| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper session management in D-Link Wireless N 300 ADSL2+ Modem Router DSL-124 ME_1.00 allows attackers to execute a session hijacking attack via spoofing the IP address of an authenticated user. |
| An arbitrary file upload vulnerability in the subtitle loading function of asbplayer v1.13.0 allows attackers to execute arbitrary code via uploading a crafted subtitle file. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in vanquish User Extra Fields wp-user-extra-fields allows Path Traversal.This issue affects User Extra Fields: from n/a through <= 17.0. |
| Missing Authorization vulnerability in staviravn AIO WP Builder all-in-one-wp-builder allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects AIO WP Builder: from n/a through <= 2.0.2. |
| ZenTaoPMS v18.11 through v21.6.beta is vulnerable to Directory Traversal in /module/ai/control.php. This allows attackers to execute arbitrary code via a crafted file upload |
| A vulnerability was found in Rongzhitong Visual Integrated Command and Dispatch Platform up to 20260206. This affects an unknown function of the file /dm/dispatch/user/add of the component User Handler. The manipulation results in improper access controls. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix gmap_helper_zap_one_page() again
A few checks were missing in gmap_helper_zap_one_page(), which can lead
to memory corruption in the guest under specific circumstances.
Add the missing checks. |
| A vulnerability was determined in Rongzhitong Visual Integrated Command and Dispatch Platform up to 20260206. This impacts an unknown function of the file /dm/dispatch/user/delete of the component User Handler. This manipulation of the argument ID causes improper access controls. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix memory leak on usb_submit_urb() failure
In async_set_registers(), when usb_submit_urb() fails, the allocated
async_req structure and URB are not freed, causing a memory leak.
The completion callback async_set_reg_cb() is responsible for freeing
these allocations, but it is only called after the URB is successfully
submitted and completes (successfully or with error). If submission
fails, the callback never runs and the memory is leaked.
Fix this by freeing both the URB and the request structure in the error
path when usb_submit_urb() fails. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.23.0, a malicious RDP server can trigger a heap buffer overflow in FreeRDP clients using the GDI surface pipeline (e.g., `xfreerdp`) by sending an RDPGFX ClearCodec surface command with an out-of-bounds destination rectangle. The `gdi_SurfaceCommand_ClearCodec()` handler does not call `is_within_surface()` to validate the command rectangle against the destination surface dimensions, allowing attacker-controlled `cmd->left`/`cmd->top` (and subcodec rectangle offsets) to reach image copy routines that write into `surface->data` without bounds enforcement. The OOB write corrupts an adjacent `gdiGfxSurface` struct's `codecs*` pointer with attacker-controlled pixel data, and corruption of `codecs*` is sufficient to reach an indirect function pointer call (`NSC_CONTEXT.decode` at `nsc.c:500`) on a subsequent codec command — full instruction pointer (RIP) control demonstrated in exploitability harness. Users should upgrade to version 3.23.0 to receive a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix memory leak in get_file_all_info()
In get_file_all_info(), if vfs_getattr() fails, the function returns
immediately without freeing the allocated filename, leading to a memory
leak.
Fix this by freeing the filename before returning in this error case. |
| MiniGal Nano version 0.3.5 and prior contain a reflected cross-site scripting (XSS) vulnerability in index.php via the dir parameter. The application constructs $currentdir from user-controlled input and embeds it into an error message without output encoding, allowing an attacker to supply HTML/JavaScript that is reflected in the response. Successful exploitation can lead to execution of arbitrary script in a victim's browser in the context of the vulnerable application. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: properly keep track of conduit reference
Problem description
-------------------
DSA has a mumbo-jumbo of reference handling of the conduit net device
and its kobject which, sadly, is just wrong and doesn't make sense.
There are two distinct problems.
1. The OF path, which uses of_find_net_device_by_node(), never releases
the elevated refcount on the conduit's kobject. Nominally, the OF and
non-OF paths should result in objects having identical reference
counts taken, and it is already suspicious that
dsa_dev_to_net_device() has a put_device() call which is missing in
dsa_port_parse_of(), but we can actually even verify that an issue
exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command
"before" and "after" applying this patch:
(unbind the conduit driver for net device eno2)
echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
we see these lines in the output diff which appear only with the patch
applied:
kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000)
kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000)
2. After we find the conduit interface one way (OF) or another (non-OF),
it can get unregistered at any time, and DSA remains with a long-lived,
but in this case stale, cpu_dp->conduit pointer. Holding the net
device's underlying kobject isn't actually of much help, it just
prevents it from being freed (but we never need that kobject
directly). What helps us to prevent the net device from being
unregistered is the parallel netdev reference mechanism (dev_hold()
and dev_put()).
Actually we actually use that netdev tracker mechanism implicitly on
user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with
the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link().
But time still passes at DSA switch probe time between the initial
of_find_net_device_by_node() code and the user port creation time, time
during which the conduit could unregister itself and DSA wouldn't know
about it.
So we have to run of_find_net_device_by_node() under rtnl_lock() to
prevent that from happening, and release the lock only with the netdev
tracker having acquired the reference.
Do we need to keep the reference until dsa_unregister_switch() /
dsa_switch_shutdown()?
1: Maybe yes. A switch device will still be registered even if all user
ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not
make user port errors fatal"), and the cpu_dp->conduit pointers
remain valid. I haven't audited all call paths to see whether they
will actually use the conduit in lack of any user port, but if they
do, it seems safer to not rely on user ports for that reference.
2. Definitely yes. We support changing the conduit which a user port is
associated to, and we can get into a situation where we've moved all
user ports away from a conduit, thus no longer hold any reference to
it via the net device tracker. But we shouldn't let it go nonetheless
- see the next change in relation to dsa_tree_find_first_conduit()
and LAG conduits which disappear.
We have to be prepared to return to the physical conduit, so the CPU
port must explicitly keep another reference to it. This is also to
say: the user ports and their CPU ports may not always keep a
reference to the same conduit net device, and both are needed.
As for the conduit's kobject for the /sys/class/net/ entry, we don't
care about it, we can release it as soon as we hold the net device
object itself.
History and blame attribution
-----------------------------
The code has been refactored so many times, it is very difficult to
follow and properly attribute a blame, but I'll try to make a short
history which I hope to be correct.
We have two distinct probing paths:
- one for OF, introduced in 2016 i
---truncated--- |
| A flaw was found in the X.org server. Due to improperly tracked allocation size in _XkbSetCompatMap, a local attacker may be able to trigger a buffer overflow condition via a specially crafted payload, leading to denial of service or local privilege escalation in distributions where the X.org server is run with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory and information leak in smb3_reconfigure()
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case. |
| A memory leak flaw was found in Golang in the RSA encrypting/decrypting code, which might lead to a resource exhaustion vulnerability using attacker-controlled inputs. The memory leak happens in github.com/golang-fips/openssl/openssl/rsa.go#L113. The objects leaked are pkey and ctx. That function uses named return parameters to free pkey and ctx if there is an error initializing the context or setting the different properties. All return statements related to error cases follow the "return nil, nil, fail(...)" pattern, meaning that pkey and ctx will be nil inside the deferred function that should free them. |
