| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: reserve mac_len headroom when recompressed SRH grows
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix slab-use-after-free in qd_put
Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: fix partition descriptor append bookkeeping
Mounting a crafted UDF image with repeated partition descriptors can
trigger a heap out-of-bounds write in part_descs_loc[].
handle_partition_descriptor() deduplicates entries by partition number,
but appended slots never record partnum. As a result duplicate
Partition Descriptors are appended repeatedly and num_part_descs keeps
growing.
Once the table is full, the growth path still sizes the allocation from
partnum even though inserts are indexed by num_part_descs. If partnum is
already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep
the old capacity and the next append writes past the end of the table.
Store partnum in the appended slot and size growth from the next append
count so deduplication and capacity tracking follow the same model. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()
Some crafted images can have illegal (!partial_decoding &&
m_llen < m_plen) extents, and the LZ4 inplace decompression path
can be wrongly hit, but it cannot handle (outpages < inpages)
properly: "outpages - inpages" wraps to a large value and
the subsequent rq->out[] access reads past the decompressed_pages
array.
However, such crafted cases can correctly result in a corruption
report in the normal LZ4 non-inplace path.
Let's add an additional check to fix this for backporting.
Reproducible image (base64-encoded gzipped blob):
H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g
dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i
PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz
2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w
ywAAAAAAAADwu14ATsEYtgBQAAA=
$ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt
$ dd if=/mnt/data of=/dev/null bs=4096 count=1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix error handling in rxgk_extract_token()
Fix a missing bit of error handling in rxgk_extract_token(): in the event
that rxgk_decrypt_skb() returns -ENOMEM, it should just return that rather
than continuing on (for anything else, it generates an abort). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix integer overflow in run_unpack() volume boundary check
The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw
addition which can wrap around for large lcn and len values, bypassing
the validation. Use check_add_overflow() as is already done for the
adjacent prev_lcn + dlcn and vcn64 + len checks added by commit
3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()").
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters
scx_group_set_{weight,idle,bandwidth}() cache scx_root before acquiring
scx_cgroup_ops_rwsem, so the pointer can be stale by the time the op runs.
If the loaded scheduler is disabled and freed (via RCU work) and another is
enabled between the naked load and the rwsem acquire, the reader sees
scx_cgroup_enabled=true (the new scheduler's) but dereferences the freed one
- UAF on SCX_HAS_OP(sch, ...) / SCX_CALL_OP(sch, ...).
scx_cgroup_enabled is toggled only under scx_cgroup_ops_rwsem write
(scx_cgroup_{init,exit}), so reading scx_root inside the rwsem read section
correlates @sch with the enabled snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg
Check bounds against the end of the BO whenever we access the msg. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: playstation: Clamp num_touch_reports
A device would never lie about the number of touch reports would it?
If it does the loop in dualshock4_parse_report will read off the end of
the touch_reports array, up to about 2 KiB for the maximum number of 256
loop iteraions. The data that is read is emitted via evdev if the
DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by
clamping the num_touch_reports value provided by the device to the
maximum size of the touch_reports array. |
| A security vulnerability has been detected in TRENDnet TEW-432BRP 3.10B20. Impacted is the function formSetMACFilter of the file /goform/formSetMACFilter. The manipulation of the argument filter_name leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Use waiter::task instead of current in remove_waiter()
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: propagate shared-frag marker through frag-transfer helpers
Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail
to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when
moving frags from source to destination. __pskb_copy_fclone() defers
the rest of the shinfo metadata to skb_copy_header() after copying
frag descriptors, but that helper only carries over gso_{size,segs,
type} and never touches skb_shinfo()->flags; skb_shift() moves frag
descriptors directly and leaves flags untouched. As a result, the
destination skb keeps a reference to the same externally-owned or
page-cache-backed pages while reporting skb_has_shared_frag() as
false.
The mismatch is harmful in any in-place writer that uses
skb_has_shared_frag() to decide whether shared pages must be detoured
through skb_cow_data(). ESP input is one such writer (esp4.c,
esp6.c), and a single nft 'dup to <local>' rule -- or any other
nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d
skb in esp_input() with the marker stripped, letting an unprivileged
user write into the page cache of a root-owned read-only file via
authencesn-ESN stray writes.
Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors
were actually moved from the source. skb_copy() and skb_copy_expand()
share skb_copy_header() too but linearize all paged data into freshly
allocated head storage and emerge with nr_frags == 0, so
skb_has_shared_frag() returns false on its own; they need no change.
The same omission exists in skb_gro_receive() and skb_gro_receive_list().
The former moves the incoming skb's frag descriptors into the
accumulator's last sub-skb via two paths (a direct frag-move loop and
the head_frag + memcpy path); the latter chains the incoming skb whole
onto p's frag_list. Downstream skb_segment() reads only
skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's
shinfo as the nskb -- both p and lp must carry the marker.
The same omission also exists in tcp_clone_payload(), which builds an
MTU probe skb by moving frag descriptors from skbs on sk_write_queue
into a freshly allocated nskb. The helper falls into the same family
and warrants the same fix for consistency; no TCP TX-side in-place
writer is currently known to reach a user page through this gap, but
a future consumer depending on the marker would regress silently.
The same omission exists in skb_segment(): the per-iteration flag
merge takes only head_skb's flag, and the inner switch that rebinds
frag_skb to list_skb on head_skb-frags exhaustion does not fold the
new frag_skb's flag into nskb. Fold frag_skb's flag at both sites
so segments drawing frags from frag_list members carry the marker. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
The address watch clear code receives watch_id as an unsigned value
(u32), but some helper functions were using a signed int and checked
bits by shifting with watch_id.
If a very large watch_id is passed from userspace, it can be converted
to a negative value. This can cause invalid shifts and may access
memory outside the watch_points array.
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before
using it. Also use BIT(watch_id) to test and clear bits safely.
This keeps the behavior unchanged for valid watch IDs and avoids
undefined behavior for invalid ones.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448
kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow
'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c
433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd,
434 uint32_t watch_id)
435 {
436 int r;
437
438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))
kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if
watch_id is larger than INT_MAX it leads to a buffer overflow.
(Negative shifts are undefined).
439 return -EINVAL;
440
441 if (!pdd->dev->kfd->shared_resources.enable_mes) {
442 r = debug_lock_and_unmap(pdd->dev->dqm);
443 if (r)
444 return r;
445 }
446
447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);
--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch(
449 pdd->dev->adev,
450 watch_id);
v2: (as per, Jonathan Kim)
- Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to
match the clear path.
- Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). |
| A weakness has been identified in Open5GS up to 2.7.7. This issue affects the function ogs_pool_id_calloc in the library /lib/sbi/nghttp2-server.c. Executing a manipulation can lead to denial of service. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. It is best practice to apply a patch to resolve this issue. |
| A security flaw has been discovered in Open5GS up to 2.7.7. This vulnerability affects the function ogs_sbi_xact_add in the library /lib/core/ogs-timer.c of the component ue-authentications Endpoint. Performing a manipulation results in denial of service. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. Applying a patch is the recommended action to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Fix use-after-free in iris_release_internal_buffers()
The recent change in commit 1dabf00ee206 ("media: iris: gen1: Destroy
internal buffers after FW releases") introduced a regression where
session_release_buf() may free the buffer. The caller,
iris_release_internal_buffers(), continued to access `buffer` after the
call, leading to a potential use-after-free.
Fix this by setting BUF_ATTR_PENDING_RELEASE before calling
session_release_buf(), and reverting the flag if the call fails. This
ensures no dereference occurs after potential freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop caching unowned originator pointers in BAT IV
BAT IV keeps the last-hop neighbor address in each neigh_node, but some
paths also cache an originator pointer derived from a temporary lookup.
That pointer is not owned by the neigh_node and may no longer refer to a
live originator entry after purge handling runs.
Stop storing the auxiliary originator pointer in the BAT IV neighbor
state. When BAT IV needs the neighbor originator data, resolve it from
the stored neighbor address and drop the reference again after use.
[sven: avoid bonding logic for outgoing OGM] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn3: Avoid overflow on msg bound check
As pointed out by SDL, the previous condition may be vulnerable to
overflow.
(cherry picked from commit db00257ac9e4a51eb2515aaea161a019f7125e10) |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL
The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with
list_for_each_entry_safe(), which caches the next entry in @tmp before
the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may
drop the socket lock inside sctp_wait_for_sndbuf().
While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the
association cached in @tmp, migrating it to a new endpoint via
sctp_sock_migrate() (list_del_init() + list_add_tail() to
newep->asocs), and optionally close the new socket which frees the
association via kfree_rcu(). The cached @tmp can also be freed by a
network ABORT for that association, processed in softirq while the
lock is dropped.
sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock
via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing
revalidates @tmp. After a successful return, the iterator advances to
the stale @tmp, yielding either a use-after-free (if the peeled socket
was closed) or a list-walk onto the new endpoint's list head (type
confusion of &newep->asocs as a struct sctp_association *).
Both are reachable from CapEff=0; the type-confusion path gives
controlled indirect call via the outqueue.sched->init_sid pointer.
Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc()
returns. @asoc is known to still be on ep->asocs at that point: the
only callers that list_del an association from ep->asocs are
sctp_association_free() (which sets asoc->base.dead) and
sctp_assoc_migrate() (which changes asoc->base.sk), and
sctp_wait_for_sndbuf() checks both under the lock before any
successful return; a tripped check propagates as err < 0 and the loop
bails before the re-derive.
The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the
loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so
the @tmp cached by list_for_each_entry_safe() still covers the
lock-held free that ba59fb027307 ("sctp: walk the list of asoc
safely") was added for. |
