| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer underflow vulnerability in Open-SAE-J1939 thru commit b6caf884df46435e539b1ecbf92b6c29b345bdfe (2025-11-30) in SAE_J1939_Read_Transport_Protocol_Data_Transfer,allows attackers to write to arbitrary memory via crafted sequence number from the CAN frame. |
| openxc/isotp-c thru commit 5a5d19245f65189202719321facd49ce6f5d46ac (2021-08-09) contains an out-of-bounds read in the ISO-TP Single Frame receive handler, where the 4-bit payload length nibble is used directly as the memcpy size without validating it against the actual CAN data length. A malicious CAN frame with an oversized length nibble can cause memory reads beyond the buffer, allowing attackers to cause a denial of service, or gain sensitive information. |
| collin80/Open-SAE-J1939 thru commit 744024d4306bc387857dfce439558336806acb06 (2023-03-08) contains an integer underflow leading to out-of-bounds write in Transport Protocol Data Transfer handling. At line 23: uint8_t index = data[0] - 1. When data[0] (sequence number from CAN frame) is 0, index underflows to 255. Subsequent write at tp_dt->data[255*7 + i-1] reaches offset 1791, exceeding the MAX_TP_DT buffer (1785 bytes) by 6 bytes. |
| OpenAMP v2025.10.0 ELF loader contains an integer overflow vulnerability in firmware image parsing. In elf_loader.c, it performs multiplication of two attacker-controlled 16-bit values from the ELF header without overflow checking. On 32-bit embedded systems (STM32MP1, Zynq, i.MX), large values can cause the product to wrap around to a small value. |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_gvret.cpp, the length field in GVRET binary data is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted GVRET frames. |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_pcap.cpp , the parser's phdr.len field is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted PCAP input. |
| flipperzero-firmware commit ad2a80 was discovered to contain a stack overflow in the "Main" function. |
| Bitwarden CLI 2026.4.0 from 2026-04-22T21:57Z to 2026-04-22T23:30Z, when obtained from npm, had embedded malicious code. This is related to a Checkmarx supply chain incident. |
| The Gravity Forms plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to and including 2.10.0. This is due to insufficient input validation and output escaping on Hidden Product field values when used inside Repeater fields, where repeater subfields bypass state validation checks and the Hidden Product validate() method only validates the quantity field while ignoring the product name field that is later output without proper escaping in the get_value_entry_detail() method. This makes it possible for unauthenticated attackers to inject arbitrary web scripts through form submissions that will execute whenever an administrator views the entry details. |
| The Geo Mashup plugin for WordPress is vulnerable to time-based blind SQL Injection via the 'geo_mashup_null_fields' parameter in all versions up to, and including, 1.13.19 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Booking for Appointments and Events Calendar – Amelia plugin for WordPress is vulnerable to Improper Authorization in all versions up to, and including, 2.1.2. This is due to a logical short-circuit flaw in authorization logic that causes token validation to be entirely skipped when a booking has a 'waiting' status. This makes it possible for unauthenticated attackers to approve any booking that is in 'waiting' status by sending a crafted request to the publicly-accessible admin-ajax endpoint. |
| The Widget Options – Advanced Conditional Visibility for Gutenberg Blocks & Classic Widgets plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.2.2 via the Display Logic feature. This is due to the plugin using eval() on user-supplied Display Logic expressions with an insufficient blocklist/allowlist that can be bypassed using array_map with string concatenation, combined with a lack of authorization enforcement on the extended_widget_opts_block attribute. This makes it possible for authenticated attackers, with Contributor-level access and above, to execute code on the server. The vulnerability was partially patched in version 4.2.0. |
| The FundPress – WordPress Donation Plugin for WordPress is vulnerable to authorization bypass in versions up to and including 2.0.8. This is due to missing authorization and nonce verification in the donate_action_status() AJAX handler, which is registered to be accessible to unauthenticated users via wp_ajax_nopriv. The function only validates that the schema parameter equals 'donate-ajax' and that the required POST parameters are present, but fails to verify user capabilities, nonce tokens, or donation ownership. This makes it possible for unauthenticated attackers to modify the status of any donation by providing its ID (which are sequential integers and easily enumerable), allowing them to mark donations as completed, pending, cancelled, or any arbitrary status, potentially triggering email notifications and related side effects. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ftgmac100: fix ring allocation unwind on open failure
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs()
sqe->len is __u32 but gets stored into sr->len which is int. When
userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF),
sr->len overflows to a negative value. This negative value propagates
through the bundle recv/send path:
1. io_recv(): sel.val = sr->len (ssize_t gets -1)
2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets
0xFFFFFFFFFFFFFFFF)
3. io_ring_buffers_peek(): buf->len is not clamped because max_len
is astronomically large
4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs()
5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1,
causing ret to increase instead of decrease, creating an
infinite loop that reads past the allocated iov[] array
This results in a slab-out-of-bounds read in io_bundle_nbufs() from
the kmalloc-64 slab, as nbufs increments past the allocated iovec
entries.
BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160
Read of size 8 at addr ffff888100ae05c8 by task exp/145
Call Trace:
io_bundle_nbufs+0x128/0x160
io_recv_finish+0x117/0xe20
io_recv+0x2db/0x1160
Fix this by rejecting negative sr->len values early in both
io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32,
any value > INT_MAX indicates overflow and is not a valid length. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization
The recent refactoring of xfi driver changed the assignment of
atc->daios[] at atc_get_resources(); now it loops over all enum
DAIOTYP entries while it looped formerly only a part of them.
The problem is that the last entry, SPDIF1, is a special type that
is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO),
and there is no corresponding definition for hw20k2. Due to the lack
of the info, it caused a kernel crash on hw20k2, which was already
worked around by the commit b045ab3dff97 ("ALSA: ctxfi: Fix missing
SPDIFI1 index handling").
This patch addresses the root cause of the regression above properly,
simply by skipping the incorrect SPDIF1 type in the parser loop.
For making the change clearer, the code is slightly arranged, too. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Fix missing SPDIFI1 index handling
SPDIF1 DAIO type isn't properly handled in daio_device_index() for
hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds
array access. Follow the hw20k1 pattern and return the proper index
for this type, too. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix stack out-of-bounds read in init_card
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stack.
A USB device with a product name containing many non-ASCII, non-space
characters (e.g. multibyte UTF-8) will reliably trigger this as follows:
BUG: KASAN: stack-out-of-bounds in copy_valid_id_string
sound/core/init.c:696 [inline]
BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c
sound/core/init.c:718
The off-by-one has been present since commit bafeee5b1f8d ("ALSA:
snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1),
which first introduced this whitespace-stripping loop. The original
code never accounted for the null terminator when bounding the copy.
Fix this by changing the loop bound to `sizeof(card->id) - 1`,
ensuring at least one byte remains as the null terminator. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler()
The memcpy function assumes the dynamic array notif->matches is at least
as large as the number of bytes to copy. Otherwise, results->matches may
contain unwanted data. To guarantee safety, extend the validation in one
of the checks to ensure sufficient packet length.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
