| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability of inadequate packet length check in the BLE module.
Impact: Successful exploitation of this vulnerability may affect performance. |
| The rosenpass crate before 0.2.1 for Rust allows remote attackers to cause a denial of service (panic) via a one-byte UDP packet. |
| An Improper Handling of Length Parameter Inconsistency vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a logically adjacent BGP peer sending a specifically malformed BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
Only systems configured for Ethernet Virtual Private Networking (EVPN) signaling are vulnerable to this issue.
This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability.This issue affects:
Junos OS:
* all versions before 21.4R3-S11,
* from 22.2 before 22.2R3-S7,
* from 22.4 before 22.4R3-S7,
* from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S1,
* from 24.4 before 24.4R1-S3, 24.4R2;
Junos OS Evolved:
* all versions before 22.2R3-S7-EVO,
* from 22.4-EVO before 22.4R3-S7-EVO,
* from 23.2-EVO before 23.2R2-S4-EVO,
* from 23.4-EVO before 23.4R2-S5-EVO,
* from 24.2-EVO before 24.2R2-S1-EVO,
* from 24.4-EVO before 24.4R1-S3-EVO, 24.4R2-EVO. |
| A Speculative Race Condition (SRC) vulnerability that impacts modern CPU architectures supporting speculative execution (related to Spectre V1) has been disclosed. An unauthenticated attacker can exploit this vulnerability to disclose arbitrary data from the CPU using race conditions to access the speculative executable code paths. |
| In ConnMan through 1.44, parse_rr in dnsproxy.c has a memcpy length that depends on an RR RDLENGTH value, i.e., *rdlen=ntohs(rr->rdlen) and memcpy(response+offset,*end,*rdlen) without a check for whether the sum of *end and *rdlen exceeds max. Consequently, *rdlen may be larger than the amount of remaining packet data in the current state of parsing. Values of stack memory locations may be sent over the network in a response. |
| rPGP is a pure Rust implementation of OpenPGP. Prior to 0.14.1, rPGP allows an attacker to trigger rpgp crashes by providing crafted data. This vulnerability is fixed in 0.14.1. |
| An Improper Handling of Length Parameter Inconsistency vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When a device configured for Secure Vector Routing (SVR) receives a specifically malformed packet the PFE will crash and restart.
This issue affects Junos OS on SRX Series:
* All 21.4 versions,
* 22.2 versions before 22.2R3-S6,
* 22.4 versions before 22.4R3-S6,
* 23.2 versions before 23.2R2-S3,
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2.
This issue does not affect versions before 21.4. |
| The web-push crate before 0.10.3 for Rust allows a denial of service (memory consumption) in the built-in clients via a large integer in a Content-Length header. |
| A privileged attacker
can prevent delivery of debug exceptions to SEV-SNP guests potentially
resulting in guests not receiving expected debug information.
|
| A security vulnerability has been identified in the pkcs11-provider, which is associated with Public-Key Cryptography Standards (PKCS#11). If exploited successfully, this vulnerability could result in a Bleichenbacher-like security flaw, potentially enabling a side-channel attack on PKCS#1 1.5 decryption. |
| Improper Handling of Length Parameter Inconsistency vulnerability in Mitsubishi Electric FA Engineering Software (CPU Module Logging Configuration Tool versions 1.112R and prior, CW Configurator versions 1.011M and prior, Data Transfer versions 3.44W and prior, EZSocket versions 5.4 and prior, FR Configurator all versions, FR Configurator SW3 all versions, FR Configurator2 versions 1.24A and prior, GT Designer3 Version1(GOT1000) versions 1.250L and prior, GT Designer3 Version1(GOT2000) versions 1.250L and prior, GT SoftGOT1000 Version3 versions 3.245F and prior, GT SoftGOT2000 Version1 versions 1.250L and prior, GX Configurator-DP versions 7.14Q and prior, GX Configurator-QP all versions, GX Developer versions 8.506C and prior, GX Explorer all versions, GX IEC Developer all versions, GX LogViewer versions 1.115U and prior, GX RemoteService-I all versions, GX Works2 versions 1.597X and prior, GX Works3 versions 1.070Y and prior, iQ Monozukuri ANDON (Data Transfer) versions 1.003D and prior, iQ Monozukuri Process Remote Monitoring (Data Transfer) versions 1.002C and prior, M_CommDTM-HART all versions, M_CommDTM-IO-Link versions 1.03D and prior, MELFA-Works versions 4.4 and prior, MELSEC WinCPU Setting Utility all versions, MELSOFT EM Software Development Kit (EM Configurator) versions 1.015R and prior, MELSOFT Navigator versions 2.74C and prior, MH11 SettingTool Version2 versions 2.004E and prior, MI Configurator versions 1.004E and prior, MT Works2 versions 1.167Z and prior, MX Component versions 5.001B and prior, Network Interface Board CC IE Control utility versions 1.29F and prior, Network Interface Board CC IE Field Utility versions 1.16S and prior, Network Interface Board CC-Link Ver.2 Utility versions 1.23Z and prior, Network Interface Board MNETH utility versions 34L and prior, PX Developer versions 1.53F and prior, RT ToolBox2 versions 3.73B and prior, RT ToolBox3 versions 1.82L and prior, Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) versions 4.12N and prior, and SLMP Data Collector versions 1.04E and prior) allows a remote unauthenticated attacker to cause a DoS condition on the software products, and possibly to execute a malicious code on the personal computer running the software products although it has not been reproduced, by spoofing MELSEC, GOT or FREQROL and returning crafted reply packets. |
| Improper Handling of Length Parameter Inconsistency in GitHub repository ikus060/rdiffweb prior to 2.4.8. |
| Improper Handling of Length Parameter Inconsistency in GitHub repository ikus060/rdiffweb prior to 2.4.8. |
| The communication framework module has a vulnerability of not truncating data properly.Successful exploitation of this vulnerability may affect data confidentiality. |
| NamelessMC is a free, easy to use & powerful website software for Minecraft servers. In version 2.1.4 and prior, the s parameter in GET requests for forum search functionality lacks length validation, allowing attackers to submit excessively long search queries. This oversight can lead to performance degradation and potential denial-of-service (DoS) attacks. This issue has been patched in version 2.2.0. |
| In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory). |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: pass correct message length to ip6_append_data
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix overflow in oa batch buffer
By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch
buffer, this is not a problem if batch buffer is only used once but
oa reuses the batch buffer for the same metric and at each call
it appends a MI_BATCH_BUFFER_END, printing the warning below and then
overflowing.
[ 381.072016] ------------[ cut here ]------------
[ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed!
platform: LUNARLAKE subplatform: 1
graphics: Xe2_LPG / Xe2_HPG 20.04 step B0
media: Xe2_LPM / Xe2_HPM 20.00 step B0
tile: 0 VRAM 0 B
GT: 0 type 1
So here checking if batch buffer already have MI_BATCH_BUFFER_END if
not append it.
v2:
- simply fix, suggestion from Ashutosh
(cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - Ensure payload is zero when using key slot
We could leak stack memory through the payload field when running
AES with a key from one of the hardware's key slots. Fix this by
ensuring the payload field is set to 0 in such cases.
This does not affect the common use case when the key is supplied
from main memory via the descriptor payload. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
int type = nla_type(nla);
if (type > XFRMA_MAX) {
return -EOPNOTSUPP;
}
@type is then used as an array index and can be used
as a Spectre v1 gadget.
if (nla_len(nla) < compat_policy[type].len) {
array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users. |
