| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
| A vulnerability, which was classified as problematic, has been found in SeaCMS 13.2. This issue affects some unknown processing of the file /admin_pay.php. The manipulation of the argument cstatus leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| A missing exception check in Palo Alto Networks PAN-OS® software with the web proxy feature enabled allows an unauthenticated attacker to send a burst of maliciously crafted packets that causes the firewall to become unresponsive and eventually reboot. Repeated successful attempts to trigger this condition will cause the firewall to enter maintenance mode.
This issue does not affect Cloud NGFW or Prisma Access. |
| Flowise is a drag & drop user interface to build a customized large language model flow. A file upload vulnerability in version 3.0.7 of FlowiseAI allows authenticated users to upload arbitrary files without proper validation. This enables attackers to persistently store malicious Node.js web shells on the server, potentially leading to Remote Code Execution (RCE). The system fails to validate file extensions, MIME types, or file content during uploads. As a result, malicious scripts such as Node.js-based web shells can be uploaded and stored persistently on the server. These shells expose HTTP endpoints capable of executing arbitrary commands if triggered. The uploaded shell does not automatically execute, but its presence allows future exploitation via administrator error or chained vulnerabilities. This presents a high-severity threat to system integrity and confidentiality. As of time of publication, no known patched versions are available. |
| Cross Site Scripting vulnerability in DokuWiki 2025-05-14a 'Librarian'[56.1] allows a remote attacker to execute arbitrary code via the q parameter |
| SillyTavern is a locally installed user interface that allows users to interact with text generation large language models, image generation engines, and text-to-speech voice models. In versions prior to 1.13.4, the web user interface for SillyTavern is susceptible to DNS rebinding, allowing attackers to perform actions like install malicious extensions, read chats, inject arbitrary HTML for phishing attacks, etc. The vulnerability has been patched in the version 1.13.4 by introducing a server configuration setting that enables a validation of host names in inbound HTTP requests according to the provided list of allowed hosts: `hostWhitelist.enabled` in config.yaml file or `SILLYTAVERN_HOSTWHITELIST_ENABLED` environment variable. While the setting is disabled by default to honor a wide variety of existing user configurations and maintain backwards compatibility, existing and new users are encouraged to review their server configurations and apply necessary changes to their setup, especially if hosting over the local network while not using SSL. |
| Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. In version 2.17.0, rate limits can be completely bypassed by manipulating the X-Forwarded-For header. This renders IP-based rate limiting ineffective against determined attackers. Litestar's RateLimitMiddleware uses `cache_key_from_request()` to generate cache keys for rate limiting. When an X-Forwarded-For header is present, the middleware trusts it unconditionally and uses its value as part of the client identifier. Since clients can set arbitrary X-Forwarded-For values, each different spoofed IP creates a separate rate limit bucket. An attacker can rotate through different header values to avoid hitting any single bucket's limit. This affects any Litestar application using RateLimitMiddleware with default settings, which likely includes most applications that implement rate limiting. Version 2.18.0 contains a patch for the vulnerability. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| The Trinity Audio – Text to Speech AI audio player to convert content into audio plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 5.20.2. This is due to missing or incorrect nonce validation in the '/admin/inc/post-management.php' file. This makes it possible for unauthenticated attackers to activate/deactivate posts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Contest Gallery – Upload, Vote & Sell with PayPal and Stripe plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple form field parameters in all versions up to, and including, 27.0.2. This is due to insufficient input sanitization and output escaping on user-supplied attributes. This makes it possible for authenticated attackers, with author-level access or higher, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Trinity Audio – Text to Speech AI audio player to convert content into audio plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'range-date' parameter in all versions up to, and including, 5.20.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The WDesignKit – Elementor & Gutenberg Starter Templates, Patterns, Cloud Workspace & Widget Builder plugin for WordPress is vulnerable to missing authorization via the wdkit_handle_review_submission function in versions less than, or equal to, 1.2.16. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to submit feedback data to external services. |
| Mastra is a Typescript framework for building AI agents and assistants. Versions 0.13.8 through 0.13.20-alpha.0 are vulnerable to a Directory Traversal attack that results in the disclosure of directory listings. The code contains a security check to prevent path traversal for reading file contents, but this check is effectively bypassed by subsequent logic that attempts to find directory suggestions. An attacker can leverage this flaw to list the contents of arbitrary directories on the user's filesystem, including the user's home directory, exposing sensitive information about the file system's structure. This issue is fixed in version 0.13.20. |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions 7.0.10 and below and 8.0.0-beta1 through 8.0.0-rc1, mishandling of data on HTTP2 stream 0 can lead to uncontrolled memory usage, leading to loss of visibility. Workarounds include disabling the HTTP/2 parser, and using a signature like drop http2 any any -> any any (frame:http2.hdr; byte_test:1,=,0,3; byte_test:4,=,0,5; sid: 1;) where the first byte test tests the HTTP2 frame type DATA and the second tests the stream id 0. This is fixed in versions 7.0.11 and 8.0.0. |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Version 8.0.0's usage of the tls.subjectaltname keyword can lead to a segmentation fault when the decoded subjectaltname contains a NULL byte. This issue is fixed in version 8.0.1. To workaround this issue, disable rules using the tls.subjectaltname keyword. |
| KUNO CMS is a fully deployable full-stack blog application. Versions 1.3.13 and below contain validation flaws in its file upload functionality that can be exploited for stored XSS. The upload endpoint only validates file types based on Content-Type headers, lacks file content analysis and extension whitelist restrictions, allowing attackers to upload SVG files containing malicious scripts (disguised as images). When users access the uploaded resource pages, arbitrary JavaScript executes in their browsers. This issue is fixed in version 1.3.14. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
