| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| BlueKitchen BTstack versions prior to 1.8.1 contain an out-of-bounds read vulnerability in the AVRCP Controller LIST_PLAYER_APPLICATION_SETTING_ATTRIBUTES and LIST_PLAYER_APPLICATION_SETTING_VALUES handlers that allows attackers to read beyond buffer boundaries. A nearby attacker with a paired Bluetooth Classic connection can send a specially crafted VENDOR_DEPENDENT response with an attacker-controlled count value to trigger an out-of-bounds read from the L2CAP receive buffer, potentially causing a crash on resource-constrained devices. |
| A Reflected Cross-Site Scripting (XSS) vulnerability has been identified in DSpace JSPUI 6.5 within the search/discover filtering functionality. The vulnerability exists due to improper sanitization of user-supplied input via the filter_type_1 parameter. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 13.2 before 18.5.5, 18.6 before 18.6.3, and 18.7 before 18.7.1 that could have allowed an authenticated user with access to certain logs to obtain sensitive tokens under specific conditions. |
| Jorani v1.0 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /application/controllers/Users.php. |
| Jorani v1.0 was discovered to contain a cross-site scripting (XSS) vulnerability via the Comment parameter at application/controllers/Leaves.php. |
| Jorani v1.0 was discovered to contain a SQL injection vulnerability via the id parameter at application/controllers/Leaves.php. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the On-Box Anomaly detection framework of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to execute code as root.
The On-Box Anomaly detection framework should only be reachable by other internal processes over the internal routing instance, but not over an externally exposed port. With the ability to access and manipulate the service to execute code as root a remote attacker can take complete control of the device.
Please note that this service is enabled by default as no specific configuration is required.
This issue affects Junos OS Evolved on PTX Series:
* 25.4 versions before 25.4R1-S1-EVO, 25.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 25.4R1-EVO.
This issue does not affect Junos OS. |
| Improper certificate validation in Devolutions Hub Reporting Service
2025.3.1.1 and earlier allows a network attacker to perform a
man-in-the-middle attack via disabled TLS certificate verification. |
| The Performance Library component of Gigabyte Control Center has an Insecure Deserialization vulnerability. Authenticated local attackers can send a malicious serialized payload to the EasyTune Engine service, resulting in privilege escalation. |
| Kargo manages and automates the promotion of software artifacts. In versions 1.4.0 through 1.6.3, 1.7.0-rc.1 through 1.7.8, 1.8.0-rc.1 through 1.8.11, and 1.9.0-rc.1 through 1.9.4, the http and http-download promotion steps allow Server-Side Request Forgery (SSRF) against link-local addresses, most critically the cloud instance metadata endpoint (169.254.169.254), enabling exfiltration of sensitive data such as IAM credentials. These steps provide full control over request headers and methods, rendering cloud provider header-based SSRF mitigations ineffective. An authenticated attacker with permissions to create/update Stages or craft Promotion resources can exploit this by submitting a malicious Promotion manifest, with response data retrievable via Promotion status fields, Git repositories, or a second http step. This issue has been fixed in versions 1.6.4, 1.7.9, 1.8.12 and 1.9.5. |
| lz4_flex is a pure Rust implementation of LZ4 compression/decompression. In versions 0.11.5 and below, and 0.12.0, decompressing invalid LZ4 data can leak sensitive information from uninitialized memory or from previous decompression operations. The library fails to properly validate offset values during LZ4 "match copy operations," allowing out-of-bounds reads from the output buffer. The block-based API functions (`decompress_into`, `decompress_into_with_dict`, and others when `safe-decode` is disabled) are affected, while all frame APIs are unaffected. The impact is potential exposure of sensitive data and secrets through crafted or malformed LZ4 input. This issue has been fixed in versions 0.11.6 and 0.12.1. |
| Gigabyte Control Center developed by GIGABYTE has an Arbitrary File Write vulnerability. When the pairing feature is enabled, unauthenticated remote attackers can write arbitrary files to any location on the underlying operating system, leading to arbitrary code execution or privilege escalation. |
| Buffer overflow in FinalWire Ltd AIDA64 Engineer 6.00.5100 allows attackers to execute arbitrary code by creating a crafted input that will overwrite the SEH handler. |
| Hardcoded Password Vulnerability have been found in CENTUM. Affected products contain a hardcoded password for the user account (PROG) used for CENTUM Authentication Mode within the system. Under the following conditions, there is a risk that an attacker could log in as the PROG user.
The default permission for the PROG users is S1 permission (equivalent to OFFUSER). Therefore, for properly permission-controlled targets of operation and monitoring, even if an attacker user in as the PROG user, the risk of critical operations or configuration changes being performed is considered low. (If the PROG user's permissions have been changed for any reason, there is a risk that operations or configuration changes may be performed under the modified permissions. The CVSS values below are for the default permissions.)
Additionally, exploiting this vulnerability requires an attacker to already have access to the HIS screen controls. Therefore, an attacker can already operate and monitor at that point, regardless of this vulnerability.
The conditions under which this vulnerability is exploited:
If all of the following conditions are met, the affected products are vulnerable to this vulnerability.
-An attacker obtains the hardcoded password using a certain method.
-The HIS with the affected product installed is configured in CTM authentication mode.
-An attacker must have direct access to the aforementioned HIS or be able to break into it remotely using a certain method and perform screen operations.
The affected products and versions are as follows: CENTUM VP R5.01.00 to R5.04.20, R6.01.00 to R6.12.00 and R7.01.00. |
| An integer overflow vulnerability in the HTTP chunked transfer encoding parser in tinyproxy up to and including version 1.11.3 allows an unauthenticated remote attacker to cause a denial of service (DoS). The issue occurs because chunk size values are parsed using strtol() without properly validating overflow conditions (e.g., errno == ERANGE). A crafted chunk size such as 0x7fffffffffffffff (LONG_MAX) bypasses the existing validation check (chunklen < 0), leading to a signed integer overflow during arithmetic operations (chunklen + 2). This results in incorrect size calculations, causing the proxy to attempt reading an extremely large amount of request-body data and holding worker connections open indefinitely. An attacker can exploit this behavior to exhaust all available worker slots, preventing new connections from being accepted and causing complete service unavailability. Upstream addressed this issue in commit bb7edc4; however, the latest stable release (1.11.3) remains affected at the time of publication. |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. When using Heimdall in envoy gRPC decision API mode with versions 0.7.0-alpha through 0.17.10, wrong encoding of the query URL string allows rules with non-wildcard path expressions to be bypassed. Envoy splits the requested URL into parts, and sends the parts individually to Heimdall. Although query and path are present in the API, the query field is documented to be always empty and the URL query is included in the path field. The implementation uses go's url library to reconstruct the url which automatically encodes special characters in the path. As a consequence, a parameter like /mypath?foo=bar to Path is escaped into /mypath%3Ffoo=bar. Subsequently, a rule matching /mypath no longer matches and is bypassed. The issue can only lead to unintended access if Heimdall is configured with an "allow all" default rule. Since v0.16.0, Heimdall enforces secure defaults and refuses to start with such a configuration unless this enforcement is explicitly disabled, e.g. via --insecure-skip-secure-default-rule-enforcement or the broader --insecure flag. This issue has been fixed in version 0.17.11. |
| The SureForms – Contact Form, Payment Form & Other Custom Form Builder plugin for WordPress is vulnerable to Payment Amount Bypass in all versions up to, and including, 2.5.2. This is due to the create_payment_intent() function performing a payment validation solely based on the value of a user-controlled parameter. This makes it possible for unauthenticated attackers to bypass configured form payment-amount validation and create underpriced payment/subscription intents by setting form_id to 0. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0.3, a stored cross-site scripting vulnerability in the CCDA document preview allows an attacker who can upload or send a CCDA document to execute arbitrary JavaScript in a clinician's browser session when the document is previewed. The XSL stylesheet sanitizes attributes for all other narrative elements but not for `linkHtml`, allowing `href="javascript:..."` and event handler attributes to pass through unchanged. Version 8.0.0.3 patches the issue. |
| A weakness has been identified in Orc discount up to 3.0.1.2. This issue affects the function compile of the file markdown.c of the component Markdown Handler. This manipulation causes uncontrolled recursion. The attack is restricted to local execution. The exploit has been made available to the public and could be used for attacks. The project maintainer confirms: "[I]f you feed it an infinitely deep blockquote input it will crash. (...) [T]his is a duplicate of an old bug that I've been working on." |
| The Download Monitor plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.7 via the executePayment() function due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to complete arbitrary pending orders by exploiting a mismatch between the PayPal transaction token and the local order, allowing theft of paid digital goods by paying a minimal amount for a low-cost item and using that payment token to finalize a high-value order. |
