| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate PMSR FTM preamble range
PMSR FTM request parsing accepts preamble values outside the
enumerated nl80211 preamble range.
Reject out-of-range values before using them in the parser capability
bit test using the policy.
[drop unnecessary check] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: printer: fix infinite loop in printer_read()
printer_read() uses the same variable for the requested copy size and
the number of bytes actually copied to user space. copy_to_user()
returns the number of bytes not copied, so when it fails to copy
anything, the computed copied length becomes zero.
In that case len, buf, current_rx_bytes and current_rx_buf are left
unchanged. If RX data is available and the user buffer remains
unwritable, the read loop can repeat indefinitely.
Track the copied length separately and return -EFAULT, or the number of
bytes already copied, if an iteration makes no progress. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix infinite loop in __tipc_nl_compat_dumpit
cmd->dumpit callback can return a negative errno, causing an infinite
loop due to the while(len) condition. As the loop never terminates,
genl_mutex is never released, and other tasks waiting on it starve in D
state.
Check dumpit's return value, propagate it and jump to err_out on error. |
| MyBB is free and open source forum software. Prior to 1.8.40, the built-in CAPTCHA does not consistently enforce single-use semantics, allowing remote attackers to bypass CAPTCHA controls through challenge replay. The successful validation paths in contact.php, member.php?action=do_resendactivation, member.php?action=do_lostpw, member.php?action=do_emailuser, and sendthread.php?action=do_sendtofriend do not call captcha::invalidate_captcha() for the MyBB Default CAPTCHA selected by the captchaimage setting. A valid response can therefore be reused until a non-vulnerable endpoint invalidates it, an incorrect response is submitted, or the challenge expires. This issue is fixed in version 1.8.40. |
| A flaw was found in libcupsfilters. The cfIEEE1284NormalizeMakeModel() function enters an infinite loop when processing a printer-advertised IEEE-1284 device ID with an empty model field, causing sustained CPU consumption. A network-adjacent attacker could exploit this by broadcasting a specially crafted printer advertisement, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: skip extent mft records in writeback to prevent deadlock
This patch fixes the ABBA deadlock between extent_lock and extent
mrec_lock triggered by xfstests generic/113, that occurs since the commit
6994acf33bae ("ntfs: use base mft_no when looking up base inode for
extent record").
Path A (inode writeback):
VFS writeback
-> ntfs_write_inode()
-> __ntfs_write_inode()
-> mutex_lock(&ni->extent_lock)
-> mutex_lock(&tni->mrec_lock)
Path B (MFT folio writeback):
VFS writeback of $MFT dirty folios
-> ntfs_mft_writepages()
-> ntfs_write_mft_block()
-> ntfs_may_write_mft_record()
-> holds one extent mrec_lock from a previous iteration
-> tries to acquire another base inode extent_lock
By removing all extent_lock and extent mrec_lock acquisition from the MFT
folio writeback path, the ABBA lock ordering is eliminated:
Path A: __ntfs_write_inode(): extent_lock -> mrec_lock
Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock
Path B is always redundant for extent records because:
1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio.
It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty
via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A.
Therefore, normal extent modifications never create a situation where
the MFT folio is dirty and Path B is not scheduled.
2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside
ntfs_mft_record_alloc(). But all identified callers in attrib.c
(ntfs_attr_add, ntfs_attr_record_move_away,
ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through
with mark_mft_record_dirty(), which triggers Path A to write the
complete record.
3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent
inodes, ensuring all dirty extents are flushed via Path A before the
base inode leaves the icache. |
| A flaw was found in libssh. Logic errors in automatic certificate-based public key authentication can cause libssh clients to loop indefinitely when configured certificates are missing or repeatedly rejected by a server, leading to denial of service. |
| MyBB is free and open source forum software. Prior to 1.8.40, the Contact module does not validate a redirect URL or protocol correctly, resulting in an open redirect and reflected JavaScript code injection. contact.php accepts the redirect target from the from HTTP parameter in $mybb->input['from'] or the Referer HTTP header in $_SERVER['HTTP_REFERER'] and passes it to redirect() without sufficient verification. A javascript: URI becomes the target of the `Click here if you don't want to wait any longer` link because $force_redirect is true, allowing script execution when a victim selects the link. This issue is fixed in version 1.8.40. |
| Trilium Notes is a cross-platform, hierarchical note taking application focused on building large personal knowledge bases. Prior to 0.103.0, the #iconClass label value is returned raw by getNoteIcon() and inserted without HTML attribute encoding into class attributes in apps/client/src/widgets/quick_search.ts and apps/client/src/services/note_autocomplete.ts, allowing a stored payload to execute automatically when a victim opens a new tab or uses Ctrl+J and, because Electron enables nodeIntegration and disables contextIsolation, run operating-system commands as the victim. This issue is fixed in version 0.103.0. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 is vulnerable to a denial of service attack. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Prevent PM resume deadlock in hwctx_sync_debug_bo()
amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo()
callback while holding xdna->dev_lock.
The callback may call amdxdna_cmd_submit(), which in turn calls
amdxdna_pm_resume_get(). If the device is suspended,
amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(),
which also acquires xdna->dev_lock, resulting in a deadlock.
Avoid the deadlock by calling amdxdna_pm_resume_get() before holding
xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and
amdxdna_drm_config_hwctx_ioctl() |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fail attrlist updates when the superblock is inactive
generic_shutdown_super() clears SB_ACTIVE before evicting cached inodes.
If eviction selects the fake inode for a base inode's unnamed
$ATTRIBUTE_LIST attribute, ntfs_evict_big_inode() drops the fake inode's
reference on the base inode while the fake inode is still hashed and marked
I_FREEING.
That iput can synchronously write back the base inode. The writeback path
may update mapping pairs and call ntfs_attrlist_update(), which
unconditionally calls ntfs_attr_iget() for the same $ATTRIBUTE_LIST fake
inode. VFS then finds the I_FREEING inode and waits for eviction to finish,
but the current task is still inside that eviction path, causing a
self-deadlock in find_inode().
Fix this by mirroring the teardown guard used by __ntfs_write_inode():
once SB_ACTIVE has been cleared, do not try to iget the attribute-list
fake inode. Return -EIO so teardown aborts the update instead of waiting on
the inode it is evicting. |
| A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix a bug if the bio is out of limits
If dm_integrity_check_limits fails, the code would exit with
DM_MAPIO_KILL. However, the range would be already locked at this point,
and it wouldn't be unlocked, resulting in a deadlock. Let's move the
limit check up, so that when it exits, no resources are leaked. |
| Zeroconf is a pure Python implementation of multicast DNS service discovery. Prior to 0.149.5, DNSIncoming._decode_labels_at_offset recurses once per DNS-name compression pointer, and a single mDNS packet carrying chained pointers can trigger a RecursionError that escapes DNSIncoming.__init__, causing sustained CPU burn, log flooding, and degraded mDNS-dependent features for unauthenticated hosts on the local link over UDP/5353 (224.0.0.251 / ff02::fb). This issue is fixed in version 0.149.5. |
| An issue was discovered in Django 5.2 before 5.2.17 and 6.0 before 6.0.8.
`django.contrib.admin.utils.display_for_field()` renders `URLField` values as clickable links in the admin without validating the URL. A value stored with an unsafe scheme is displayed as a link on changelist and read-only admin pages, which allows cross-site scripting against staff users who click the link.
Exploitation requires the unsafe value to already be stored in the database. `URLField` validation through a `ModelForm` or the admin rejects unsafe schemes, so this affects applications that persist `URLField` data without running model validation, for example through direct queryset writes, deserialization, or bulk import of untrusted input.
Django would like to thank Egor Saltykov for reporting this issue. |
| In JetBrains Ktor before 3.4.1 potential DoS attack via WebSocket decompression was possible |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix mrec_lock ABBA deadlock in rename
ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an
inode's mrec_lock before taking the mrec_lock of its parent directory.
ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock
before taking new_ni->mrec_lock for an existing target, or
new_dir_ni->mrec_lock for a cross-directory rename.
This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds
the target inode, or when ntfs_dir_fsync() holds a child target
directory, while rename() holds the parent directory and waits for the
target.
Fix this by locking the existing target inode before taking any parent
directory mrec_lock. For cross-directory renames where the target parent
is a descendant of the source parent, lock the target parent before the
source parent so the directory order matches the child-to-parent order used
by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode(). |
