| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| JuiceFS through 1.3.1, fixed in commit a46979c, contains an authentication bypass vulnerability that allows unauthenticated remote attackers to access sensitive debug and metrics endpoints by exploiting improper handler registration on the shared http.DefaultServeMux. Attackers can request the /debug/pprof/cmdline endpoint to obtain the process command line containing metadata engine connection strings with database credentials, granting full read/write access to filesystem metadata, while other pprof handlers leak internal state and profiling handlers enable denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: tegra124-emc: Fix dll_change check
The code checking whether the specified memory timing enables DLL
in the EMRS register was reversed. DLL is enabled if bit A0 is low.
Fix the check. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: scope conn->binding slowpath to bound sessions only
When the binding SESSION_SETUP sets conn->binding = true, the flag stays
set after the call so that the global session lookup in
ksmbd_session_lookup_all() can find the session, which was not added to
conn->sessions. Because the flag is connection-wide, the global lookup
path will also resolve any other session by id if asked.
Tighten the global lookup so that the returned session must have this
connection registered in its channel xarray (sess->ksmbd_chann_list).
The channel entry is installed by the existing binding_session path in
ntlm_authenticate()/krb5_authenticate() when a SESSION_SETUP completes
successfully, so this condition is a strict equivalent of "this
connection has been accepted as a channel of this session". Connections
that have not bound to a given session cannot reach it via the global
table.
The existing conn->binding gate for entering the slowpath is preserved
so that non-binding connections keep the fast-path-only behavior, and
the session->state check is unchanged. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, in cases where UDP DNS filter is configured with local resolution containing a name with the length of 255 octets or remote resolution for a name of 255 octets long can complete successfully, a query with such name will result in abnormal process termination. The abnormal process termination is triggered by an invalid runtime precondition that the query name is strictly less than 255 octets, contradicting DNS specification rfc1035#section-2.3.4 that the name can be 255 or less octets. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| n8n is an open source workflow automation platform. Prior to 2.25.7 and 2.26.2, an authenticated user with permission to create or modify workflows could pollute the sandbox used by the Merge node's SQL Query mode. Because the sandbox context was cached and reused across all workflow executions on the instance, prototype mutations introduced by one user's workflow persist into subsequent Merge SQL executions belonging to other users or projects. This allowed a low-privileged attacker to intercept workflow data processed by other users on the same instance. This issue only affects multi-user n8n instances where more than one user has permission to create and execute workflows containing the Merge node in SQL Query mode. This vulnerability is fixed in 2.25.7 and 2.26.2. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, the fix for GHSA-8hg8-63c5-gwmx (CVE-2023-37903) introduced a check in nodevm.js line 263 that blocks the combination nesting: true + require: false. However, the check uses strict equality (options.require === false), which is trivially bypassed by omitting the require option entirely. When require is not specified, options.require is undefined, not false. The strict equality check fails, so the security guard is skipped. Immediately after (line 280), the destructuring default require: requireOpts = false assigns requireOpts = false, producing the exact configuration the patch was designed to prevent. This issue has been patched in version 3.11.4. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sock: fix hardened usercopy panic in sock_recv_errqueue
skbuff_fclone_cache was created without defining a usercopy region,
[1] unlike skbuff_head_cache which properly whitelists the cb[] field.
[2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is
enabled and the kernel attempts to copy sk_buff.cb data to userspace
via sock_recv_errqueue() -> put_cmsg().
The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone()
(from skbuff_fclone_cache) [1]
2. The skb is cloned via skb_clone() using the pre-allocated fclone
[3] 3. The cloned skb is queued to sk_error_queue for timestamp
reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE)
5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb
[4] 6. __check_heap_object() fails because skbuff_fclone_cache has no
usercopy whitelist [5]
When cloned skbs allocated from skbuff_fclone_cache are used in the
socket error queue, accessing the sock_exterr_skb structure in skb->cb
via put_cmsg() triggers a usercopy hardening violation:
[ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)!
[ 5.382796] kernel BUG at mm/usercopy.c:102!
[ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
[ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7
[ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80
[ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490
[ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246
[ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74
[ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0
[ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74
[ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001
[ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00
[ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000
[ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0
[ 5.384903] PKRU: 55555554
[ 5.384903] Call Trace:
[ 5.384903] <TASK>
[ 5.384903] __check_heap_object+0x9a/0xd0
[ 5.384903] __check_object_size+0x46c/0x690
[ 5.384903] put_cmsg+0x129/0x5e0
[ 5.384903] sock_recv_errqueue+0x22f/0x380
[ 5.384903] tls_sw_recvmsg+0x7ed/0x1960
[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5.384903] ? schedule+0x6d/0x270
[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5.384903] ? mutex_unlock+0x81/0xd0
[ 5.384903] ? __pfx_mutex_unlock+0x10/0x10
[ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10
[ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0
[ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40
[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5
The crash offset 296 corresponds to skb2->cb within skbuff_fclones:
- sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 -
offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 =
272 + 24 (inside sock_exterr_skb.ee)
This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure.
[1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885
[2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104
[3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566
[4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491
[5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719 |
| The ai_cmd utility executes with full root permissions. It pipes socket inputs directly to popen(), paving the way for unauthenticated users to execute arbitrary root commands. |
| Authentication bypass by capture-replay vulnerability exists in Machine automation controller NX7 series all models V1.28 and earlier, Machine automation controller NX1 series all models V1.48 and earlier, and Machine automation controller NJ series all models V 1.48 and earlier, which may allow an adjacent attacker who can analyze the communication between the controller and the specific software used by OMRON internally to cause a denial-of-service (DoS) condition or execute a malicious program. |
| A race condition in the shared Extreme Platform
ONE IAM Gateway API-key authentication path could, under specific
high-concurrency traffic conditions, intermittently allow requests
authenticated with an Extreme Platform ONE /IAM-issued API key to receive
response data for another tenant. The issue was observed through ExtremeCloud
IQ/XIQ API endpoints and validated against both XIQ/XAPI and Extreme Platform ONE
/Common Services API paths. XIQ-native tokens and standard OAuth/Bearer JWT
authentication were not affected. |
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO creates one shared UFOWebSocketHandler instance and reuses it for multiple authenticated WebSocket connections. The handler stores per-connection protocol objects in mutable instance fields. Each new WebSocket connection overwrites those fields. Later, message handlers send responses through the shared fields instead of through protocol objects bound to the originating connection. As a result, the most recently connected authenticated client can receive protocol responses that belong to another authenticated client. |
| Algernon is a small self-contained pure-Go web server. Prior to 1.17.7, when Algernon is invoked with a single file path instead of a directory, singleFileMode is set to true and debugMode is forcibly enabled. debugMode activates the PrettyError renderer, which on any Lua or template error response dumps the absolute path of the file that errored, complete byte contents of that file, and exception or parser error text. This response is served with HTTP 200 OK to whoever sent the request that triggered the error. Any client able to reach the server and able to provoke a runtime error in the served script obtains the full server-side source of that script and of any sibling Lua data file consulted during the request. This vulnerability is fixed in 1.17.7. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix krb5 mount with username option
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
``` |
| Excessive caching of authentication context in Neo4j Enterprise edition versions prior to 2026.01.4 leads to authenticated users inheriting the context of the first user who authenticated after restart. The issue is limited to certain non-default configurations of SSO (UserInfo endpoint).
We recommend upgrading to versions 2026.01.4 (or 5.26.22) where the issue is fixed. |
| A missing break statement in DSI OpenSession processing in Netatalk 1.5.0 through 4.4.2 causes a DSIOPT_ATTNQUANT switch case to fall through into DSIOPT_SERVQUANT, resulting in unintended session option handling that may allow a remote attacker to cause a minor service disruption via crafted DSI session options. |
| Active debug code exists in the ARN resolver of amazon-mq rabbitmq-aws before version 0.2.1. A debug ARN scheme (arn:aws-debug:file) accepted by the PUT /api/aws/arn/validate validation endpoint might allow remote authenticated users to perform arbitrary file reads on any file accessible to the RabbitMQ process.
To remediate this issue, customers should upgrade to version 0.2.1 of rabbitmq-aws. If RabbitMQ is configured to use TLS for connections, we also recommend rotating any associated private certificate keys. |
| Exposure of Data Element to Wrong Session vulnerability in Mia Technology Inc. MİA-MED allows Read Sensitive Strings Within an Executable.
This issue affects MİA-MED: before 1.0.7. |
| Software which sets SO_REUSEPORT_LB on a socket and then connects it to a host will not directly observe any problems. However, due to its membership in a load-balancing group, that socket will receive packets originating from any host. This breaks the contract of the connect(2) and implied connect via sendto(2), and may leave the application vulnerable to spoofing attacks.
The kernel failed to check the connection state of sockets when adding them to load-balancing groups. Furthermore, when looking up the destination socket for an incoming packet, the kernel will match a socket belonging to a load-balancing group even if it is connected, in violation of the contract that connected sockets are only supposed to receive packets originating from the connected host. |
| Development and test API endpoints are present that mirror production functionality. |
| OpenProject is an open-source, web-based project management software. Users of OpenProject versions prior to 16.6.5 and 17.0.1 have the ability to view and end their active sessions via Account Settings → Sessions. When deleting a session, it was not properly checked if the session belongs to the user. As the ID that is used to identify these session objects use incremental integers, users could iterate requests using `DELETE /my/sessions/:id` and thus unauthenticate other users. Users did not have access to any sensitive information (like browser identifier, IP addresses, etc) of other users that are stored in the session. The problem was patched in OpenProject versions 16.6.5 and 17.0.1. No known workarounds are available as this does not require any permissions or other that can temporarily be disabled. |
