| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| httparty before 0.21.0 is vulnerable to an assumed-immutable web parameter vulnerability. A remote and unauthenticated attacker can provide a crafted filename parameter during multipart/form-data uploads which could result in attacker controlled filenames being written. |
| The Sangfor Next-Gen Application Firewall version NGAF8.0.17 is vulnerable to a source code disclosure vulnerability. A remote and unauthenticated attacker can obtain PHP source code by sending an HTTP request with an invalid Content-Length field. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: avoid kernel hung in hinic_get_stats64()
When using hinic device as a bond slave device, and reading device stats
of master bond device, the kernel may hung.
The kernel panic calltrace as follows:
Kernel panic - not syncing: softlockup: hung tasks
Call trace:
native_queued_spin_lock_slowpath+0x1ec/0x31c
dev_get_stats+0x60/0xcc
dev_seq_printf_stats+0x40/0x120
dev_seq_show+0x1c/0x40
seq_read_iter+0x3c8/0x4dc
seq_read+0xe0/0x130
proc_reg_read+0xa8/0xe0
vfs_read+0xb0/0x1d4
ksys_read+0x70/0xfc
__arm64_sys_read+0x20/0x30
el0_svc_common+0x88/0x234
do_el0_svc+0x2c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
And the calltrace of task that actually caused kernel hungs as follows:
__switch_to+124
__schedule+548
schedule+72
schedule_timeout+348
__down_common+188
__down+24
down+104
hinic_get_stats64+44 [hinic]
dev_get_stats+92
bond_get_stats+172 [bonding]
dev_get_stats+92
dev_seq_printf_stats+60
dev_seq_show+24
seq_read_iter+964
seq_read+220
proc_reg_read+164
vfs_read+172
ksys_read+108
__arm64_sys_read+28
el0_svc_common+132
do_el0_svc+40
el0_svc+24
el0_sync_handler+164
el0_sync+324
When getting device stats from bond, kernel will call bond_get_stats().
It first holds the spinlock bond->stats_lock, and then call
hinic_get_stats64() to collect hinic device's stats.
However, hinic_get_stats64() calls `down(&nic_dev->mgmt_lock)` to
protect its critical section, which may schedule current task out.
And if system is under high pressure, the task cannot be woken up
immediately, which eventually triggers kernel hung panic.
Since previous patch has replaced hinic_dev.tx_stats/rx_stats with local
variable in hinic_get_stats64(), there is nothing need to be protected
by lock, so just removing down()/up() is ok. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/mdp5: Fix global state lock backoff
We need to grab the lock after the early return for !hwpipe case.
Otherwise, we could have hit contention yet still returned 0.
Fixes an issue that the new CONFIG_DRM_DEBUG_MODESET_LOCK stuff flagged
in CI:
WARNING: CPU: 0 PID: 282 at drivers/gpu/drm/drm_modeset_lock.c:296 drm_modeset_lock+0xf8/0x154
Modules linked in:
CPU: 0 PID: 282 Comm: kms_cursor_lega Tainted: G W 5.19.0-rc2-15930-g875cc8bc536a #1
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock+0xf8/0x154
lr : drm_atomic_get_private_obj_state+0x84/0x170
sp : ffff80000cfab6a0
x29: ffff80000cfab6a0 x28: 0000000000000000 x27: ffff000083bc4d00
x26: 0000000000000038 x25: 0000000000000000 x24: ffff80000957ca58
x23: 0000000000000000 x22: ffff000081ace080 x21: 0000000000000001
x20: ffff000081acec18 x19: ffff80000cfabb80 x18: 0000000000000038
x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffea0d0
x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47
x11: ffff80000a386aa8 x10: 0000000000000029 x9 : ffff80000cfab610
x8 : 0000000000000029 x7 : 0000000000000014 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff8000081ad904 x3 : 0000000000000029
x2 : ffff0000801db4c0 x1 : ffff80000cfabb80 x0 : ffff000081aceb58
Call trace:
drm_modeset_lock+0xf8/0x154
drm_atomic_get_private_obj_state+0x84/0x170
mdp5_get_global_state+0x54/0x6c
mdp5_pipe_release+0x2c/0xd4
mdp5_plane_atomic_check+0x2ec/0x414
drm_atomic_helper_check_planes+0xd8/0x210
drm_atomic_helper_check+0x54/0xb0
...
---[ end trace 0000000000000000 ]---
drm_modeset_lock attempting to lock a contended lock without backoff:
drm_modeset_lock+0x148/0x154
mdp5_get_global_state+0x30/0x6c
mdp5_pipe_release+0x2c/0xd4
mdp5_plane_atomic_check+0x290/0x414
drm_atomic_helper_check_planes+0xd8/0x210
drm_atomic_helper_check+0x54/0xb0
drm_atomic_check_only+0x4b0/0x8f4
drm_atomic_commit+0x68/0xe0
Patchwork: https://patchwork.freedesktop.org/patch/492701/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: hibmcge: fix rtnl deadlock issue
Currently, the hibmcge netdev acquires the rtnl_lock in
pci_error_handlers.reset_prepare() and releases it in
pci_error_handlers.reset_done().
However, in the PCI framework:
pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked -
pci_dev_save_and_disable - err_handler->reset_prepare(dev);
In pci_slot_save_and_disable_locked():
list_for_each_entry(dev, &slot->bus->devices, bus_list) {
if (!dev->slot || dev->slot!= slot)
continue;
pci_dev_save_and_disable(dev);
if (dev->subordinate)
pci_bus_save_and_disable_locked(dev->subordinate);
}
This will iterate through all devices under the current bus and execute
err_handler->reset_prepare(), causing two devices of the hibmcge driver
to sequentially request the rtnl_lock, leading to a deadlock.
Since the driver now executes netif_device_detach()
before the reset process, it will not concurrently with
other netdev APIs, so there is no need to hold the rtnl_lock now.
Therefore, this patch removes the rtnl_lock during the reset process and
adjusts the position of HBG_NIC_STATE_RESETTING to ensure
that multiple resets are not executed concurrently. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval
Getting / Setting the frame interval using the V4L2 subdev pad ops
get_frame_interval/set_frame_interval causes a deadlock, as the
subdev state is locked in the [1] but also in the driver itself.
In [2] it's described that the caller is responsible to acquire and
release the lock in this case. Therefore, acquiring the lock in the
driver is wrong.
Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval()
and mt9m114_ifp_set_frame_interval().
[1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129
[2] Documentation/driver-api/media/v4l2-subdev.rst |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Optimize module load time by optimizing PLT/GOT counting
When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and
CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock,
the relevant logs are as follows:
rcu: INFO: rcu_sched self-detected stall on CPU
...
Call Trace:
[<900000000024f9e4>] show_stack+0x5c/0x180
[<90000000002482f4>] dump_stack_lvl+0x94/0xbc
[<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280
[<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88
[<9000000000396c34>] update_process_times+0xb4/0x150
[<90000000003b2474>] tick_nohz_handler+0xf4/0x250
[<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428
[<9000000000399b2c>] hrtimer_interrupt+0x214/0x538
[<9000000000253634>] constant_timer_interrupt+0x64/0x80
[<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0
[<9000000000349a78>] handle_irq_event_percpu+0x18/0x88
[<9000000000354c00>] handle_percpu_irq+0x90/0xf0
[<9000000000348c74>] handle_irq_desc+0x94/0xb8
[<9000000001012b28>] handle_cpu_irq+0x68/0xa0
[<9000000001def8c0>] handle_loongarch_irq+0x30/0x48
[<9000000001def958>] do_vint+0x80/0xd0
[<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0
[<90000000006344f4>] __asan_load8+0x4c/0x120
[<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8
[<90000000003895f0>] load_module+0x9e0/0x2958
[<900000000038b770>] __do_sys_init_module+0x208/0x2d0
[<9000000001df0c34>] do_syscall+0x94/0x190
[<900000000024d6fc>] handle_syscall+0xbc/0x158
After analysis, this is because the slow speed of loading the amdgpu
module leads to the long time occupation of the cpu and then the soft
deadlock.
When loading a module, module_frob_arch_sections() tries to figure out
the number of PLTs/GOTs that will be needed to handle all the RELAs. It
will call the count_max_entries() to find in an out-of-order date which
counting algorithm has O(n^2) complexity.
To make it faster, we sort the relocation list by info and addend. That
way, to check for a duplicate relocation, it just needs to compare with
the previous entry. This reduces the complexity of the algorithm to O(n
log n), as done in commit d4e0340919fb ("arm64/module: Optimize module
load time by optimizing PLT counting"). This gives sinificant reduction
in module load time for modules with large number of relocations.
After applying this patch, the soft deadlock problem has been solved,
and the kernel starts normally without "Call Trace".
Using the default configuration to test some modules, the results are as
follows:
Module Size
ip_tables 36K
fat 143K
radeon 2.5MB
amdgpu 16MB
Without this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 54 1221/84
amdgpu 1411 4525/1098
With this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 22 1221/84
amdgpu 45 4525/1098 |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix lockdep warning during rmmod
The commit under the Fixes tag added a netdev_assert_locked() in
bnxt_free_ntp_fltrs(). The lock should be held during normal run-time
but the assert will be triggered (see below) during bnxt_remove_one()
which should not need the lock. The netdev is already unregistered by
then. Fix it by calling netdev_assert_locked_or_invisible() which will
not assert if the netdev is unregistered.
WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re]
CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa92082387da0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf
RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3
R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001
R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100
FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0
Call Trace:
<TASK>
bnxt_remove_one+0x57/0x180 [bnxt_en]
pci_device_remove+0x39/0xc0
device_release_driver_internal+0xa5/0x130
driver_detach+0x42/0x90
bus_remove_driver+0x61/0xc0
pci_unregister_driver+0x38/0x90
bnxt_exit+0xc/0x7d0 [bnxt_en] |
| In the Linux kernel, the following vulnerability has been resolved:
dm: dm-crypt: Do not partially accept write BIOs with zoned targets
Read and write operations issued to a dm-crypt target may be split
according to the dm-crypt internal limits defined by the max_read_size
and max_write_size module parameters (default is 128 KB). The intent is
to improve processing time of large BIOs by splitting them into smaller
operations that can be parallelized on different CPUs.
For zoned dm-crypt targets, this BIO splitting is still done but without
the parallel execution to ensure that the issuing order of write
operations to the underlying devices remains sequential. However, the
splitting itself causes other problems:
1) Since dm-crypt relies on the block layer zone write plugging to
handle zone append emulation using regular write operations, the
reminder of a split write BIO will always be plugged into the target
zone write plugged. Once the on-going write BIO finishes, this
reminder BIO is unplugged and issued from the zone write plug work.
If this reminder BIO itself needs to be split, the reminder will be
re-issued and plugged again, but that causes a call to a
blk_queue_enter(), which may block if a queue freeze operation was
initiated. This results in a deadlock as DM submission still holds
BIOs that the queue freeze side is waiting for.
2) dm-crypt relies on the emulation done by the block layer using
regular write operations for processing zone append operations. This
still requires to properly return the written sector as the BIO
sector of the original BIO. However, this can be done correctly only
and only if there is a single clone BIO used for processing the
original zone append operation issued by the user. If the size of a
zone append operation is larger than dm-crypt max_write_size, then
the orginal BIO will be split and processed as a chain of regular
write operations. Such chaining result in an incorrect written sector
being returned to the zone append issuer using the original BIO
sector. This in turn results in file system data corruptions using
xfs or btrfs.
Fix this by modifying get_max_request_size() to always return the size
of the BIO to avoid it being split with dm_accpet_partial_bio() in
crypt_map(). get_max_request_size() is renamed to
get_max_request_sectors() to clarify the unit of the value returned
and its interface is changed to take a struct dm_target pointer and a
pointer to the struct bio being processed. In addition to this change,
to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt
device max_hw_sectors limit to be at most
BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture).
This forces DM core to split write BIOs before passing them to
crypt_map(), and thus guaranteeing that dm-crypt can always accept an
entire write BIO without needing to split it.
This change does not have any effect on the read path of dm-crypt. Read
operations can still be split and the BIO fragments processed in
parallel. There is also no impact on the performance of the write path
given that all zone write BIOs were already processed inline instead of
in parallel.
This change also does not affect in any way regular dm-crypt block
devices. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential deadlock when releasing mids
All release_mid() callers seem to hold a reference of @mid so there is
no need to call kref_put(&mid->refcount, __release_mid) under
@server->mid_lock spinlock. If they don't, then an use-after-free bug
would have occurred anyways.
By getting rid of such spinlock also fixes a potential deadlock as
shown below
CPU 0 CPU 1
------------------------------------------------------------------
cifs_demultiplex_thread() cifs_debug_data_proc_show()
release_mid()
spin_lock(&server->mid_lock);
spin_lock(&cifs_tcp_ses_lock)
spin_lock(&server->mid_lock)
__release_mid()
smb2_find_smb_tcon()
spin_lock(&cifs_tcp_ses_lock) *deadlock* |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid deadlock in fs reclaim with page writeback
Ext4 has a filesystem wide lock protecting ext4_writepages() calls to
avoid races with switching of journalled data flag or inode format. This
lock can however cause a deadlock like:
CPU0 CPU1
ext4_writepages()
percpu_down_read(sbi->s_writepages_rwsem);
ext4_change_inode_journal_flag()
percpu_down_write(sbi->s_writepages_rwsem);
- blocks, all readers block from now on
ext4_do_writepages()
ext4_init_io_end()
kmem_cache_zalloc(io_end_cachep, GFP_KERNEL)
fs_reclaim frees dentry...
dentry_unlink_inode()
iput() - last ref =>
iput_final() - inode dirty =>
write_inode_now()...
ext4_writepages() tries to acquire sbi->s_writepages_rwsem
and blocks forever
Make sure we cannot recurse into filesystem reclaim from writeback code
to avoid the deadlock. |
| The gh package before 1.5.0 for R delivers an HTTP response in a data structure that includes the Authorization header from the corresponding HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: prevent soft lockup while flush writes
Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.
Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:
watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]
Call Trace:
<TASK>
call_rcu+0x16/0x20
put_object+0x41/0x80
__delete_object+0x50/0x90
delete_object_full+0x2b/0x40
kmemleak_free+0x46/0xa0
slab_free_freelist_hook.constprop.0+0xed/0x1a0
kmem_cache_free+0xfd/0x300
mempool_free_slab+0x1f/0x30
mempool_free+0x3a/0x100
bio_free+0x59/0x80
bio_put+0xcf/0x2c0
free_r10bio+0xbf/0xf0
raid_end_bio_io+0x78/0xb0
one_write_done+0x8a/0xa0
raid10_end_write_request+0x1b4/0x430
bio_endio+0x175/0x320
brd_submit_bio+0x3b9/0x9b7 [brd]
__submit_bio+0x69/0xe0
submit_bio_noacct_nocheck+0x1e6/0x5a0
submit_bio_noacct+0x38c/0x7e0
flush_pending_writes+0xf0/0x240
raid10d+0xac/0x1ed0
Fix the problem by adding cond_resched() to raid10 like what raid1 did.
Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad. |
| In the Linux kernel, the following vulnerability has been resolved:
e1000: Move cancel_work_sync to avoid deadlock
Previously, e1000_down called cancel_work_sync for the e1000 reset task
(via e1000_down_and_stop), which takes RTNL.
As reported by users and syzbot, a deadlock is possible in the following
scenario:
CPU 0:
- RTNL is held
- e1000_close
- e1000_down
- cancel_work_sync (cancel / wait for e1000_reset_task())
CPU 1:
- process_one_work
- e1000_reset_task
- take RTNL
To remedy this, avoid calling cancel_work_sync from e1000_down
(e1000_reset_task does nothing if the device is down anyway). Instead,
call cancel_work_sync for e1000_reset_task when the device is being
removed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential deadlock when reconnecting channels
Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order
and prevent the following deadlock from happening
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3-build2+ #1301 Tainted: G S W
------------------------------------------------------
cifsd/6055 is trying to acquire lock:
ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200
but task is already holding lock:
ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&ret_buf->chan_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_setup_session+0x81/0x4b0
cifs_get_smb_ses+0x771/0x900
cifs_mount_get_session+0x7e/0x170
cifs_mount+0x92/0x2d0
cifs_smb3_do_mount+0x161/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&ret_buf->ses_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_match_super+0x101/0x320
sget+0xab/0x270
cifs_smb3_do_mount+0x1e0/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}:
check_noncircular+0x95/0xc0
check_prev_add+0x115/0x2f0
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_signal_cifsd_for_reconnect+0x134/0x200
__cifs_reconnect+0x8f/0x500
cifs_handle_standard+0x112/0x280
cifs_demultiplex_thread+0x64d/0xbc0
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
&tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ret_buf->chan_lock);
lock(&ret_buf->ses_lock);
lock(&ret_buf->chan_lock);
lock(&tcp_ses->srv_lock);
*** DEADLOCK ***
3 locks held by cifsd/6055:
#0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200
#1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200
#2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: move notifier's packet_dev_mc out of rcu critical section
Syzkaller reports the following issue:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578
__mutex_lock+0x106/0xe80 kernel/locking/mutex.c:746
team_change_rx_flags+0x38/0x220 drivers/net/team/team_core.c:1781
dev_change_rx_flags net/core/dev.c:9145 [inline]
__dev_set_promiscuity+0x3f8/0x590 net/core/dev.c:9189
netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201
dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286 packet_dev_mc net/packet/af_packet.c:3698 [inline]
packet_dev_mclist_delete net/packet/af_packet.c:3722 [inline]
packet_notifier+0x292/0xa60 net/packet/af_packet.c:4247
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2214 [inline]
call_netdevice_notifiers net/core/dev.c:2228 [inline]
unregister_netdevice_many_notify+0x15d8/0x2330 net/core/dev.c:11972
rtnl_delete_link net/core/rtnetlink.c:3522 [inline]
rtnl_dellink+0x488/0x710 net/core/rtnetlink.c:3564
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534
Calling `PACKET_ADD_MEMBERSHIP` on an ops-locked device can trigger
the `NETDEV_UNREGISTER` notifier, which may require disabling promiscuous
and/or allmulti mode. Both of these operations require acquiring
the netdev instance lock.
Move the call to `packet_dev_mc` outside of the RCU critical section.
The `mclist` modifications (add, del, flush, unregister) are protected by
the RTNL, not the RCU. The RCU only protects the `sklist` and its
associated `sks`. The delayed operation on the `mclist` entry remains
within the RTNL. |
| A flaw was found in openshift-gitops-operator-container. The openshift.io/cluster-monitoring label is applied to all namespaces that deploy an ArgoCD CR instance, allowing the namespace to create a rogue PrometheusRule. This issue can have adverse effects on the platform monitoring stack, as the rule is rolled out cluster-wide when the label is applied. |
| A denial of service vulnerability was found in tipc_crypto_key_revoke in net/tipc/crypto.c in the Linux kernel’s TIPC subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. |
| A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. |
| A flaw was found In 3Scale Admin Portal. If a user logs out from the personal tokens page and then presses the back button in the browser, the tokens page is rendered from the browser cache. |
