| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164. |
| A vulnerability in the management of shell user accounts for Cisco Policy Suite (CPS) Software for CPS appliances could allow an authenticated, local attacker to gain elevated privileges on an affected system. The affected privilege level is not at the root level. The vulnerability is due to incorrect role-based access control (RBAC) for shell user accounts. An attacker could exploit this vulnerability by authenticating to an affected appliance and providing crafted user input via the CLI. A successful exploit could allow the attacker to acquire a higher privilege level than should have been granted. To exploit this vulnerability, the attacker must log in to the appliance with valid credentials. Cisco Bug IDs: CSCve37724. Known Affected Releases: 9.0.0, 9.1.0, 10.0.0, 11.0.0, 12.0.0. |
| A vulnerability in SNMP polling for the Cisco Web Security Appliance (WSA), Email Security Appliance (ESA), and Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to discover confidential information about the appliances that should be available only to an administrative user. The vulnerability occurs because the appliances do not protect confidential information at rest in response to Simple Network Management Protocol (SNMP) poll requests. An attacker could exploit this vulnerability by doing a crafted SNMP poll request to the targeted security appliance. An exploit could allow the attacker to discover confidential information that should be restricted, and the attacker could use this information to conduct additional reconnaissance. The attacker must know the configured SNMP community string to exploit this vulnerability. Cisco Bug IDs: CSCve26106, CSCve26202, CSCve26224. Known Affected Releases: 10.0.0-230 (Web Security Appliance), 9.7.2-065 (Email Security Appliance), and 10.1.0-037 (Content Security Management Appliance). |
| A vulnerability in the web interface of the Cisco RV340, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to Cisco WebEx Meetings not sufficiently protecting sensitive data when responding to an HTTP request to the web interface. An attacker could exploit the vulnerability by attempting to use the HTTP protocol and looking at the data in the HTTP responses from the Cisco WebEx Meetings Server. An exploit could allow the attacker to find sensitive information about the application. Cisco Bug IDs: CSCve37988. Known Affected Releases: firmware 1.0.0.30, 1.0.0.33, 1.0.1.9, 1.0.1.16. |
| A vulnerability in configuration modification permissions validation for Cisco Unified Communications Manager could allow an authenticated, remote attacker to perform a horizontal privilege escalation where one user can modify another user's configuration. The vulnerability is due to lack of proper Role Based Access Control (RBAC) when certain user configuration changes are requested. An attacker could exploit this vulnerability by sending an authenticated, crafted HTTP request to the targeted application. An exploit could allow the attacker to impact the integrity of the application where one user can modify the configuration of another user's information. Cisco Bug IDs: CSCve27331. Known Affected Releases: 10.5(2.10000.5), 11.0(1.10000.10), 11.5(1.10000.6). |
| A vulnerability in the Cisco Unified Intelligence Center web interface could allow an unauthenticated, remote attacker to impact the integrity of the system by executing a Document Object Model (DOM)-based, environment or client-side cross-site scripting (XSS) attack. The vulnerability occurs because user-supplied data in the DOM input is not validated. An attacker could exploit this vulnerability by sending crafted URLs that contain malicious DOM statements to the affected system. A successful exploit could allow the attacker to affect the integrity of the system by manipulating the database. Known Affected Releases 11.0(1)ES10. Cisco Bug IDs: CSCvf18325. |
| A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830. |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device. Cisco Bug IDs: CSCvf10783. |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. Cisco Bug IDs: CSCve48949. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows remote attackers to execute arbitrary code via a specific (but unstated) exposed service. NOTE: the scope of this CVE does NOT include the concept of "Unnecessary Services" in general; the scope is only a single service that is unnecessarily exposed, leading to remote code execution. The details of that service might be disclosed at a later date. |
| A vulnerability in the ICMP ingress packet processing of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause the TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation for the size of a received ICMP packet. An attacker could exploit this vulnerability by sending a crafted ICMP packet to the local IP address of the targeted endpoint. A successful exploit could allow the attacker to cause a DoS of the TelePresence endpoint, during which time calls could be dropped. This vulnerability would affect either IPv4 or IPv6 ICMP traffic. This vulnerability affects the following Cisco TelePresence products when running software release CE8.1.1, CE8.2.0, CE8.2.1, CE8.2.2, CE 8.3.0, or CE8.3.1: Spark Room OS, TelePresence DX Series, TelePresence MX Series, TelePresence SX Quick Set Series, TelePresence SX Series. Cisco Bug IDs: CSCvb95396. |
| A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455. |
| A vulnerability in Intermediate System-to-Intermediate System (IS-IS) protocol packet processing of Cisco Nexus 5000, 6000, and 7000 Series Switches software could allow an unauthenticated, adjacent attacker to cause a reload of the affected device. Switches in the FabricPath domain crash because of an __inst_001__isis_fabricpath hap reset when processing a crafted link-state packet. More Information: CSCvc45002. Known Affected Releases: 7.1(3)N1(2.1) 7.1(3)N1(3.12) 7.3(2)N1(0.296) 8.0(1)S2. Known Fixed Releases: 6.2(18)S11 7.0(3)I5(1.170) 7.0(3)I5(2) 7.1(4)N1(0.4) 7.1(4)N1(1b) 7.1(5)N1(0.986) 7.1(5)N1(1) 7.2(3)D1(0.8) 7.3(2)N1(0.304) 7.3(2)N1(1) 8.0(0.96)S0 8.0(1) 8.0(1)E1 8.0(1)S4 8.3(0)CV(0.788). |
| A vulnerability in the web-based GUI of Cisco UCS Director 6.0.0.0 and 6.0.0.1 could allow an authenticated, local attacker to execute arbitrary workflow items with just an end-user profile, a Privilege Escalation Vulnerability. The vulnerability is due to improper role-based access control (RBAC) after the Developer Menu is enabled in Cisco UCS Director. An attacker could exploit this vulnerability by enabling Developer Mode for his/her user profile with an end-user profile and then adding new catalogs with arbitrary workflow items to his/her profile. An exploit could allow an attacker to perform any actions defined by these workflow items, including actions affecting other tenants. Cisco Bug IDs: CSCvb64765. |
| A vulnerability in the content scanning engine of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to bypass configured message or content filters on the device. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. More Information: CSCuz16076. Known Affected Releases: 9.7.1-066 9.7.1-HP2-207 9.8.5-085. Known Fixed Releases: 10.0.1-083 10.0.1-087. |
| A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321. |
| A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675. |
| A vulnerability in the received packet parser of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) software could allow an unauthenticated, remote attacker to cause a reload of the affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient size validation of user-supplied data. An attacker could exploit this vulnerability by sending crafted H.224 data in Real-Time Transport Protocol (RTP) packets in an H.323 call. An exploit could allow the attacker to overflow a buffer in a cache that belongs to the received packet parser, which will result in a crash of the application, resulting in a DoS condition. All versions of Cisco Expressway Series Software and Cisco TelePresence VCS Software prior to version X8.8.2 are vulnerable. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCus99263. |
| A vulnerability in the handling of IP fragments for the Cisco Small Business SPA300, SPA500, and SPA51x Series IP Phones could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to the inability to handle many large IP fragments for reassembly in a short duration. An attacker could exploit this vulnerability by sending a crafted stream of IP fragments to the targeted device. An exploit could allow the attacker to cause a DoS condition when the device unexpectedly reloads. Cisco Bug IDs: CSCve82586. |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. |
