| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
veth: Ensure eth header is in skb's linear part
After feeding a decapsulated packet to a veth device with act_mirred,
skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(),
which expects at least ETH_HLEN byte of linear data (as
__dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes
unconditionally).
Use pskb_may_pull() to ensure veth_xmit() respects this constraint.
kernel BUG at include/linux/skbuff.h:2328!
RIP: 0010:eth_type_trans+0xcf/0x140
Call Trace:
<IRQ>
__dev_forward_skb2+0xe3/0x160
veth_xmit+0x6e/0x250 [veth]
dev_hard_start_xmit+0xc7/0x200
__dev_queue_xmit+0x47f/0x520
? skb_ensure_writable+0x85/0xa0
? skb_mpls_pop+0x98/0x1c0
tcf_mirred_act+0x442/0x47e [act_mirred]
tcf_action_exec+0x86/0x140
fl_classify+0x1d8/0x1e0 [cls_flower]
? dma_pte_clear_level+0x129/0x1a0
? dma_pte_clear_level+0x129/0x1a0
? prb_fill_curr_block+0x2f/0xc0
? skb_copy_bits+0x11a/0x220
__tcf_classify+0x58/0x110
tcf_classify_ingress+0x6b/0x140
__netif_receive_skb_core.constprop.0+0x47d/0xfd0
? __iommu_dma_unmap_swiotlb+0x44/0x90
__netif_receive_skb_one_core+0x3d/0xa0
netif_receive_skb+0x116/0x170
be_process_rx+0x22f/0x330 [be2net]
be_poll+0x13c/0x370 [be2net]
__napi_poll+0x2a/0x170
net_rx_action+0x22f/0x2f0
__do_softirq+0xca/0x2a8
__irq_exit_rcu+0xc1/0xe0
common_interrupt+0x83/0xa0 |
| iptraf-ng 1.2.1 has a stack-based buffer overflow. In src/ifaces.c, the strcpy function consistently fails to control the size, and it is consequently possible to overflow memory on the stack. |
| There is a denial of service vulnerability in the header parsing component of Rack. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/fpu: Re-add exception handling in load_fpu_state()
With the recent rewrite of the fpu code exception handling for the
lfpc instruction within load_fpu_state() was erroneously removed.
Add it again to prevent that loading invalid floating point register
values cause an unhandled specification exception. |
| .NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability |
| ASP.NET Core Security Feature Bypass Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix finding a last resort AG in xfs_filestream_pick_ag
When the main loop in xfs_filestream_pick_ag fails to find a suitable
AG it tries to just pick the online AG. But the loop for that uses
args->pag as loop iterator while the later code expects pag to be
set. Fix this by reusing the max_pag case for this last resort, and
also add a check for impossible case of no AG just to make sure that
the uninitialized pag doesn't even escape in theory. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()
Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.
All of the tegra194 endpoint SoCs supported as of now depend on the refclk
from the host for keeping the controller operational. Due to this
limitation, any access to the hardware registers in the absence of refclk
will result in a whole endpoint crash. Unfortunately, most of the
controller cleanups require accessing the hardware registers (like eDMA
cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup
functions can cause the crash in the endpoint SoC once host asserts PERST#.
One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host.
Thus, fix this crash by moving the controller cleanups to the start of
the pex_ep_event_pex_rst_deassert() function. This function is called
whenever the host has deasserted PERST# and it is guaranteed that the
refclk would be active at this point. So at the start of this function
(after enabling resources) the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fw: scan offload prohibit all 6 GHz channel if no 6 GHz sband
We have some policy via BIOS to block uses of 6 GHz. In this case, 6 GHz
sband will be NULL even if it is WiFi 7 chip. So, add NULL handling here
to avoid crash. |
| In the Linux kernel, the following vulnerability has been resolved:
block: refine the EOF check in blkdev_iomap_begin
blkdev_iomap_begin rounds down the offset to the logical block size
before stashing it in iomap->offset and checking that it still is
inside the inode size.
Check the i_size check to the raw pos value so that we don't try a
zero size write if iter->pos is unaligned. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Avoid unnecessary destruction of file_ida
file_ida is allocated during cdev open and is freed accordingly
during cdev release. This sequence is guaranteed by driver file
operations. Therefore, there is no need to destroy an already empty
file_ida when the WQ cdev is removed.
Worse, ida_free() in cdev release may happen after destruction of
file_ida per WQ cdev. This can lead to accessing an id in file_ida
after it has been destroyed, resulting in a kernel panic.
Remove ida_destroy(&file_ida) to address these issues. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: don't lock while !TASK_RUNNING
There is a report of io_rsrc_ref_quiesce() locking a mutex while not
TASK_RUNNING, which is due to forgetting restoring the state back after
io_run_task_work_sig() and attempts to break out of the waiting loop.
do not call blocking ops when !TASK_RUNNING; state=1 set at
[<ffffffff815d2494>] prepare_to_wait+0xa4/0x380
kernel/sched/wait.c:237
WARNING: CPU: 2 PID: 397056 at kernel/sched/core.c:10099
__might_sleep+0x114/0x160 kernel/sched/core.c:10099
RIP: 0010:__might_sleep+0x114/0x160 kernel/sched/core.c:10099
Call Trace:
<TASK>
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0xb4/0x940 kernel/locking/mutex.c:752
io_rsrc_ref_quiesce+0x590/0x940 io_uring/rsrc.c:253
io_sqe_buffers_unregister+0xa2/0x340 io_uring/rsrc.c:799
__io_uring_register io_uring/register.c:424 [inline]
__do_sys_io_uring_register+0x5b9/0x2400 io_uring/register.c:613
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd8/0x270 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6f/0x77 |
| In the Linux kernel, the following vulnerability has been resolved:
rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu
KCSAN reports a data race when access the krcp->monitor_work.timer.expires
variable in the schedule_delayed_monitor_work() function:
<snip>
BUG: KCSAN: data-race in __mod_timer / kvfree_call_rcu
read to 0xffff888237d1cce8 of 8 bytes by task 10149 on cpu 1:
schedule_delayed_monitor_work kernel/rcu/tree.c:3520 [inline]
kvfree_call_rcu+0x3b8/0x510 kernel/rcu/tree.c:3839
trie_update_elem+0x47c/0x620 kernel/bpf/lpm_trie.c:441
bpf_map_update_value+0x324/0x350 kernel/bpf/syscall.c:203
generic_map_update_batch+0x401/0x520 kernel/bpf/syscall.c:1849
bpf_map_do_batch+0x28c/0x3f0 kernel/bpf/syscall.c:5143
__sys_bpf+0x2e5/0x7a0
__do_sys_bpf kernel/bpf/syscall.c:5741 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5739 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5739
x64_sys_call+0x2625/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffff888237d1cce8 of 8 bytes by task 56 on cpu 0:
__mod_timer+0x578/0x7f0 kernel/time/timer.c:1173
add_timer_global+0x51/0x70 kernel/time/timer.c:1330
__queue_delayed_work+0x127/0x1a0 kernel/workqueue.c:2523
queue_delayed_work_on+0xdf/0x190 kernel/workqueue.c:2552
queue_delayed_work include/linux/workqueue.h:677 [inline]
schedule_delayed_monitor_work kernel/rcu/tree.c:3525 [inline]
kfree_rcu_monitor+0x5e8/0x660 kernel/rcu/tree.c:3643
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3310
worker_thread+0x51d/0x6f0 kernel/workqueue.c:3391
kthread+0x1d1/0x210 kernel/kthread.c:389
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 UID: 0 PID: 56 Comm: kworker/u8:4 Not tainted 6.12.0-rc2-syzkaller-00050-g5b7c893ed5ed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_unbound kfree_rcu_monitor
<snip>
kfree_rcu_monitor() rearms the work if a "krcp" has to be still
offloaded and this is done without holding krcp->lock, whereas
the kvfree_call_rcu() holds it.
Fix it by acquiring the "krcp->lock" for kfree_rcu_monitor() so
both functions do not race anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix sk_error_queue memory leak
Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.
unreferenced object 0xffff8881028beb00 (size 224):
comm "vsock_test", pid 1218, jiffies 4294694897
hex dump (first 32 bytes):
90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!.....
00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!.....
backtrace (crc 6c7031ca):
[<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370
[<ffffffff81d35882>] __alloc_skb+0x132/0x180
[<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80
[<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240
[<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0
[<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50
[<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450
[<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0
[<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0
[<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80
[<ffffffff820d3df3>] do_syscall_64+0x93/0x180
[<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
virtio/vsock: Improve MSG_ZEROCOPY error handling
Add a missing kfree_skb() to prevent memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't leak a link on AP removal
Release the link mapping resource in AP removal. This impacted devices
that do not support the MLD API (9260 and down).
On those devices, we couldn't start the AP again after the AP has been
already started and stopped. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix idpf_vc_core_init error path
In an event where the platform running the device control plane
is rebooted, reset is detected on the driver. It releases
all the resources and waits for the reset to complete. Once the
reset is done, it tries to build the resources back. At this
time if the device control plane is not yet started, then
the driver timeouts on the virtchnl message and retries to
establish the mailbox again.
In the retry flow, mailbox is deinitialized but the mailbox
workqueue is still alive and polling for the mailbox message.
This results in accessing the released control queue leading to
null-ptr-deref. Fix it by unrolling the work queue cancellation
and mailbox deinitialization in the reverse order which they got
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: init: protect sched with rcu_read_lock
Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT
creates this splat when an MPTCP socket is created:
=============================
WARNING: suspicious RCU usage
6.12.0-rc2+ #11 Not tainted
-----------------------------
net/mptcp/sched.c:44 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by mptcp_connect/176.
stack backtrace:
CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
mptcp_sched_find (net/mptcp/sched.c:44 (discriminator 7))
mptcp_init_sock (net/mptcp/protocol.c:2867 (discriminator 1))
? sock_init_data_uid (arch/x86/include/asm/atomic.h:28)
inet_create.part.0.constprop.0 (net/ipv4/af_inet.c:386)
? __sock_create (include/linux/rcupdate.h:347 (discriminator 1))
__sock_create (net/socket.c:1576)
__sys_socket (net/socket.c:1671)
? __pfx___sys_socket (net/socket.c:1712)
? do_user_addr_fault (arch/x86/mm/fault.c:1419 (discriminator 1))
__x64_sys_socket (net/socket.c:1728)
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
That's because when the socket is initialised, rcu_read_lock() is not
used despite the explicit comment written above the declaration of
mptcp_sched_find() in sched.c. Adding the missing lock/unlock avoids the
warning. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: intel: platform: fix error path in device_for_each_child_node()
The device_for_each_child_node() loop requires calls to
fwnode_handle_put() upon early returns to decrement the refcount of
the child node and avoid leaking memory if that error path is triggered.
There is one early returns within that loop in
intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is
missing.
Instead of adding the missing call, the scoped version of the loop can
be used to simplify the code and avoid mistakes in the future if new
early returns are added, as the child node is only used for parsing, and
it is never assigned. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Update rx_bytes on read_skb()
Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt()
calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after
vsock_transport::read_skb().
While here, also inform the peer that we've freed up space and it has more
credit.
Failing to update rx_bytes after packet is dequeued leads to a warning on
SOCK_STREAM recv():
[ 233.396654] rx_queue is empty, but rx_bytes is non-zero
[ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589 |
