| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| phpMyFAQ is an open source FAQ web application. Prior to version 4.1.1, an unauthenticated attacker can submit a guest FAQ with an email address that is syntactically valid per RFC 5321 (quoted local part) yet contains raw HTML — for example "<script>alert(1)</script>"@evil.com. PHP's FILTER_VALIDATE_EMAIL accepts this email as valid. The email is stored in the database without HTML sanitization and later rendered in the admin FAQ editor template using Twig's |raw filter, which bypasses auto-escaping entirely. This issue has been patched in version 4.1.1. |
| Suricata is a network IDS, IPS and NSM engine. Prior to version 7.0.15, inefficiency in DCERPC buffering can lead to a performance degradation. This issue has been patched in version 7.0.15. |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 7.0.15 and 8.0.4, flooding of craft HTTP2 continuation frames can lead to memory exhaustion, usually resulting in the Suricata process being shut down by the operating system. This issue has been patched in versions 7.0.15 and 8.0.4. |
| Suricata is a network IDS, IPS and NSM engine. From version 8.0.0 to before version 8.0.4, there is a quadratic complexity issue when searching for URLs in mime encoded messages over SMTP leading to a performance impact. This issue has been patched in version 8.0.4. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: restrict usage in unprivileged domU
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
---
V2:
- defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich)
- wait in open() if target domain isn't known yet
- issue message in case no target domain found (Jan Beulich) |
| A Business Logic vulnerability exists in SourceCodester Loan Management System v1.0 due to improper server-side validation. The application allows administrators to create "Loan Plans" with specific interest rates. While the frontend interface prevents users from entering negative numbers, this constraint is not enforced on the backend. An authenticated attacker can bypass the client-side restriction by manipulating the HTTP POST request to submit a negative value for the interest_percentage. This results in the creation of loan plans with negative interest rates. |
| An arbitrary file overwrite vulnerability in InTouch Contacts & Caller ID APP v6.38.1 allows attackers to overwrite critical internal files via the file import process, leading to arbitrary code execution or information exposure. |
| An arbitrary file overwrite vulnerability in Funambol, Inc. Zefiro Cloud v32.0.2026011614 allows attackers to overwrite critical internal files via the file import process, leading to arbitrary code execution or information exposure. |
| An arbitrary file overwrite vulnerability in Zora: Post, Trade, Earn Crypto v2.60.0 allows attackers to overwrite critical internal files via the file import process, leading to arbitrary code execution or information exposure. |
| An arbitrary file overwrite vulnerability in PEAKSEL D.O.O. NIS Animal Sounds and Ringtones v1.3.0 allows attackers to overwrite critical internal files via the file import process, leading to arbitrary code execution or information exposure. |
| An arbitrary file overwrite vulnerability in Squareapps LLC My Location Travel Timeline v11.80 allows attackers to overwrite critical internal files via the file import process, leading to arbitrary code execution or information exposure. |
| An arbitrary file overwrite vulnerability in FLY is FUN Aviation Navigation v35.33 allows attackers to overwrite critical internal files via the file import process, leading to arbitrary code execution or information exposure. |
| An arbitrary file overwrite vulnerability in PDF Reader App : TA/UTAX Mobile Print v3.7.2.251001 allows attackers to overwrite critical internal files via the file import process, leading to arbitrary code execution or information exposure. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race between freeing data and fs accessing it
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race on rawdata dereference
There is a race condition that leads to a use-after-free situation:
because the rawdata inodes are not refcounted, an attacker can start
open()ing one of the rawdata files, and at the same time remove the
last reference to this rawdata (by removing the corresponding profile,
for example), which frees its struct aa_loaddata; as a result, when
seq_rawdata_open() is reached, i_private is a dangling pointer and
freed memory is accessed.
The rawdata inodes weren't refcounted to avoid a circular refcount and
were supposed to be held by the profile rawdata reference. However
during profile removal there is a window where the vfs and profile
destruction race, resulting in the use after free.
Fix this by moving to a double refcount scheme. Where the profile
refcount on rawdata is used to break the circular dependency. Allowing
for freeing of the rawdata once all inode references to the rawdata
are put. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix double free of ns_name in aa_replace_profiles()
if ns_name is NULL after
1071 error = aa_unpack(udata, &lh, &ns_name);
and if ent->ns_name contains an ns_name in
1089 } else if (ent->ns_name) {
then ns_name is assigned the ent->ns_name
1095 ns_name = ent->ns_name;
however ent->ns_name is freed at
1262 aa_load_ent_free(ent);
and then again when freeing ns_name at
1270 kfree(ns_name);
Fix this by NULLing out ent->ns_name after it is transferred to ns_name
") |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix missing bounds check on DEFAULT table in verify_dfa()
The verify_dfa() function only checks DEFAULT_TABLE bounds when the state
is not differentially encoded.
When the verification loop traverses the differential encoding chain,
it reads k = DEFAULT_TABLE[j] and uses k as an array index without
validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count,
therefore, causes both out-of-bounds reads and writes.
[ 57.179855] ==================================================================
[ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660
[ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993
[ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 57.181563] Call Trace:
[ 57.181572] <TASK>
[ 57.181577] dump_stack_lvl+0x5e/0x80
[ 57.181596] print_report+0xc8/0x270
[ 57.181605] ? verify_dfa+0x59a/0x660
[ 57.181608] kasan_report+0x118/0x150
[ 57.181620] ? verify_dfa+0x59a/0x660
[ 57.181623] verify_dfa+0x59a/0x660
[ 57.181627] aa_dfa_unpack+0x1610/0x1740
[ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470
[ 57.181640] unpack_pdb+0x86d/0x46b0
[ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181656] ? aa_unpack_nameX+0x1a8/0x300
[ 57.181659] aa_unpack+0x20b0/0x4c30
[ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181664] ? stack_depot_save_flags+0x33/0x700
[ 57.181681] ? kasan_save_track+0x4f/0x80
[ 57.181683] ? kasan_save_track+0x3e/0x80
[ 57.181686] ? __kasan_kmalloc+0x93/0xb0
[ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130
[ 57.181697] ? policy_update+0x154/0x330
[ 57.181704] aa_replace_profiles+0x15a/0x1dd0
[ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181712] ? aa_loaddata_alloc+0x77/0x140
[ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181717] ? _copy_from_user+0x2a/0x70
[ 57.181730] policy_update+0x17a/0x330
[ 57.181733] profile_replace+0x153/0x1a0
[ 57.181735] ? rw_verify_area+0x93/0x2d0
[ 57.181740] vfs_write+0x235/0xab0
[ 57.181745] ksys_write+0xb0/0x170
[ 57.181748] do_syscall_64+0x8e/0x660
[ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 57.181765] RIP: 0033:0x7f6192792eb2
Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE
entries unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix side-effect bug in match_char() macro usage
The match_char() macro evaluates its character parameter multiple
times when traversing differential encoding chains. When invoked
with *str++, the string pointer advances on each iteration of the
inner do-while loop, causing the DFA to check different characters
at each iteration and therefore skip input characters.
This results in out-of-bounds reads when the pointer advances past
the input buffer boundary.
[ 94.984676] ==================================================================
[ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760
[ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976
[ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 94.986329] Call Trace:
[ 94.986341] <TASK>
[ 94.986347] dump_stack_lvl+0x5e/0x80
[ 94.986374] print_report+0xc8/0x270
[ 94.986384] ? aa_dfa_match+0x5ae/0x760
[ 94.986388] kasan_report+0x118/0x150
[ 94.986401] ? aa_dfa_match+0x5ae/0x760
[ 94.986405] aa_dfa_match+0x5ae/0x760
[ 94.986408] __aa_path_perm+0x131/0x400
[ 94.986418] aa_path_perm+0x219/0x2f0
[ 94.986424] apparmor_file_open+0x345/0x570
[ 94.986431] security_file_open+0x5c/0x140
[ 94.986442] do_dentry_open+0x2f6/0x1120
[ 94.986450] vfs_open+0x38/0x2b0
[ 94.986453] ? may_open+0x1e2/0x2b0
[ 94.986466] path_openat+0x231b/0x2b30
[ 94.986469] ? __x64_sys_openat+0xf8/0x130
[ 94.986477] do_file_open+0x19d/0x360
[ 94.986487] do_sys_openat2+0x98/0x100
[ 94.986491] __x64_sys_openat+0xf8/0x130
[ 94.986499] do_syscall_64+0x8e/0x660
[ 94.986515] ? count_memcg_events+0x15f/0x3c0
[ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986540] ? handle_mm_fault+0x1639/0x1ef0
[ 94.986551] ? vma_start_read+0xf0/0x320
[ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0
[ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0
[ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986588] ? irqentry_exit+0x3c/0x590
[ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 94.986597] RIP: 0033:0x7fda4a79c3ea
Fix by extracting the character value before invoking match_char,
ensuring single evaluation per outer loop. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: Fix race condition in peer_mep deletion
When a peer MEP is being deleted, cancel_delayed_work_sync() is called
on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in
softirq context under rcu_read_lock (without RTNL) and can re-schedule
ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync()
returning and kfree_rcu() being called.
The following is a simple race scenario:
cpu0 cpu1
mep_delete_implementation()
cancel_delayed_work_sync(ccm_rx_dwork);
br_cfm_frame_rx()
// peer_mep still in hlist
if (peer_mep->ccm_defect)
ccm_rx_timer_start()
queue_delayed_work(ccm_rx_dwork)
hlist_del_rcu(&peer_mep->head);
kfree_rcu(peer_mep, rcu);
ccm_rx_work_expired()
// on freed peer_mep
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync() in both peer MEP deletion paths, so
that subsequent queue_delayed_work() calls from br_cfm_frame_rx()
are silently rejected.
The cc_peer_disable() helper retains cancel_delayed_work_sync()
because it is also used for the CC enable/disable toggle path where
the work must remain re-schedulable. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release flowtable after rcu grace period on error
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks. |
