| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate()
hci_le_big_terminate() allocates iso_list_data via kzalloc_obj but
returns 0 without freeing it when neither pa_sync_term nor big_sync_term
flags are set after evaluating the PA and BIG sync connection state.
This early-return path was introduced when hci_le_big_terminate() was
refactored to take struct hci_conn instead of raw u8 parameters, adding
PA/BIG flag evaluation logic. The existing kfree() on hci_cmd_sync_queue
failure does not cover this path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix ld_{abs,ind} failure path analysis in subprogs
Usage of ld_{abs,ind} instructions got extended into subprogs some time
ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These
are only allowed in subprograms when the latter are BTF annotated and
have scalar return types.
The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 +
exit) from legacy cBPF times. While the enforcement is on scalar return
types, the verifier must also simulate the path of abnormal exit if the
packet data load via ld_{abs,ind} failed.
This is currently not the case. Fix it by having the verifier simulate
both success and failure paths, and extend it in similar ways as we do
for tail calls. The success path (r0=unknown, continue to next insn) is
pushed onto stack for later validation and the r0=0 and return to the
caller is done on the fall-through side. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops
When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,
the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the
destination register in the !fullsock / !locked_tcp_sock path.
Both macros borrow a temporary register to check is_fullsock /
is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the
ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with
a request_sock), dst_reg should be zeroed but is not, leaving the stale
ctx pointer:
- SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks
as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer,
leading to stack-out-of-bounds access in helpers like
bpf_skc_to_tcp6_sock().
- SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the
verifier believes is a SCALAR_VALUE, leaking a kernel pointer.
Fix both macros by:
- Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the
added instruction.
- Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register
restore in the !fullsock path, placed after the restore because
dst_reg == src_reg means we need src_reg intact to read ctx->temp. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity-fec: fix reading parity bytes split across blocks (take 3)
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: revert commit_mutex usage in reset path
It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset
and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set'
rule run at the same time.
Previous patches made it safe to run individual reset handlers concurrently
so commit_mutex is no longer required to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix delayed allocation of a cell's anonymous key
The allocation of a cell's anonymous key is done in a background thread
along with other cell setup such as doing a DNS upcall. In the reported
bug, this is triggered by afs_parse_source() parsing the device name given
to mount() and calling afs_lookup_cell() with the name of the cell.
The normal key lookup then tries to use the key description on the
anonymous authentication key as the reference for request_key() - but it
may not yet be set and so an oops can happen.
This has been made more likely to happen by the fix for dynamic lookup
failure.
Fix this by firstly allocating a reference name and attaching it to the
afs_cell record when the record is created. It can share the memory
allocation with the cell name (unfortunately it can't just overlap the cell
name by prepending it with "afs@" as the cell name already has a '.'
prepended for other purposes). This reference name is then passed to
request_key().
Secondly, the anon key is now allocated on demand at the point a key is
requested in afs_request_key() if it is not already allocated. A mutex is
used to prevent multiple allocation for a cell.
Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't
yet allocated (if we need it) and then the caller can return -ECHILD to
drop out of RCU-mode and afs_request_key() can be called.
Note that the anonymous key is kind of necessary to make the key lookup
cache work as that doesn't currently cache a negative lookup, but it's
probably worth some investigation to see if NULL can be used instead. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: validate cluster allocation bits of the allocation bitmap
syzbot created an exfat image with cluster bits not set for the allocation
bitmap. exfat-fs reads and uses the allocation bitmap without checking
this. The problem is that if the start cluster of the allocation bitmap
is 6, cluster 6 can be allocated when creating a directory with mkdir.
exfat zeros out this cluster in exfat_mkdir, which can delete existing
entries. This can reallocate the allocated entries. In addition,
the allocation bitmap is also zeroed out, so cluster 6 can be reallocated.
This patch adds exfat_test_bitmap_range to validate that clusters used for
the allocation bitmap are correctly marked as in-use. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_get_acpi_mute_state()
Return value of a function acpi_evaluate_dsm() is dereferenced without
checking for NULL, but it is usually checked for this function.
acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns
acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: remove read access to debugfs files
The 'command' and 'netdev_ops' debugfs files are a legacy debugging
interface supported by the i40e driver since its early days by commit
02e9c290814c ("i40e: debugfs interface").
Both of these debugfs files provide a read handler which is mostly useless,
and which is implemented with questionable logic. They both use a static
256 byte buffer which is initialized to the empty string. In the case of
the 'command' file this buffer is literally never used and simply wastes
space. In the case of the 'netdev_ops' file, the last command written is
saved here.
On read, the files contents are presented as the name of the device
followed by a colon and then the contents of their respective static
buffer. For 'command' this will always be "<device>: ". For 'netdev_ops',
this will be "<device>: <last command written>". But note the buffer is
shared between all devices operated by this module. At best, it is mostly
meaningless information, and at worse it could be accessed simultaneously
as there doesn't appear to be any locking mechanism.
We have also recently received multiple reports for both read functions
about their use of snprintf and potential overflow that could result in
reading arbitrary kernel memory. For the 'command' file, this is definitely
impossible, since the static buffer is always zero and never written to.
For the 'netdev_ops' file, it does appear to be possible, if the user
carefully crafts the command input, it will be copied into the buffer,
which could be large enough to cause snprintf to truncate, which then
causes the copy_to_user to read beyond the length of the buffer allocated
by kzalloc.
A minimal fix would be to replace snprintf() with scnprintf() which would
cap the return to the number of bytes written, preventing an overflow. A
more involved fix would be to drop the mostly useless static buffers,
saving 512 bytes and modifying the read functions to stop needing those as
input.
Instead, lets just completely drop the read access to these files. These
are debug interfaces exposed as part of debugfs, and I don't believe that
dropping read access will break any script, as the provided output is
pretty useless. You can find the netdev name through other more standard
interfaces, and the 'netdev_ops' interface can easily result in garbage if
you issue simultaneous writes to multiple devices at once.
In order to properly remove the i40e_dbg_netdev_ops_buf, we need to
refactor its write function to avoid using the static buffer. Instead, use
the same logic as the i40e_dbg_command_write, with an allocated buffer.
Update the code to use this instead of the static buffer, and ensure we
free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on
multiple devices, and allows us to remove the now unused static buffer
along with removing the read access. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8195: Set ETDM1/2 IN/OUT to COMP_DUMMY()
ETDM2_IN_BE and ETDM1_OUT_BE are defined as COMP_EMPTY(),
in the case the codec dai_name will be null.
Avoid a crash if the device tree is not assigning a codec
to these links.
[ 1.179936] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 1.181065] Mem abort info:
[ 1.181420] ESR = 0x0000000096000004
[ 1.181892] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.182576] SET = 0, FnV = 0
[ 1.182964] EA = 0, S1PTW = 0
[ 1.183367] FSC = 0x04: level 0 translation fault
[ 1.183983] Data abort info:
[ 1.184406] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1.185097] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1.185766] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1.186439] [0000000000000000] user address but active_mm is swapper
[ 1.187239] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 1.188029] Modules linked in:
[ 1.188420] CPU: 7 UID: 0 PID: 70 Comm: kworker/u32:1 Not tainted 6.14.0-rc4-next-20250226+ #85
[ 1.189515] Hardware name: Radxa NIO 12L (DT)
[ 1.190065] Workqueue: events_unbound deferred_probe_work_func
[ 1.190808] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.191683] pc : __pi_strcmp+0x24/0x140
[ 1.192170] lr : mt8195_mt6359_soc_card_probe+0x224/0x7b0
[ 1.192854] sp : ffff800083473970
[ 1.193271] x29: ffff800083473a10 x28: 0000000000001008 x27: 0000000000000002
[ 1.194168] x26: ffff800082408960 x25: ffff800082417db0 x24: ffff800082417d88
[ 1.195065] x23: 000000000000001e x22: ffff800082dbf480 x21: ffff800082dc07b8
[ 1.195961] x20: 0000000000000000 x19: 0000000000000013 x18: 00000000ffffffff
[ 1.196858] x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000006
[ 1.197755] x14: ffff800082407af0 x13: 6e6f69737265766e x12: 692d6b636f6c6374
[ 1.198651] x11: 0000000000000002 x10: ffff80008240b920 x9 : 0000000000000018
[ 1.199547] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000
[ 1.200443] x5 : 0000000000000000 x4 : 8080808080000000 x3 : 303933383978616d
[ 1.201339] x2 : 0000000000000000 x1 : ffff80008240b920 x0 : 0000000000000000
[ 1.202236] Call trace:
[ 1.202545] __pi_strcmp+0x24/0x140 (P)
[ 1.203029] mtk_soundcard_common_probe+0x3bc/0x5b8
[ 1.203644] platform_probe+0x70/0xe8
[ 1.204106] really_probe+0xc8/0x3a0
[ 1.204556] __driver_probe_device+0x84/0x160
[ 1.205104] driver_probe_device+0x44/0x130
[ 1.205630] __device_attach_driver+0xc4/0x170
[ 1.206189] bus_for_each_drv+0x8c/0xf8
[ 1.206672] __device_attach+0xa8/0x1c8
[ 1.207155] device_initial_probe+0x1c/0x30
[ 1.207681] bus_probe_device+0xb0/0xc0
[ 1.208165] deferred_probe_work_func+0xa4/0x100
[ 1.208747] process_one_work+0x158/0x3e0
[ 1.209254] worker_thread+0x2c4/0x3e8
[ 1.209727] kthread+0x134/0x1f0
[ 1.210136] ret_from_fork+0x10/0x20
[ 1.210589] Code: 54000401 b50002c6 d503201f f86a6803 (f8408402)
[ 1.211355] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space. |
| A flaw was found in GStreamer's WavPack audio decoder in gst-plugins-good. When processing a specially crafted WavPack file, an integer overflow in the buffer size calculation (4 * block_samples * channels) in gst_wavpack_dec_handle_frame() causes a very small heap allocation. The WavPack library then writes decoded audio samples far beyond the allocated buffer, resulting in heap memory corruption. This affects both 32-bit and 64-bit systems since the arithmetic is performed in 32-bit integers before promotion to the allocation size type. A remote attacker could use this flaw to crash an application or potentially execute arbitrary code by convincing a user to open a malicious WavPack audio file. |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. |
| The King Addons for Elementor WordPress plugin before 51.1.76 does not escape a user-supplied grid setting before reflecting it into an HTML attribute in an unauthenticated AJAX response, allowing attackers to execute arbitrary JavaScript in the browser of a visitor who is tricked into loading a crafted page. |
| The FluentBoards WordPress plugin before 1.95.3 does not verify that the items selected for a board import operation belong to a board the requesting user is authorized to access, allowing any authenticated user with member access to a single board to copy and read the stages and tasks (including titles, descriptions and file attachments) of any other board on the site. |
| The SMS Alert WordPress plugin before 3.9.8 does not bind its "mobile verified" session flag to the phone number that was actually verified: after an attacker verifies an OTP sent to their own phone, the signup/login handler reads a fresh, attacker-supplied phone number to select the account and logs them in. An unauthenticated attacker can therefore log in as any user, including an administrator, who has a billing phone on file. |
| The AI ChatBot for WooCommerce WordPress plugin before 4.8.4 does not perform any authorization or nonce check on one of its AJAX actions, allowing unauthenticated users to abuse the site owner's stored third-party API key to send requests billed to the owner's account and, when an optional feature is enabled, to retrieve indexed knowledge-base content. |
| The Meta Box WordPress plugin before 5.13.1 does not verify that a user is authorized to delete the supplied attachment before deleting it, allowing users with a low-privilege role such as Contributor to permanently delete arbitrary media attachments belonging to other users. |
| The RT Mega Menu WordPress plugin before 1.5.2 does not perform a capability check on the AJAX action that saves mega-menu configuration and per-menu-item settings; its only gate is a nonce that any logged-in user can read from a standard admin page. A subscriber-level user can therefore enable the mega menu on a site menu and store a menu-item style value that is rendered, without output escaping, into a style attribute on the public navigation. By breaking out of that attribute the user persists a JavaScript event handler that executes for every visitor who hovers the navigation, including administrators, leading to session/site takeover. |
