| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix moving cancelled entry to ent_in_userspace list
fuse_uring_cancel() moves entries that are available (these have no reqs
attached) to the ent_in_userspace list. ent_list_request_expired()
checks the first entry on ent_in_userspace and dereferences
ent->fuse_req unconditionally, which will crash on a cancelled entry
that was moved to this list.
Fix this by freeing the entry and dropping queue_refs directly in
fuse_uring_cancel(). This is safe because cancel is the cancel handler
itself - after io_uring_cmd_done(), no more cancels will be dispatched
for this command, and teardown serializes with cancel via queue->lock.
Since cancel now decrements queue_refs, fuse_uring_abort() must no
longer gate fuse_uring_abort_end_requests() on queue_refs > 0, as
cancelled entries may have already dropped queue_refs while requests are
still queued. Remove the gate so abort always flushes requests and stops
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req
When fuse_resend() moves a request from fpq->processing back to
fiq->pending, it sets FR_PENDING and clears FR_SENT but does not
remove the requests intr_entry from fiq->interrupts. If the
request had FR_INTERRUPTED set from a prior signal, intr_entry
remains dangling on fiq->interrupts. When the requesting task
then receives a fatal signal, fuse_remove_pending_req() sees
FR_PENDING=1, removes the request from fiq->pending and frees it
via the refcount path, also without cleaning intr_entry. The
stale intr_entry causes use-after-free when fuse_read_interrupt()
iterates fiq->interrupts:
- list_del_init(&req->intr_entry) -> UAF write on freed slab
- req->in.h.unique -> UAF read, data leaked to userspace
Remove intr_entry from fiq->interrupts in fuse_resend() for
interrupted requests before they are placed back on fiq->pending.
Add a WARN_ON if the intr_entry is not empty on request destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter deregistration race
Adapters can be looked up by their id using i2c_get_adapter() which
takes a reference to the embedded struct device.
Remove the adapter from the IDR before tearing it down during
deregistration (and on registration failure) to make sure its resources
are not accessed after having been freed (e.g. the device name). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ensure vendor's exit handler runs before fastpath userspace exits
Move the handling of fastpath userspace exits into vendor code to ensure
KVM runs vendor specific operations that need to run before userspace gains
control of the vCPU. E.g. for VMX (and soon to be for SVM as well), KVM
needs to flush the PML buffer prior to exiting to userspace, otherwise any
memory written by the final KVM_RUN might never be flagged as dirty.
Note, waiting to snapshot CR0 and CR3 until svm_handle_exit() is flawed in
general, as that risks consuming stale state in a fastpath handler. That
will be addressed in a future change. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Avoid dereferencing NULL VNCR pseudo-TLB
VNCR TLB invalidation occurs from MMU notifiers or TLBI instructions,
and either can race against a vcpu not being onlined yet (no pseudo-TLB
allocated). Similarly, the TLB might be invalid, and the invalidation
should be skipped in this case.
Both kvm_invalidate_vncr_ipa() and kvm_invalidate_vncr_va() are
expected to perform the same checks, except that the latter doesn't
check for the allocation and blindly dereferences the pointer.
Solve this by introducing a new iterator built on top of the usual
kvm_for_each_vcpu() that checks for both of the above conditions,
and convert the two users to it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: page_ext: add count limit to page_ext_iter_next to prevent invalid PFN access
The page_ext iteration API does not validate if the PFN still belongs to a
valid section while advancing the iterator. When dynamically adding
memory in the hotplug path, it can lead to a NULL pointer dereference
during page_ext_lookup at the boundary of the last valid section when
iterator count equals __pgcount.
The for_each_page_ext() macro calls page_ext_iter_next() as its loop
increment. for_each_page_ext() does a "__page_ext =
page_ext_iter_next(&__iter)" at the end. This causes page_ext_iter_next()
to increment iter->index past __pgcount and call page_ext_lookup(start_pfn
+ __pgcount). During memory hotplug (online), the PFN at start_pfn +
__pgcount may belong to a section that has not yet been initialized,
causing page_ext_lookup() to trigger a NULL pointer dereference.
[ 14.555124][ T846] Call trace:
[ 14.555125][ T846] lookup_page_ext+0x6c/0x108 (P)
[ 14.555127][ T846] page_ext_lookup+0x30/0x3c
[ 14.555129][ T846] __reset_page_owner+0x11c/0x260
[ 14.571201][ T846] __free_pages_ok+0x5e8/0x8e0
[ 14.571204][ T846] __free_pages_core+0x78/0xf0
[ 14.571206][ T846] generic_online_page+0x14/0x24
[ 14.597782][ T846] online_pages+0x178/0x30c
[ 14.597784][ T846] memory_block_change_state+0x284/0x32c
[ 14.597787][ T846] memory_subsys_online+0x4c/0x64
[ 14.597789][ T846] device_online+0x88/0xb0
[ 14.597791][ T846] online_memory_block+0x30/0x40
[ 14.597793][ T846] walk_memory_blocks+0xac/0xe8
[ 14.597794][ T846] add_memory_resource+0x280/0x298
[ 14.656161][ T846] add_memory+0x60/0x98
Move the iteration boundary enforcement inside the iterator functions, so
callers cannot inadvertently access beyond the requested range. |
| In the Linux kernel, the following vulnerability has been resolved:
module: decompress: check return value of module_extend_max_pages()
module_extend_max_pages() calls kvrealloc() internally and returns
-ENOMEM on allocation failure. The return value is never checked.
If the initial allocation fails, info->pages remains NULL and
info->max_pages remains 0. Subsequent calls to module_get_next_page()
will attempt to dynamically grow the array by calling
module_extend_max_pages(info, 0) since info->used_pages is 0. This
results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated
as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel
oops.
Fix: add the missing error check after module_extend_max_pages() and
return immediately on failure. This matches the pattern used by every
other kvrealloc() caller in the module loading path.
[Sami: Corrected the analysis in the commit message.] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for SEV ioctls
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: chacha20poly1305 - validate poly1305 template argument
chachapoly_create() still accepts the compatibility poly1305 parameter
in the template name, but it assumes the second template argument is
always present and immediately passes it to strcmp().
When the argument is missing, crypto_attr_alg_name() returns an error
pointer. Check for that before comparing the name so malformed template
instantiations fail with an error instead of dereferencing the error
pointer in strcmp().
This matches the surrounding Crypto API template pattern where
crypto_attr_alg_name() results are validated before string-specific use. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: Validate SVID index in svdm_consume_modes()
In svdm_consume_modes(), the SVID value is read from pmdata->svids using
pmdata->svid_index as an array index without bounds validation:
paltmode->svid = pmdata->svids[pmdata->svid_index];
If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results
in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data
is embedded inside struct tcpm_port, indexing past svids reads into
adjacent fields. In particular:
- At index 16, it reads the altmodes count.
- At index 18 and beyond, it reads into altmode_desc[], which contains
partner-supplied SVDM Discovery Modes VDOs.
By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index
to 20, the partner can force paltmode->svid to be loaded with an arbitrary,
partner- chosen SVID, which is then registered via
typec_partner_register_altmode().
Fix this by validating that pmdata->svid_index is non-negative and strictly
less than pmdata->nsvids before accessing the pmdata->svids array inside
svdm_consume_modes(). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ldusb: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_printer: take kref only for successful open
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
The OTG branch of composite_setup() falls back to the first
configuration when none is selected:
if (cdev->config)
config = cdev->config;
else
config = list_first_entry(&cdev->configs,
struct usb_configuration, list);
if (!config)
goto done;
...
memcpy(req->buf, config->descriptors[0], value);
list_first_entry() never returns NULL. On an empty list it returns
container_of() of the list head. So the "if (!config)" check is dead.
When cdev->configs is empty, config points at the head inside struct
usb_composite_dev. config->descriptors[0] reads whatever sits at that
offset. The memcpy copies up to w_length bytes of it into the response
buffer.
cdev->configs can be empty in two cases. One is a teardown race on
gadget unbind with a control transfer in flight. The other is a driver
that sets is_otg before it adds a config. A reproducer that holds
cdev->configs empty triggers a KASAN fault in this branch.
Use list_first_entry_or_null() so the existing check does its job. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup()
The dwc3_ulpi_setup() calls the register read and write calls with
dwc3->regs when both these calls take the dwc3 structure directly.
Chnage these two calls to fix the following sparse warning, and
possibly a nasty bug in the dwc3_ulpi_setup() code:
drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs
drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep dynamic inner array lookups nullable
An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its
inner map template. A concrete inner array with a different max_entries
value can then replace the template.
After a successful outer map lookup, the verifier represents the
resulting map pointer using the inner map template. Const-key lookup
nullness elision consequently uses the template max_entries even though
the runtime helper uses the concrete inner map max_entries.
Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP,
because the template max_entries does not prove that the key is in bounds
for the concrete runtime map. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix memory leak in xfs_dqinode_metadir_create()
If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current
code returns directly, leaking the allocated update and transaction state.
If the subsequent commit fails, the caller-owned inode reference is left
behind.
Fix this memory leak by routing the create failure path through
xfs_metadir_cancel(). For both create and commit failures, finish and
release any inode returned to the caller, mirroring the unwind pattern in
xfs_metadir_mkdir().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. Runtime validation
used kprobe fault injection during `mount -o uquota` on a metadir XFS
image. Injecting xfs_metadir_create() reproduced the old active-update path
that left mount stuck later in mount setup; after this change, the same
injection reported cancel_hits=1 and irele_hits=1. Injecting
xfs_metadir_commit() exercised the old inode-reference leak path; after
this change, it reported irele_hits=1. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-jpeg: cancel workqueue on release for supported platforms only
Since a recent fix the mtk_jpeg_release function cancels any pending
or running work present in the driver workqueue using
cancel_work_sync function.
Currently, only the multicore based variants use this workqueue and they
have the jpeg_worker platform data field initialized with a workqueue
callback function. For the others, this field value remain NULL by
default.
The cancel_work_sync function is unconditionally called in
mtk_jpeg_release function, even for the variants that do not use the
workqueue. This call generates a WARN_ON print in __flush_work because
the workqueue callback function presence check fails in __flush_work
function (used by cancel_work_sync).
So, to avoid these warnings, call cancel_work_sync only if a workqueue
callback is defined in platform data. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
When init (zeroing) on allocation is requested, for kmalloc() we
generally have to zero the full object size even if a smaller size is
requested, in order to provide krealloc()'s __GFP_ZERO guarantees.
But if we track the requested size, krealloc() uses that information to
do the right thing, so we can zero only the requested size. With red
zoning also enabled, any extra size became part of the red zone, so it
must not be zeroed and thus we must zero only the requested size.
However the current check is imprecise, and will trigger also when only
SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking
the requested size). This means enabling red zoning alone can compromise
krealloc()'s __GFP_ZERO contract.
Fix this by using slub_debug_orig_size() instead, which is the exact
check for whether the requested size is tracked. We don't need to care
if red zoning is also enabled or not. Also update and expand the
comment accordingly. |
