happened in
max9286_init() which calls v4l2_i2c_subdev_init() later on...
Besides fixing the max9286_remove() function, remove the call to
i2c_set_clientdata() in max9286_probe(), to avoid confusion, and make
the necessary changes to max9286_init() so that it doesn't have to use
i2c_get_clientdata() in order to fetch the pointer to priv. |
| An improper certificate validation vulnerability has been reported to affect Helpdesk. If exploited, the vulnerability could allow remote attackers to compromise the security of the system.
We have already fixed the vulnerability in the following version:
Helpdesk 3.3.3 and later |
| A path traversal vulnerability has been reported to affect Qfiling. The remote attackers can then exploit the vulnerability to read the contents of unexpected files or system data.
We have already fixed the vulnerability in the following version:
Qfiling 3.13.1 and later |
| An unused function in MicroServer can start a reverse SSH connection to a vendor registered domain, without mutual authentication. An attacker on the local network with admin access to the web server, and the ability to manipulate DNS responses, can redirect the SSH connection to an attacker controlled device. |
| An unused webshell in MicroServer allows unlimited login attempts, with sudo rights on certain files and directories. An attacker with admin access to MicroServer can gain limited shell access, enabling persistence through reverse shells, and the ability to modify or remove data stored in the file system. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.4 before 18.5.5, 18.6 before 18.6.3, and 18.7 before 18.7.1 that could have allowed an authenticated user to access and utilize AI model settings from unauthorized namespaces by manipulating namespace identifiers in API requests. |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A vulnerability was discovered in the IPv6 fragmentation reassembly implementation of RIOT OS v2025.07. When receiving an fragmented IPv6 packet with fragment offset 0 and an empty payload, the payload pointer is set to NULL. However, the implementation still tries to copy the payload into the reassembly buffer, resulting in a NULL pointer dereference which crashes the OS (DoS). To trigger the vulnerability, the `gnrc_ipv6_ext_frag` module must be enabled and the attacker must be able to send arbitrary IPv6 packets to the victim. RIOT OS v2025.10 fixes the issue. |
| Dell PowerFlex appliance versions prior to IC 46.381.00 and IC 46.376.00, Dell PowerFlex rack versions prior to RCM 3.8.1.0 (for RCM 3.8.x train) and prior to RCM 3.7.6.0 (for RCM 3.7.x train), Dell PowerFlex custom node using PowerFlex Manager versions prior to 4.6.1.0, Dell InsightIQ versions prior to 5.1.1, and Dell Data Lakehouse versions prior to 1.2.0.0 contain an Insecure Storage of Sensitive Information vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to information disclosure. The attacker may be able to use information disclosed to gain unauthorized access to pods within the cluster. |
