| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval
Getting / Setting the frame interval using the V4L2 subdev pad ops
get_frame_interval/set_frame_interval causes a deadlock, as the
subdev state is locked in the [1] but also in the driver itself.
In [2] it's described that the caller is responsible to acquire and
release the lock in this case. Therefore, acquiring the lock in the
driver is wrong.
Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval()
and mt9m114_ifp_set_frame_interval().
[1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129
[2] Documentation/driver-api/media/v4l2-subdev.rst |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Optimize module load time by optimizing PLT/GOT counting
When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and
CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock,
the relevant logs are as follows:
rcu: INFO: rcu_sched self-detected stall on CPU
...
Call Trace:
[<900000000024f9e4>] show_stack+0x5c/0x180
[<90000000002482f4>] dump_stack_lvl+0x94/0xbc
[<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280
[<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88
[<9000000000396c34>] update_process_times+0xb4/0x150
[<90000000003b2474>] tick_nohz_handler+0xf4/0x250
[<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428
[<9000000000399b2c>] hrtimer_interrupt+0x214/0x538
[<9000000000253634>] constant_timer_interrupt+0x64/0x80
[<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0
[<9000000000349a78>] handle_irq_event_percpu+0x18/0x88
[<9000000000354c00>] handle_percpu_irq+0x90/0xf0
[<9000000000348c74>] handle_irq_desc+0x94/0xb8
[<9000000001012b28>] handle_cpu_irq+0x68/0xa0
[<9000000001def8c0>] handle_loongarch_irq+0x30/0x48
[<9000000001def958>] do_vint+0x80/0xd0
[<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0
[<90000000006344f4>] __asan_load8+0x4c/0x120
[<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8
[<90000000003895f0>] load_module+0x9e0/0x2958
[<900000000038b770>] __do_sys_init_module+0x208/0x2d0
[<9000000001df0c34>] do_syscall+0x94/0x190
[<900000000024d6fc>] handle_syscall+0xbc/0x158
After analysis, this is because the slow speed of loading the amdgpu
module leads to the long time occupation of the cpu and then the soft
deadlock.
When loading a module, module_frob_arch_sections() tries to figure out
the number of PLTs/GOTs that will be needed to handle all the RELAs. It
will call the count_max_entries() to find in an out-of-order date which
counting algorithm has O(n^2) complexity.
To make it faster, we sort the relocation list by info and addend. That
way, to check for a duplicate relocation, it just needs to compare with
the previous entry. This reduces the complexity of the algorithm to O(n
log n), as done in commit d4e0340919fb ("arm64/module: Optimize module
load time by optimizing PLT counting"). This gives sinificant reduction
in module load time for modules with large number of relocations.
After applying this patch, the soft deadlock problem has been solved,
and the kernel starts normally without "Call Trace".
Using the default configuration to test some modules, the results are as
follows:
Module Size
ip_tables 36K
fat 143K
radeon 2.5MB
amdgpu 16MB
Without this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 54 1221/84
amdgpu 1411 4525/1098
With this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 22 1221/84
amdgpu 45 4525/1098 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, fix complex rules rehash error flow
Moving rules from matcher to matcher should not fail.
However, if it does fail due to various reasons, the error flow
should allow the kernel to continue functioning (albeit with broken
steering rules) instead of going into series of soft lock-ups or
some other problematic behaviour.
Similar to the simple rules, complex rules rehash logic suffers
from the same problems. This patch fixes the error flow for moving
complex rules:
- If new rule creation fails before it was even enqeued, do not
poll for completion
- If TIMEOUT happened while moving the rule, no point trying
to poll for completions for other rules. Something is broken,
completion won't come, just abort the rehash sequence.
- If some other completion with error received, don't give up.
Continue handling rest of the rules to minimize the damage.
- Make sure that the first error code that was received will
be actually returned to the caller instead of replacing it
with the generic error code.
All the aforementioned issues stem from the same bad error flow,
so no point fixing them one by one and leaving partially broken
code - fixing them in one patch. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix lockdep warning during rmmod
The commit under the Fixes tag added a netdev_assert_locked() in
bnxt_free_ntp_fltrs(). The lock should be held during normal run-time
but the assert will be triggered (see below) during bnxt_remove_one()
which should not need the lock. The netdev is already unregistered by
then. Fix it by calling netdev_assert_locked_or_invisible() which will
not assert if the netdev is unregistered.
WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re]
CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa92082387da0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf
RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3
R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001
R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100
FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0
Call Trace:
<TASK>
bnxt_remove_one+0x57/0x180 [bnxt_en]
pci_device_remove+0x39/0xc0
device_release_driver_internal+0xa5/0x130
driver_detach+0x42/0x90
bus_remove_driver+0x61/0xc0
pci_unregister_driver+0x38/0x90
bnxt_exit+0xc/0x7d0 [bnxt_en] |
| ClipBucket v5 is an open source video sharing platform. In ClipBucket version 5.5.2, a change to network.class.php causes the application to dynamically build the server URL from the incoming HTTP Host header when the configuration base_url is not set. Because Host is a client-controlled header, an attacker can supply an arbitrary Host value. This allows an attacker to cause password-reset links (sent by forget.php) to be generated with the attacker’s domain. If a victim follows that link and enters their activation code on the attacker-controlled domain, the attacker can capture the code and use it to reset the victim’s password and take over the account. This issue has been patched in version 5.5.2#162. |
| Piwigo is a full featured open source photo gallery application for the web. In Piwigo 15.6.0, using the password reset function allows sending a password-reset URL by entering an existing username or email address. However, the hostname used to construct this URL is taken from the HTTP request's Host header and is not validated at all. Therefore, an attacker can send a password-reset URL with a modified hostname to an existing user whose username or email the attacker knows or guesses. This issue has been patched in version 15.7.0. |
| Improper authorization in the temporary access workflow of Devolutions Server 2025.2.12.0 and earlier allows an authenticated basic user to self-approve or approve the temporary access requests of other users and gain unauthorized access to vaults and entries via crafted API requests. |
| A flaw in DRBG number generation within the Network Security Services (NSS) library where the internal state V does not correctly carry bits over. The NSS library has been updated to fix this issue to address this issue and Firefox ESR 52.1 has been updated with NSS version 3.28.4. This vulnerability affects Thunderbird < 52.1, Firefox ESR < 45.9, Firefox ESR < 52.1, and Firefox < 53. |
| Manually dragging and dropping an Outlook email message into the browser will trigger a page navigation when the message's mail columns are incorrectly interpreted as a URL. *Note: this issue only affects Windows operating systems with Outlook installed. Other operating systems are not affected.*. This vulnerability affects Firefox ESR < 60.2 and Firefox < 62. |
| The ConvolveHorizontally function in Skia, as used in Mozilla Firefox before 31.0, Firefox ESR 24.x before 24.7, and Thunderbird before 24.7, does not properly handle the discarding of image data during function execution, which allows remote attackers to execute arbitrary code by triggering prolonged image scaling, as demonstrated by scaling of a high-quality image. |
| expat before version 2.4.0 does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue. NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid deadlock in fs reclaim with page writeback
Ext4 has a filesystem wide lock protecting ext4_writepages() calls to
avoid races with switching of journalled data flag or inode format. This
lock can however cause a deadlock like:
CPU0 CPU1
ext4_writepages()
percpu_down_read(sbi->s_writepages_rwsem);
ext4_change_inode_journal_flag()
percpu_down_write(sbi->s_writepages_rwsem);
- blocks, all readers block from now on
ext4_do_writepages()
ext4_init_io_end()
kmem_cache_zalloc(io_end_cachep, GFP_KERNEL)
fs_reclaim frees dentry...
dentry_unlink_inode()
iput() - last ref =>
iput_final() - inode dirty =>
write_inode_now()...
ext4_writepages() tries to acquire sbi->s_writepages_rwsem
and blocks forever
Make sure we cannot recurse into filesystem reclaim from writeback code
to avoid the deadlock. |
| Rallly is an open-source scheduling and collaboration tool. Prior to version 4.5.4, an improper authorization flaw in the comment creation endpoint allows authenticated users to impersonate any other user by altering the authorName field in the API request. This enables attackers to post comments under arbitrary usernames, including privileged ones such as administrators, potentially misleading other users and enabling phishing or social engineering attacks. This issue has been patched in version 4.5.4. |
| Rallly is an open-source scheduling and collaboration tool. Prior to version 4.5.4, an authorization flaw in the comment deletion API allows any authenticated user to delete comments belonging to other users, including poll owners and administrators. The endpoint relies solely on the comment ID for deletion and does not validate whether the requesting user owns the comment or has permission to remove it. This issue has been patched in version 4.5.4. |
| Rallly is an open-source scheduling and collaboration tool. Prior to version 4.5.4, an insecure direct object reference (IDOR) vulnerability allows any authenticated user to delete arbitrary participants from polls without ownership verification. The endpoint relies solely on a participant ID to authorize deletions, enabling attackers to remove other users (including poll owners) from polls. This impacts the integrity and availability of poll participation data. This issue has been patched in version 4.5.4. |
| Rallly is an open-source scheduling and collaboration tool. Prior to version 4.5.4, an Insecure Direct Object Reference (IDOR) vulnerability in the poll duplication endpoint (/api/trpc/polls.duplicate) allows any authenticated user to duplicate polls they do not own by modifying the pollId parameter. This effectively bypasses access control and lets unauthorized users clone private or administrative polls. This issue has been patched in version 4.5.4. |
| Rallly is an open-source scheduling and collaboration tool. Prior to version 4.5.4, an Insecure Direct Object Reference (IDOR) vulnerability exists in the poll finalization feature of the application. Any authenticated user can finalize a poll they do not own by manipulating the pollId parameter in the request. This allows unauthorized users to finalize other users’ polls and convert them into events without proper authorization checks, potentially disrupting user workflows and causing data integrity and availability issues. This issue has been patched in version 4.5.4. |
| Rallly is an open-source scheduling and collaboration tool. Prior to version 4.5.4, an insecure direct object reference (IDOR) vulnerability allows any authenticated user to modify other participants’ votes in polls without authorization. The backend relies solely on the participantId parameter to identify which votes to update, without verifying ownership or poll permissions. This allows an attacker to alter poll results in their favor, directly compromising data integrity. This issue has been patched in version 4.5.4. |
| Astro is a web framework for content-driven websites. In versions 5.2.0 through 5.12.7, there is an Open Redirect vulnerability in the trailing slash redirection logic when handling paths with double slashes. This allows an attacker to redirect users to arbitrary external domains by crafting URLs such as https://mydomain.com//malicious-site.com/. This increases the risk of phishing and other social engineering attacks. This affects sites that use on-demand rendering (SSR) with the Node or Cloudflare adapters. It does not affect static sites, or sites deployed to Netlify or Vercel. This issue is fixed in version 5.12.8. To work around this issue at the network level, block outgoing redirect responses with a Location header value that starts with `//`. |
| Traefik is an HTTP reverse proxy and load balancer. Versions prior to 2.11.6, 3.0.4, and 3.1.0-rc3 have a vulnerability that allows bypassing IP allow-lists via HTTP/3 early data requests in QUIC 0-RTT handshakes sent with spoofed IP addresses. Versions 2.11.6, 3.0.4, and 3.1.0-rc3 contain a patch for this issue. No known workarounds are available. |
