| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| LiteSpeed User-End cPanel Plugin before 2.4.5 allows privilege escalation (possibly to root), as exploited in the wild in May 2026. Detection is best done via a command line of grep -rE "cpanel_jsonapi_func=redisAble" /var/cpanel/logs /usr/local/cpanel/logs/ 2>/dev/null in Bash. If you get no output, you have not been hit with exploitation of the vulnerability. If there is output, we recommend you examine the IP addresses in the list, determine if they are valid IP addresses, and if not, block them. To determine damage done, examine the system logs for use by the detected IP addresses. The issue is related to mishandling of Redis enable/disable features. The recommended minimum version is 2.4.7. |
| A directory traversal vulnerability in the Apex One (on-premise) server could allow a pre-authenticated local attacker to modify a key table on the server to inject malicious code to deploy to agents on affected installations.
This vulnerability is only exploitable on the on-premise version of Apex One and a potential attacker must have access to the Apex One Server and already obtained administrative credentials to the server via some other method to exploit this vulnerability. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.8.11, the ydoc:document:join Socket.IO handler checks note ownership only when the document_id starts with note: (colon). However, the YdocManager storage layer normalizes all document IDs by replacing colons with underscores (document_id.replace(":", "_")). An attacker can join a document room using note_<id> (underscore) instead of note:<id> (colon), bypassing the authorization check entirely while accessing the same underlying Yjs document. The server then returns the full document state, leaking the victim's private note contents. This vulnerability is fixed in 0.8.11. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.04.1, the OAuth token strategy attached oauth_scope and oauth_granted_resources to the request user, but the ACL middleware never consulted either. An OAuth token issued with a restricted scope (e.g. MCP-only) therefore inherited the full permissions of the underlying user across all routes; the granted_resources.base_id restriction was bypassed on org-level endpoints that don't populate req.context.base_id. This vulnerability is fixed in 2026.04.1. |
| GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485.
DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it.
Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable:
#### Gateway field stack overflow
The following code is vulnerable to a stack overflow that is attacker-controlled:
v7 = strlen(g_network_config->gateway);
memcpy(&reply_buf[216], g_network_config->gateway, v7); |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, the connection-test endpoint opened a raw TCP socket to the user-supplied database host without resolving and range-checking the destination, so private and link-local addresses (including IPv4-mapped IPv6 forms and localhost) reached the driver. This vulnerability is fixed in 2026.05.1. |
| In multiple locations, there is a possible way to achieve code execution due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.5, FortiSandbox 4.4.0 through 4.4.8, FortiSandbox 4.2 all versions, FortiSandbox Cloud 5.0.4 through 5.0.5, FortiSandbox PaaS 5.0.4 through 5.0.5 may allow an unauthenticated attacker to execute unauthorized commands via specifically crafted HTTP requests |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Updates Environment Management). Supported versions that are affected are 8.61 and 8.62. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| InHand Networks IR912 V1.0.0.r20042 and IR915 V1.0.0.r20042 (including earlier versions) were discovered to contain a command injection vulnerability in the Python configuration function. This vulnerability allows remote attackers to execute arbitrary commands as root via a crafted input. |
| InHand Networks IR912 V1.0.0.r20042 and IR915 V1.0.0.r20042 (including earlier versions) were discovered to contain a command injection vulnerability in the file upload function. The vulnerability allows remote attackers to execute arbitrary commands as root via a crafted input. |
| CMS (Cryptographic Message Syntax) parsing in gpgsm in GnuPG through 2.5.20 mishandles the CMS format for AES-GCM because aes-ICVlen is supposed to be 12 bytes but 4 bytes is accepted. NOTE: this is related to CVE-2026-34182. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: hold bridge skb->dev while queued
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: disallow unicast fragment in fragment
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: handle forward allocation error
batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb
for each DHT candidate, but does not check the return value before passing
it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences
the skb unconditionally, so a failed allocation triggers a NULL pointer
dereference.
Skip forwarding to the current DHT candidate on allocation failure. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, the public shared-view relation endpoints accepted a caller-supplied column ID without verifying that the column was visible in the shared view, so anyone holding a share UUID could read links from any LTAR column on the view's table — including columns the view owner had hidden. publicMmList, publicHmList, and relDataList already ensured that the requested column belonged to the view's model, but did not check the view-column entry's show flag. This vulnerability is fixed in 2026.05.1. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, an authenticated user with base-create permission can attach a SQLite source pointing at an arbitrary file on the NocoDB host, including NocoDB's own internal databases. The SQLite client and the base/integration create services accepted a caller-supplied filename and passed it to fs.exists and fs.open('w') without restricting the location. A user could point a source at noco.db, at a tenant database under nc_minimal_dbs/, or at any writable path the NocoDB process can reach, and then read or overwrite its contents through the regular table APIs.This vulnerability is fixed in 2026.05.1. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, a stolen refresh token survived a password-forgot flow and could be used to mint fresh JWTs even after the user reset their password. passwordChange and passwordReset deleted the user's refresh tokens, but passwordForgot only rotated token_version and revoked OAuth tokens — it did not call UserRefreshToken.deleteAllUserToken(user.id). An attacker holding a captured refresh cookie could still exchange it for a new access token after the victim triggered the recovery flow. This vulnerability is fixed in 2026.05.1. |
| FOSSBilling is a billing and client management system that automates invoicing, payments, and communication for online service businesses. Versions 0.6.21 through 0.7.2 are vulnerable to IDOR through the support ticket creation workflow. By manipulating rel_id when rel_type=order, an authenticated client can create a support ticket that references another client's order they do not own. The ticketCreateForClient() method accepted rel_id without verifying order ownership for non-upgrade tasks, allowing clients to link a new ticket to another client's order by crafting the request. No cron task automatically processes cancel/upgrade requests from ticket relations; staff action is required. This affects integrity and confidentiality: staff could be misled into acting on the wrong order (e.g., cancellation or upgrade requests). While there is no client-to-client order data exposure, order IDs may appear in ticket context. This issue has been fixed in version 0.8.0. |
