| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_compat: ebtables emulation must reject non-bridge targets
xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so
on. ebtables targets return incompatible verdicts: EBT_ACCEPT,
EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC.
ebtables doesn't permit this since
11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets")
but that commit missed the nft_compat layer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix type confusion of dst_entry
IOAM uses a dummy dst_entry(null_dst) to mark that the destination should
not be changed after the transformation. This dst is stored in the IOAM lwt
state and may be passed to dst_cache_set_ip6().
However, the IPv6 dst cache path eventually calls rt6_get_cookie(), which
treats the dst_entry as part of a struct rt6_info. Since the null_dst was
embedded directly as a struct dst_entry in struct ioam6_lwt, this resulted
in an invalid cast and rt6_get_cookie() reading fields from the wrong
object.
In practice, the wrong cookie is not used while dst->obsolete is zero, but
rt6_get_cookie() may also access per-cpu value when rt->sernum is
zero. In this case, rt->sernum aliases ioam6_lwt::cache::reset_ts, which
can become zero, making this a potential invalid pointer access.
Fix this by embedding a full struct rt6_info for the dummy IPv6 route and
passing its dst member to the dst APIs. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer()
Sashiko pointed out that kfree_rcu() was called before
rcu_assign_pointer() in handling the comment extension.
Fix the order so that rcu_assign_pointer() called first. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types
Sashiko pointed out that there are a few lockless RCU readers
using test_bit() which is a relaxed atomic operation and
provides no memory barrier guarantees. Use test_bit_acquire()
instead where the operation may run parallel with add/del/gc,
i.e. is not one from the next cases
- protected by region lock
- in a set destroy phase
- in a new/temporary set creation phase |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix UAF in hci_unregister_dev()
hci_unregister_dev() does not disable cmd_timer and ncmd_timer
before the hci_dev structure is freed. If a timeout fires
during device teardown, the callback dereferences freed memory
(including the hdev->reset function pointer), leading to a
use-after-free.
Add disable_delayed_work_sync() calls alongside the existing
disable_work_sync() calls to ensure both timers are fully
quiesced before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| An authentication bypass vulnerability exists in the generic opaque token validation path (validateOpaqueToken) of googleapis/mcp-toolbox.
When verifying an unparsed opaque token via an OAuth 2.0 introspection endpoint (RFC 7662), the toolbox decodes the response into an introspectResp struct where the Active field is declared as a pointer to a boolean (*bool). The code only explicitly rejects a token if the response contains a populated active field set to false (if introspectResp.Active != nil && !*introspectResp.Active). If an introspection endpoint responds with a payload that completely omits the mandatory active key, the internal variable remains nil, causing the conditional check to short-circuit. As a result, Toolbox accepts authorization tokens missing the "active" field, granting access to protected tools and underlying data sources. |
| Use after free in Windows DNS allows an unauthorized attacker to elevate privileges over a network. |
| Use after free in Windows DNS allows an authorized attacker to execute code over a network. |
| A memory-corruption vulnerability exists in a kernel-mode component of BeyondTrust Endpoint Privilege Management (Windows deployments) prior to version 26.1.2. Insufficient validation of input processed by the component may result in memory being accessed outside its intended bounds. |
| Out-of-bounds write in Windows DNS allows an unauthorized attacker to execute code over an adjacent network. |
| An authentication bypass vulnerability exists in the generic opaque token validation path (validateOpaqueToken) of googleapis/mcp-toolbox.
When the toolbox validates an opaque token via an OAuth 2.0 introspection endpoint (RFC 7662), it decodes the response into an introspectResp struct. However, the subsequent claim-checking logic (validateClaims) evaluates the issuer condition as if a.issuer != "" && iss != "". If the external OAuth provider's introspection response omits the optional iss (issuer) field completely, the variable iss defaults to an empty string. This causes the conditional block to evaluate to false and be skipped silently. Consequently, the application accepts tokens issued by unauthorized or unintended third-party identity providers. |
| A flaw was found in 389 Directory Server. The dereference control plugin does not check for allocation failure before using a BER structure, allowing an unauthenticated remote attacker to crash the LDAP server when the system is under memory pressure. |
| A flaw was found in 389 Directory Server. An unauthenticated remote attacker can inject LDAP search filters into the CleanAllRUV replication status-check extended operation. Because the handler performs the search against cn=config with elevated replication plugin privileges and returns a boolean match result, the attacker can extract sensitive server configuration metadata, including replication bind DNs and password storage scheme information. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to a heap-based buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by
bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ
handler, which cannot take bus.lock. This allows concurrent device
addition/removal in the I3C core to modify the list while it is being
traversed, potentially leading to use-after-free or crashes.
Remove the dependency on the bus device list and introduce a dedicated
lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained
under hci->lock. Update the array when IBIs are enabled or disabled,
so that it always reflects the set of devices allowed to generate IBIs.
Also update when IBIs are freed, to cover the corner case when an IBI is
freed without first being disabled (e.g. oldedev in
i3c_master_add_i3c_dev_locked()).
Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new
array, and add a lockdep assertion to enforce that hci->lock is held
by callers.
Demote a message in PIO and DMA IBI handling, from an error to a debug
message, because there is a race window when the condition can arise
normally. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix refcount leak when updating the sk_ctx
Currently update_sk_ctx() transfers the plabel reference, unfortunately
it is also unconditionally put in the caller. Ideally we would make
the caller conditionally put the reference based on whether it was
transferred but for now just fix the bug by getting a reference. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling
ams_event_to_channel() may return a pointer past the end of
dev->channels when no matching scan_index is found. This can lead
to invalid memory access in ams_handle_event().
Add a bounds check in ams_event_to_channel() and return NULL when
no channel is found. Also guard the caller to safely handle this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
The original implementation caused an out-of-bounds memory access
in the sdw_add_element_group_count for-loop when i == num.
for (i = 0; i <= num; i++) {
if (rate == group->rates[i] && lane == group->lanes[i])
...
To fix this error, the function now checks for existing rate/lane
entries in the group(a function parameter) using a for-loop before
adding them.
No functional changes apart from this fix. |
