| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
syzbot reported static_branch_dec() underflow in aql_enable_write(). [0]
The problem is that aql_enable_write() does not serialise concurrent
write()s to the debugfs.
aql_enable_write() checks static_key_false(&aql_disable.key) and
later calls static_branch_inc() or static_branch_dec(), but the
state may change between the two calls.
aql_disable does not need to track inc/dec.
Let's use static_branch_enable() and static_branch_disable().
[0]:
val == 0
WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288
Modules linked in:
CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full)
Tainted: [U]=USER, [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311
Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00
RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4
RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98
FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline]
__static_key_slow_dec kernel/jump_label.c:321 [inline]
static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336
aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343
short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383
vfs_write+0x2aa/0x1070 fs/read_write.c:684
ksys_pwrite64 fs/read_write.c:793 [inline]
__do_sys_pwrite64 fs/read_write.c:801 [inline]
__se_sys_pwrite64 fs/read_write.c:798 [inline]
__x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f530cf9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9
RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010
RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix integer underflow in chain mode
The jumbo_frm() chain-mode implementation unconditionally computes
len = nopaged_len - bmax;
where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is
BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit()
decides to invoke jumbo_frm() based on skb->len (total length including
page fragments):
is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
When a packet has a small linear portion (nopaged_len <= bmax) but a
large total length due to page fragments (skb->len > bmax), the
subtraction wraps as an unsigned integer, producing a huge len value
(~0xFFFFxxxx). This causes the while (len != 0) loop to execute
hundreds of thousands of iterations, passing skb->data + bmax * i
pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less
SoCs (the typical deployment for stmmac), this maps arbitrary kernel
memory to the DMA engine, constituting a kernel memory disclosure and
potential memory corruption from hardware.
Fix this by introducing a buf_len local variable clamped to
min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then
always safe: it is zero when the linear portion fits within a single
descriptor, causing the while (len != 0) loop to be skipped naturally,
and the fragment loop in stmmac_xmit() handles page fragments afterward. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated--- |
| uriparser before 1.0.1 has numeric truncation in text range comparison, if an application accepts URIs with a length in gigabytes. |
| nimiq-block contains block primitives to be used in Nimiq's Rust implementation. `SkipBlockProof::verify` computes its quorum check using `BitSet.len()`, then iterates `BitSet` indices and casts each `usize` index to `u16` (`slot as u16`) for slot lookup. Prior to version 1.3.0, if an attacker can get a `SkipBlockProof` verified where `MultiSignature.signers` contains out-of-range indices spaced by 65536, these indices inflate `len()` but collide onto the same in-range `u16` slot during aggregation. This makes it possible for a malicious validator with far fewer than `2f+1` real signer slots to pass skip block proof verification by multiplying a single BLS signature by the same factor. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| nimiq-account contains account primitives to be used in Nimiq's Rust implementation. Prior to version 1.3.0, `VestingContract::can_change_balance` returns `AccountError::InsufficientFunds` when `new_balance < min_cap`, but it constructs the error using `balance: self.balance - min_cap`. `Coin::sub` panics on underflow, so if an attacker can reach a state where `min_cap > balance`, the node crashes while trying to return an error. The `min_cap > balance` precondition is attacker-reachable because the vesting contract creation data (32-byte format) allows encoding `total_amount` without validating `total_amount <= transaction.value` (the real contract balance). After creating such a vesting contract, the attacker can broadcast an outgoing transaction to trigger the panic during mempool admission and block processing. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| Integer overflow in constant tensor data size calculation in Samsung Open Source ONE could cause incorrect buffer sizing for large constant nodes.
Affected version is prior to commit 1.30.0. |
| Integer overflow in scratch buffer initialization size calculation in Samsung Open Source ONE cause incorrect memory initialization for large intermediate tensors.
Affected version is prior to commit 1.30.0. |
| Integer overflow in tensor copy size calculation in Samsung Open Source ONE could lead to out of bounds access during loop state propagation.
Affected version is prior to commit 1.30.0. |
| Integer overflow in memory copy size calculation in Samsung Open Source ONE could lead to invalid memory operations with large tensor shapes.
Affected version is prior to commit 1.30.0. |
| Integer overflow in output tensor copy size calculation in Samsung Open Source ONE could cause incorrect copy length and memory corruption for oversized tensors.
Affected version is prior to commit 1.30.0. |
| Integer overflow in buffer size calculation could result in out of bounds memory access when handling large tensors in Samsung Open Source ONE.
Affected version is prior to commit 1.30.0. |
| Potential Integer overflow in tensor allocation size calculation could lead to insufficient memory allocation for large tensors in Samsung Open Source ONE.
Affected version is prior to commit 1.30.0. |
| An integer overflow existed in the wolfCrypt CMAC implementation, that could be exploited to forge CMAC tags. The function wc_CmacUpdate used the guard `if (cmac->totalSz != 0)` to skip XOR-chaining on the first block (where digest is all-zeros and the XOR is a no-op). However, totalSz is word32 and wraps to zero after 2^28 block flushes (4 GiB), causing the guard to erroneously discard the live CBC-MAC chain state. Any two messages sharing a common suffix beyond the 4 GiB mark then produce identical CMAC tags, enabling a zero-work prefix-substitution forgery. The fix removes the guard, making the XOR unconditional; the no-op property on the first block is preserved because digest is zero-initialized by wc_InitCmac_ex. |
| A heap-based buffer overflow vulnerability exists in the GGUF library header.n_kv functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Versions prior to 3.25.0 have an off-by-one in the path traversal filter in `channels/drive/client/drive_file.c`. The `contains_dotdot()` function catches `../` and `..\` mid-path but misses `..` when it's the last component with no trailing separator. A rogue RDP server can read, list, or write files one directory above the client's shared folder through RDPDR requests. This requires the victim to connect with drive redirection enabled. Version 3.25.0 patches the issue. |
| A heap-based buffer overflow vulnerability exists in the GGUF library header.n_tensors functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| A heap-based buffer overflow vulnerability exists in the GGUF library gguf_fread_str functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| A heap-based buffer overflow vulnerability exists in the GGUF library GGUF_TYPE_ARRAY/GGUF_TYPE_STRING parsing functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix overflow when accumulating packets
Add a check to ensure that `x25_sock.fraglen` does not overflow.
The `fraglen` also needs to be resetted when purging `fragment_queue` in
`x25_clear_queues()`. |
