| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Arcane provides modern docker management. Prior to 1.13.0, Arcane has a command injection in the updater service. Arcane’s updater service supported lifecycle labels com.getarcaneapp.arcane.lifecycle.pre-update and com.getarcaneapp.arcane.lifecycle.post-update that allowed defining a command to run before or after a container update. The label value is passed directly to /bin/sh -c without sanitization or validation. Because any authenticated user (not limited to administrators) can create projects through the API, an attacker can create a project that specifies one of these lifecycle labels with a malicious command. When an administrator later triggers a container update (either manually or via scheduled update checks), Arcane reads the lifecycle label and executes its value as a shell command inside the container. This vulnerability is fixed in 1.13.0. |
| RustCrypto CMOV provides conditional move CPU intrinsics which are guaranteed on major platforms to execute in constant-time and not be rewritten as branches by the compiler. Prior to 0.4.4, the thumbv6m-none-eabi (Cortex M0, M0+ and M1) compiler emits non-constant time assembly when using cmovnz (portable version). This vulnerability is fixed in 0.4.4. |
| ZITADEL is an open source identity management platform. Prior to 4.9.1 and 3.4.6, a user enumeration vulnerability has been discovered in Zitadel's login interfaces. An unauthenticated attacker can exploit this flaw to confirm the existence of valid user accounts by iterating through usernames and userIDs. This vulnerability is fixed in 4.9.1 and 3.4.6. |
| Docmost is an open-source collaborative wiki and documentation software. From 0.21.0 to before 0.24.0, Docmost is vulnerable to Arbitrary File Write via Zip Import Feature (ZipSlip). In apps/server/src/integrations/import/utils/file.utils.ts, there are no validation on filename. This vulnerability is fixed in 0.24.0. |
| BullWall Server Intrusion Protection (SIP) services are initialized after login services during system startup. A local, authenticated attacker can log in after boot and before SIP MFA is running. The SIP services do not retroactively enforce MFA or disconnect sessions that were not subject to SIP MFA. Versions 4.6.0.0, 4.6.0.6, 4.6.0.7, and 4.6.1.4 are affected. Other versions mayy also be affected. BullWall plans to improve detection method documentation. |
| BullWall Server Intrusion Protection has a noticeable configuration-dependent delay before the MFA check for RDP connections. A remote, authenticated attacker can potentially bypass detection during this delay. Versions 4.6.0.0, 4.6.0.6, 4.6.0.7, and 4.6.1.4 are affected. Other versions may also be affected. |
| BullWall Ransomware Containment considers the number of files modified to trigger detection. An authenticated attacker could encrypt a single (possibly large) file without triggering detection if thresholds are configured to require multiple file changes. The number of files to trigger detection can be configured by the user. Versions 4.6.0.0, 4.6.0.6, 4.6.0.7, and 4.6.1.4 are affected. Other versions may also be affected. |
| BullWall Ransomware Containment supports configurable file and directory exclusions such as '$RECYCLE.BIN' to balance monitoring scope and performance. Certain exclusion patterns could allow an authenticated attacker to rename directories in a way that avoids monitoring. Fixed in 4.6.1.14 and 5.0.0.42, which remove hardcoded exclusion behavior and exposes exclusion handling as configurable settings. |
| Entrust Instant Financial Issuance (IFI) On Premise software (formerly referred to as CardWizard) versions 5.x, prior to 6.10.5, and prior to 6.11.1 contain an insecure .NET Remoting exposure in the Legacy Remoting Service that is enabled by default. The service registers a TCP remoting channel with SOAP and binary formatters configured at TypeFilterLevel=Full and exposes default ObjectURI endpoints such as logfile.rem, photo.rem, cwPhoto.rem, and reports.rem on a network-reachable remoting port. A remote, unauthenticated attacker who can reach the remoting port can invoke exposed remoting objects to read arbitrary files from the server and coerce outbound authentication, and may achieve arbitrary file write and remote code execution via known .NET Remoting exploitation techniques. This can lead to disclosure of sensitive installation and service-account data and compromise of the affected host. |
| An issue in nanomq v0.22.7 allows attackers to cause a Denial of Service (DoS) via a crafted request. The number of data packets received in the recv-q queue of the Nanomq process continues to increase, causing the nanomq broker to fall into a deadlock and be unable to provide normal services. |
| Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer.
This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring:
[ protocols bgp ... disable-4byte-as ]
Established BGP sessions can be checked by executing:
show bgp neighbor <IP address> | match "4 byte AS"
This issue affects:
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* 23.2 versions before 23.2R2-S5-EVO,
* 23.4 versions before 23.4R2-S6-EVO,
* 24.2 versions before 24.2R2-S2-EVO,
* 24.4 versions before 24.4R2-EVO. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged user to write to the Unix socket used to manage the jdhcpd process, resulting in complete control over the resource.
This vulnerability allows any low-privileged user logged into the system to connect to the Unix socket and issue commands to manage the DHCP service, in essence, taking administrative control of the local DHCP server or DHCP relay.
This issue affects:
Junos OS:
* all versions before 21.2R3-S10,
* all versions of 22.2,
* from 21.4 before 21.4R3-S12,
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S2,
* from 24.4 before 24.4R2,
* from 25.2 before 25.2R1-S1, 25.2R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* from 23.2 before 23.2R2-S5-EVO,
* from 23.4 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-S2-EVO,
* from 24.4 before 24.4R2-EVO,
* from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Juniper DHCP service (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a DHCP client in one subnet to exhaust the address pools of other subnets, leading to a Denial of Service (DoS) on the downstream DHCP server.
By default, the DHCP relay agent inserts its own Option 82 information when forwarding client requests, optionally replacing any Option 82 information provided by the client. When a specific DHCP DISCOVER is received in 'forward-only' mode with Option 82, the device should drop the message unless 'trust-option82' is configured. Instead, the DHCP relay forwards these packets to the DHCP server unmodified, which uses up addresses in the DHCP server's address pool, ultimately leading to address pool exhaustion.
This issue affects Junos OS:
* all versions before 21.2R3-S10,
* from 21.4 before 21.4R3-S12,
* all versions of 22.2,
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S2,
* from 24.4 before 24.4R2,
* from 25.2 before 25.2R1-S1, 25.2R2.
Junos OS Evolved:
* all versions before 21.4R3-S12-EVO,
* all versions of 22.2-EVO,
* from 22.4 before 22.4R3-S8-EVO,
* from 23.2 before 23.2R2-S5-EVO,
* from 23.4 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-S2-EVO,
* from 24.4 before 24.4R2-EVO,
* from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO. |
| An Untrusted Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with low privileges to cause a Denial-of-Service (DoS).
When the command 'show route < ( receive-protocol | advertising-protocol ) bgp > detail' is executed, and at least one of the routes in the intended output has specific attributes, this will cause an rpd crash and restart.
'show route ... extensive' is not affected.
This issue affects:
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S5,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* 23.2 versions before 23.2R2-S5-EVO,
* 23.4 versions before 23.4R2-S6-EVO,
* 24.2 versions before 24.2R2-S2-EVO,
* 24.4 versions before 24.4R2-EVO. |
| A clickjacking vulnerability exists in the web portal of Juniper Networks Paragon Automation (Pathfinder, Planner, Insights) due to the application's failure to set appropriate X-Frame-Options and X-Content-Type HTTP headers. This vulnerability allows an attacker to trick users into interacting with the interface under the attacker's control.
This issue affects all versions of Paragon Automation (Pathfinder, Planner, Insights) before 24.1.1. |
| BuhoNTFS contains an insecure XPC service that allows local, unprivileged users to escalate their privileges to root via insecure functions.This issue affects BuhoNTFS: 1.3.2. |
| FS Inc S3150-8T2F 8-Port Gigabit Ethernet L2+ Switch, 8 x Gigabit RJ45, with 2 x 1Gb SFP, Fanless. All versions before 2.2.0D Build 135103 were discovered to transmit cookies for their web based administrative application containing usernames and passwords. These were transmitted in cleartext using simple base64 encoding during every POST request made to the server. |
| SparkyFitness v0.15.8.2 is vulnerable to Cross Site Scripting (XSS) via user input and LLM output. |
| The Testimonials Creator plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in version 1.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
