| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix regmap init error handling
devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL.
Fix the error check and also fix the error message. Use the error code
from ERR_PTR() instead of the wrong value in ret. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: reject mount if bigalloc with s_first_data_block != 0
bigalloc with s_first_data_block != 0 is not supported, reject mounting
it. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix race between concurrent split and refault
The splitting of a PUD entry in walk_pud_range() can race with a
concurrent thread refaulting the PUD leaf entry causing it to try walking
a PMD range that has disappeared.
An example and reproduction of this is to try reading numa_maps of a
process while VFIO-PCI is setting up DMA (specifically the
vfio_pin_pages_remote call) on a large BAR for that process.
This will trigger a kernel BUG:
vfio-pci 0000:03:00.0: enabling device (0000 -> 0002)
BUG: unable to handle page fault for address: ffffa23980000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
...
RIP: 0010:walk_pgd_range+0x3b5/0x7a0
Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24
28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06
9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74
RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287
RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0
RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000
R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000
R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000
FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
__walk_page_range+0x195/0x1b0
walk_page_vma+0x62/0xc0
show_numa_map+0x12b/0x3b0
seq_read_iter+0x297/0x440
seq_read+0x11d/0x140
vfs_read+0xc2/0x340
ksys_read+0x5f/0xe0
do_syscall_64+0x68/0x130
? get_page_from_freelist+0x5c2/0x17e0
? mas_store_prealloc+0x17e/0x360
? vma_set_page_prot+0x4c/0xa0
? __alloc_pages_noprof+0x14e/0x2d0
? __mod_memcg_lruvec_state+0x8d/0x140
? __lruvec_stat_mod_folio+0x76/0xb0
? __folio_mod_stat+0x26/0x80
? do_anonymous_page+0x705/0x900
? __handle_mm_fault+0xa8d/0x1000
? __count_memcg_events+0x53/0xf0
? handle_mm_fault+0xa5/0x360
? do_user_addr_fault+0x342/0x640
? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0
? irqentry_exit_to_user_mode+0x24/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe88464f47e
Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f
84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00
f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e
RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003
RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000
R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
Fix this by validating the PUD entry in walk_pmd_range() using a stable
snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the
walk via ACTION_AGAIN instead of descending further. This mirrors the
retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the
PTE is not being got by pte_offset_map_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: fix invalid folio access when i_blkbits differs from I/O granularity
Commit aa35dd5cbc06 ("iomap: fix invalid folio access after
folio_end_read()") partially addressed invalid folio access for folios
without an ifs attached, but it did not handle the case where
1 << inode->i_blkbits matches the folio size but is different from the
granularity used for the IO, which means IO can be submitted for less
than the full folio for the !ifs case.
In this case, the condition:
if (*bytes_submitted == folio_len)
ctx->cur_folio = NULL;
in iomap_read_folio_iter() will not invalidate ctx->cur_folio, and
iomap_read_end() will still be called on the folio even though the IO
helper owns it and will finish the read on it.
Fix this by unconditionally invalidating ctx->cur_folio for the !ifs
case. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()
A malicious or compromised VIO server can return a num_written value in the
discover targets MAD response that exceeds max_targets. This value is
stored directly in vhost->num_targets without validation, and is then used
as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which
is only allocated for max_targets entries. Indices at or beyond max_targets
access kernel memory outside the DMA-coherent allocation. The
out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI
MADs that are sent back to the VIO server, leaking kernel memory.
Fix by clamping num_written to max_targets before storing it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Fix use-after-free in migration restore
When an error is returned from xe_sriov_pf_migration_restore_produce(),
the data pointer is not set to NULL, which can trigger use-after-free
in subsequent .write() calls.
Set the pointer to NULL upon error to fix the problem.
(cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819) |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix double free of WoL irq
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb
Before using sk pointer, check if it is null.
Fix the following:
KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267]
CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025
Workqueue: events l2cap_info_timeout
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
veth0_macvtap: entered promiscuous mode
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0
PKRU: 55555554
Call Trace:
<TASK>
__kasan_check_byte+0x12/0x40
lock_acquire+0x79/0x2e0
lock_sock_nested+0x48/0x100
? l2cap_sock_ready_cb+0x46/0x160
l2cap_sock_ready_cb+0x46/0x160
l2cap_conn_start+0x779/0xff0
? __pfx_l2cap_conn_start+0x10/0x10
? l2cap_info_timeout+0x60/0xa0
? __pfx___mutex_lock+0x10/0x10
l2cap_info_timeout+0x68/0xa0
? process_scheduled_works+0xa8d/0x18c0
process_scheduled_works+0xb6e/0x18c0
? __pfx_process_scheduled_works+0x10/0x10
? assign_work+0x3d5/0x5e0
worker_thread+0xa53/0xfc0
kthread+0x388/0x470
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x51e/0xb90
? __pfx_ret_from_fork+0x10/0x10
veth1_macvtap: entered promiscuous mode
? __switch_to+0xc7d/0x1450
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
batman_adv: batadv0: Interface activated: batadv_slave_0
batman_adv: batadv0: Interface activated: batadv_slave_1
netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
ieee80211 phy39: Selected rate control algorithm 'minstrel_ht'
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: prevent policy_hthresh.work from racing with netns teardown
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.
The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.
xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.
Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the
queued work cannot outlive the net namespace teardown and access a
freed struct net. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner
packet 'newskb' that is being reassembled. First a zero-copy approach is
tried if it succeeds then newskb becomes non-linear.
When a subsequent fragment in the same datagram does not meet the
fast-path conditions, a memory copy is performed. It calls skb_put() to
append the data and as newskb is non-linear it triggers
SKB_LINEAR_ASSERT check.
Oops: invalid opcode: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:skb_put+0x3c/0x40
[...]
Call Trace:
<IRQ>
iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs]
iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs]
iptfs_input+0x122/0x3e0 [xfrm_iptfs]
xfrm_input+0x91e/0x1a50
xfrm4_esp_rcv+0x3a/0x110
ip_protocol_deliver_rcu+0x1d7/0x1f0
ip_local_deliver_finish+0xbe/0x1e0
__netif_receive_skb_core.constprop.0+0xb56/0x1120
__netif_receive_skb_list_core+0x133/0x2b0
netif_receive_skb_list_internal+0x1ff/0x3f0
napi_complete_done+0x81/0x220
virtnet_poll+0x9d6/0x116e [virtio_net]
__napi_poll.constprop.0+0x2b/0x270
net_rx_action+0x162/0x360
handle_softirqs+0xdc/0x510
__irq_exit_rcu+0xe7/0x110
irq_exit_rcu+0xe/0x20
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
Fix this by checking if the skb is non-linear. If it is, linearize it by
calling skb_linearize(). As the initial allocation of newskb originally
reserved enough tailroom for the entire reassembled packet we do not
need to check if we have enough tailroom or extend it. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) Protect regulator operations with mutex
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 |
| SocialEngine versions 7.8.0 and prior contain a SQL injection vulnerability in the /activity/index/get-memberall endpoint where user-supplied input passed via the text parameter is not sanitized before being incorporated into a SQL query. An unauthenticated remote attacker can exploit this vulnerability to read arbitrary data from the database, reset administrator account passwords, and gain unauthorized access to the Packages Manager in the Admin Panel, potentially enabling remote code execution. |
| Froxlor is open source server administration software. Prior to version 2.3.6, in `EmailSender::add()`, the domain ownership validation for full email sender aliases uses the wrong array index when splitting the email address, passing the local part instead of the domain to `validateLocalDomainOwnership()`. This causes the ownership check to always pass for non-existent "domains," allowing any authenticated customer to add sender aliases for email addresses on domains belonging to other customers. Postfix's `sender_login_maps` then authorizes the attacker to send emails as those addresses. Version 2.3.6 fixes the issue. |
| Froxlor is open source server administration software. Prior to version 2.3.6, the Froxlor API endpoint `Customers.update` (and `Admins.update`) does not validate the `def_language` parameter against the list of available language files. An authenticated customer can set `def_language` to a path traversal payload (e.g., `../../../../../var/customers/webs/customer1/evil`), which is stored in the database. On subsequent requests, `Language::loadLanguage()` constructs a file path using this value and executes it via `require`, achieving arbitrary PHP code execution as the web server user. Version 2.3.6 fixes the issue. |
| Paperclip is a Node.js server and React UI that orchestrates a team of AI agents to run a business. Versions of @paperclipai/server prior to 2026.416.0 contain a privilege escalation vulnerability that allows an attacker with an Agent API key to execute arbitrary OS commands on the Paperclip server host. An attacker with an agent credential can escalate privileges from the agent runtime to the Paperclip server host. The vulnerability occurs because agents are allowed to update their own adapterConfig via the /agents/:id API endpoint. The configuration field adapterConfig.workspaceStrategy.provisionCommand is later executed by the server runtime. As a result, an attacker controlling an agent credential can inject arbitrary shell commands which are executed by the Paperclip server during workspace provisioning. This breaks the intended trust boundary between agent runtime configuration and server host execution, allowing a compromised or malicious agent to escalate privileges and run commands on the host system. This vulnerability allows remote code execution on the server host. @paperclipai/server version 2026.416.0 fixes the issue. |
| Rclone is a command-line program to sync files and directories to and from different cloud storage providers. The RC endpoint `options/set` is exposed without `AuthRequired: true`, but it can mutate global runtime configuration, including the RC option block itself. Starting in version 1.45.0 and prior to version 1.73.5, an unauthenticated attacker can set `rc.NoAuth=true`, which disables the authorization gate for many RC methods registered with `AuthRequired: true` on reachable RC servers that are started without global HTTP authentication. This can lead to unauthorized access to sensitive administrative functionality, including configuration and operational RC methods. Version 1.73.5 patches the issue. |
| Squidex is an open source headless content management system and content management hub. Prior to version 7.23.0, the `RestoreController.PostRestoreJob` endpoint allows an administrator to supply an arbitrary URL for downloading backup archives. This URL is fetched using the "Backup" `HttpClient` without any SSRF protection. A malicious or compromised admin can use this endpoint to probe internal network services, access cloud metadata endpoints, or perform internal reconnaissance. The vulnerability is authenticated (Admin-only) but highly impactful, allowing potential access to sensitive internal resources. Version 7.23.0 contains a fix. |
