| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix validation of VF state in get resources
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: add max boundary check for VF filters
There is no check for max filters that VF can request. Add it. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: fix integer overflow in fbcon_do_set_font
Fix integer overflow vulnerabilities in fbcon_do_set_font() where font
size calculations could overflow when handling user-controlled font
parameters.
The vulnerabilities occur when:
1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount
multiplication with user-controlled values that can overflow.
2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow
3. This results in smaller allocations than expected, leading to buffer
overflows during font data copying.
Add explicit overflow checking using check_mul_overflow() and
check_add_overflow() kernel helpers to safety validate all size
calculations before allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix race during abort for file descriptors
fput() doesn't actually call file_operations release() synchronously, it
puts the file on a work queue and it will be released eventually.
This is normally fine, except for iommufd the file and the iommufd_object
are tied to gether. The file has the object as it's private_data and holds
a users refcount, while the object is expected to remain alive as long as
the file is.
When the allocation of a new object aborts before installing the file it
will fput() the file and then go on to immediately kfree() the obj. This
causes a UAF once the workqueue completes the fput() and tries to
decrement the users refcount.
Fix this by putting the core code in charge of the file lifetime, and call
__fput_sync() during abort to ensure that release() is called before
kfree. __fput_sync() is a bit too tricky to open code in all the object
implementations. Instead the objects tell the core code where the file
pointer is and the core will take care of the life cycle.
If the object is successfully allocated then the file will hold a users
refcount and the iommufd_object cannot be destroyed.
It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an
issue because close() is already using a synchronous version of fput().
The UAF looks like this:
BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164
CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline]
__refcount_dec include/linux/refcount.h:455 [inline]
refcount_dec include/linux/refcount.h:476 [inline]
iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
__fput+0x402/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL. |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. |
| An low privileged remote attacker with an account for the Web-based management can change the system configuration to perform a command injection as root, resulting in a total loss of confidentiality, availability and integrity due to improper control of generation of code ('Code Injection'). |
| The Ova Advent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's shortcodes in all versions up to, and including, 1.1.7 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Lisfinity Core - Lisfinity Core plugin used for pebas® Lisfinity WordPress theme plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 1.4.0. This is due to the plugin assigning the editor role by default. While limitations with respect to capabilities are put in place, use of the API is not restricted. This vulnerability can be leveraged together with CVE-2025-6038 to obtain admin privileges. |
| In Eclipse ThreadX before 6.4.3, when memory protection is enabled, syscall parameters verification wasn't enough, allowing an attacker to obtain an arbitrary memory read/write. |
| RemoteCall Remote Support Program (for Operator) versions prior to 5.3.0 contain an uncontrolled search path element vulnerability. If a crafted DLL is placed in the same folder with the affected product, it may cause an arbitrary code execution. |
| The Quick Featured Images plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 13.7.2 via the qfi_set_thumbnail and qfi_delete_thumbnail AJAX actions due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Author-level access and above, to change or remove featured images of other user's posts. |
| In Eclipse ThreadX before version 6.4.3, the thread module has a setting of maximum priority. In some cases the check of that maximum priority wasn't performed, allowing, as a result, to obtain a thread with higher priority than expected and causing a possible denial of service. |
| SKYSEA Client View Ver.11.221.03 and earlier allows remote code execution via a flaw in processing authentication on the TCP connection with the management console program. |
| Microsoft is aware of vulnerabilities in the third party Agere Modem driver that ships natively with supported Windows operating systems. This is an announcement of the upcoming removal of ltmdm64.sys driver. The driver has been removed in the October cumulative update.
Fax modem hardware dependent on this specific driver will no longer work on Windows.
Microsoft recommends removing any existing dependencies on this hardware. |
| In IGEL OS before 11, Secure Boot can be bypassed because the igel-flash-driver module improperly verifies a cryptographic signature. Ultimately, a crafted root filesystem can be mounted from an unverified SquashFS image. |
| In wlan AP driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00422323; Issue ID: MSV-3810. |
| In wlan AP driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00422399; Issue ID: MSV-3748. |
| In wlan AP driver, there is a possible out of bounds write due to an integer overflow. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00418785; Issue ID: MSV-3515. |
| In wlan AP driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00415809; Issue ID: MSV-3405. |
