| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| U-Office Force developed by e-Excellence has a SQL Injection vulnerability, allowing authenticated remote attacker to inject arbitrary SQL commands to read, modify, and delete database contents. |
| A flaw has been found in SourceCodester Survey Application System 1.0. This impacts the function save_user/update_user of the file /LoginRegistration.php. Executing manipulation of the argument fullname can lead to sql injection. The attack may be performed from remote. The exploit has been published and may be used. Other parameters might be affected as well. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that point, the VMA may be concurrently freed, and it
can be recycled by another process. vma_start_read() then increments the
vma->vm_refcnt (if it is in an acceptable range), and if this succeeds,
vma_start_read() can return a recycled VMA.
In this scenario where the VMA has been recycled, lock_vma_under_rcu()
will then detect the mismatching ->vm_mm pointer and drop the VMA through
vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops
the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm.
This is wrong: It implicitly assumes that the caller is keeping the VMA's
mm alive, but in this scenario the caller has no relation to the VMA's mm,
so the rcuwait_wake_up() can cause UAF.
The diagram depicting the race:
T1 T2 T3
== == ==
lock_vma_under_rcu
mas_walk
<VMA gets removed from mm>
mmap
<the same VMA is reallocated>
vma_start_read
__refcount_inc_not_zero_limited_acquire
munmap
__vma_enter_locked
refcount_add_not_zero
vma_end_read
vma_refcount_put
__refcount_dec_and_test
rcuwait_wait_event
<finish operation>
rcuwait_wake_up [UAF]
Note that rcuwait_wait_event() in T3 does not block because refcount was
already dropped by T1. At this point T3 can exit and free the mm causing
UAF in T1.
To avoid this we move vma->vm_mm verification into vma_start_read() and
grab vma->vm_mm to stabilize it before vma_refcount_put() operation.
[surenb@google.com: v3] |
| The U-Office Force from e-Excellence has an Arbitrary File Upload vulnerability, allowing remote attackers with regular privileges to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. |
| OS Command injection vulnerability in function OperateSSH in 1panel 2.0.8 allowing attackers to execute arbitrary commands via the operation parameter to the /api/v2/hosts/ssh/operate endpoint. |
| A use-after-free vulnerability was discovered in Adobe Flash Player before 28.0.0.161. This vulnerability occurs due to a dangling pointer in the Primetime SDK related to media player handling of listener objects. A successful attack can lead to arbitrary code execution. This was exploited in the wild in January and February 2018. |
| Adobe Flash Player versions 29.0.0.171 and earlier have a Stack-based buffer overflow vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc64/ftrace: fix clobbered r15 during livepatching
While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is
not restored in livepatch sequence leading to not so obvious fails
like below:
BUG: Unable to handle kernel data access on write at 0xc0000000000f9078
Faulting instruction address: 0xc0000000018ff958
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790
REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000
CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1
GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488
GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d
GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000
GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070
GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88
GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000
GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078
...
Call Trace:
check_heap_object+0x34/0x390 (unreliable)
__mutex_unlock_slowpath.isra.0+0xe4/0x230
seq_read_iter+0x430/0xa90
proc_reg_read_iter+0xa4/0x200
vfs_read+0x41c/0x510
ksys_read+0xa4/0x190
system_call_exception+0x1d0/0x440
system_call_vectored_common+0x15c/0x2ec
Fix it by restoring r15 always. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out of bounds punch offset
Punching a hole with a start offset that exceeds max_end is not
permitted and will result in a negative length in the
truncate_inode_partial_folio() function while truncating the page cache,
potentially leading to undesirable consequences.
A simple reproducer:
truncate -s 9895604649994 /mnt/foo
xfs_io -c "pwrite 8796093022208 4096" /mnt/foo
xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo
kernel BUG at include/linux/highmem.h:275!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110
RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287
RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000
RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000
RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000
R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005
R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000
FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
truncate_inode_partial_folio+0x3dd/0x620
truncate_inode_pages_range+0x226/0x720
? bdev_getblk+0x52/0x3e0
? ext4_get_group_desc+0x78/0x150
? crc32c_arch+0xfd/0x180
? __ext4_get_inode_loc+0x18c/0x840
? ext4_inode_csum+0x117/0x160
? jbd2_journal_dirty_metadata+0x61/0x390
? __ext4_handle_dirty_metadata+0xa0/0x2b0
? kmem_cache_free+0x90/0x5a0
? jbd2_journal_stop+0x1d5/0x550
? __ext4_journal_stop+0x49/0x100
truncate_pagecache_range+0x50/0x80
ext4_truncate_page_cache_block_range+0x57/0x3a0
ext4_punch_hole+0x1fe/0x670
ext4_fallocate+0x792/0x17d0
? __count_memcg_events+0x175/0x2a0
vfs_fallocate+0x121/0x560
ksys_fallocate+0x51/0xc0
__x64_sys_fallocate+0x24/0x40
x64_sys_call+0x18d2/0x4170
do_syscall_64+0xa7/0x220
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by filtering out cases where the punching start offset exceeds
max_end. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
The CI testing bots triggered the following splat:
[ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80
[ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834
[ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1
[ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.070720200218 07/07/2020
[ 718.223418] Call Trace:
[ 718.227139]
[ 718.230783] dump_stack_lvl+0x33/0x42
[ 718.234431] print_address_description.constprop.9+0x21/0x170
[ 718.238177] ? free_irq_cpu_rmap+0x53/0x80
[ 718.241885] ? free_irq_cpu_rmap+0x53/0x80
[ 718.245539] kasan_report.cold.18+0x7f/0x11b
[ 718.249197] ? free_irq_cpu_rmap+0x53/0x80
[ 718.252852] free_irq_cpu_rmap+0x53/0x80
[ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice]
[ 718.260174] ice_remove_arfs+0x5f/0x70 [ice]
[ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice]
[ 718.267419] ice_rebuild+0x39c/0xb60 [ice]
[ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice]
[ 718.278033] ? delay_tsc+0x4a/0xb0
[ 718.281513] ? preempt_count_sub+0x14/0xc0
[ 718.284984] ? delay_tsc+0x8f/0xb0
[ 718.288463] ice_do_reset+0x92/0xf0 [ice]
[ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice]
[ 718.295561] pci_reset_function+0x53/0x80
<...>
[ 718.393035] Allocated by task 690:
[ 718.433497] Freed by task 20834:
[ 718.495688] Last potentially related work creation:
[ 718.568966] The buggy address belongs to the object at ffff8881bd127e00
which belongs to the cache kmalloc-96 of size 96
[ 718.574085] The buggy address is located 0 bytes inside of
96-byte region [ffff8881bd127e00, ffff8881bd127e60)
[ 718.579265] The buggy address belongs to the page:
[ 718.598905] Memory state around the buggy address:
[ 718.601809] ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.604796] ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
[ 718.607794] >ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.610811] ^
[ 718.613819] ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 718.617107] ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
This is due to that free_irq_cpu_rmap() is always being called
*after* (devm_)free_irq() and thus it tries to work with IRQ descs
already freed. For example, on device reset the driver frees the
rmap right before allocating a new one (the splat above).
Make rmap creation and freeing function symmetrical with
{request,free}_irq() calls i.e. do that on ifup/ifdown instead
of device probe/remove/resume. These operations can be performed
independently from the actual device aRFS configuration.
Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers
only when aRFS is disabled -- otherwise, CPU rmap sets and clears
its own and they must not be touched manually. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix even more out of bound writes from debugfs
CVE-2021-42327 was fixed by:
commit f23750b5b3d98653b31d4469592935ef6364ad67
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date: Wed Oct 13 16:04:13 2021 -0400
drm/amdgpu: fix out of bounds write
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland) |
| A vulnerability was found in WebKit. The flaw is triggered when processing maliciously crafted web content that may lead to arbitrary code execution. Improved memory handling addresses the multiple memory corruption issues. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test (wmfw info)
KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(),
because the source string length was rounded up to the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test (ctl cache)
KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets().
The code uses mock_coeff_template.length_bytes (4 bytes) for register value
allocations. But later, this length is set to 8 bytes which causes
test code failures.
As fix, just remove the lenght override, keeping the original value 4
for all operations. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test
KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(),
because the source string length was rounded up to the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: avoid double free when failing to DMA-map FW msg
The semantics are that caller of fbnic_mbx_map_msg() retains
the ownership of the message on error. All existing callers
dutifully free the page. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a
task") started looking up tasks by PID when deleting a CPU timer.
When a non-leader thread calls execve, it will switch PIDs with the leader
process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find
the task because the timer still points out to the old PID.
That means that armed timers won't be disarmed, that is, they won't be
removed from the timerqueue_list. exit_itimers will still release their
memory, and when that list is later processed, it leads to a
use-after-free.
Clean up the timers from the de-threaded task before freeing them. This
prevents a reported use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
trace_spmi_write_begin() and trace_spmi_read_end() both call
memcpy() with a length of "len + 1". This leads to one extra
byte being read beyond the end of the specified buffer. Fix
this out-of-bound memory access by using a length of "len"
instead.
Here is a KASAN log showing the issue:
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234
Read of size 2 at addr ffffffc0265b7540 by task thermal@2.0-ser/1314
...
Call trace:
dump_backtrace+0x0/0x3e8
show_stack+0x2c/0x3c
dump_stack_lvl+0xdc/0x11c
print_address_description+0x74/0x384
kasan_report+0x188/0x268
kasan_check_range+0x270/0x2b0
memcpy+0x90/0xe8
trace_event_raw_event_spmi_read_end+0x1d0/0x234
spmi_read_cmd+0x294/0x3ac
spmi_ext_register_readl+0x84/0x9c
regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi]
_regmap_raw_read+0x40c/0x754
regmap_raw_read+0x3a0/0x514
regmap_bulk_read+0x418/0x494
adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3]
...
__arm64_sys_read+0x4c/0x60
invoke_syscall+0x80/0x218
el0_svc_common+0xec/0x1c8
...
addr ffffffc0265b7540 is located in stack of task thermal@2.0-ser/1314 at offset 32 in frame:
adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3]
this frame has 1 object:
[32, 33) 'status'
Memory state around the buggy address:
ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00
^
ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
KASAN reports:
[ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
[ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0
[ 4.683454][ T0]
[ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1
[ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016
[ 4.703196][ T0] Call Trace:
[ 4.706334][ T0] <TASK>
[ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
after converting the type of the first argument (@nr, bit number)
of arch_test_bit() from `long` to `unsigned long`[0].
Under certain conditions (for example, when ACPI NUMA is disabled
via command line), pxm_to_node() can return %NUMA_NO_NODE (-1).
It is valid 'magic' number of NUMA node, but not valid bit number
to use in bitops.
node_online() eventually descends to test_bit() without checking
for the input, assuming it's on caller side (which might be good
for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads
to an insane array index when calculating bit position in memory.
For now, add an explicit check for @node being not %NUMA_NO_NODE
before calling test_bit(). The actual logics didn't change here
at all.
[0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d |
| In the Linux kernel, the following vulnerability has been resolved:
dm raid: fix address sanitizer warning in raid_resume
There is a KASAN warning in raid_resume when running the lvm test
lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks
is greater than rs->raid_disks, so the loop touches one entry beyond
the allocated length. |
