| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations
Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of
temperature calculations") addressed a number of underflow situations
when writing temperature limits. However, it missed one situation, seen
when an attempt is made to set the hysteresis value to MAX_LONG and the
critical temperature limit is negative.
Use clamp_val() when setting the hysteresis temperature to ensure that
the provided value can never overflow or underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: elantech - fix stack out of bound access in elantech_change_report_id()
The array param[] in elantech_change_report_id() must be at least 3
bytes, because elantech_read_reg_params() is calling ps2_command() with
PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but
it's defined in the stack as an array of 2 bytes, therefore we have a
potential stack out-of-bounds access here, also confirmed by KASAN:
[ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0
[ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118
[ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110
[ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020
[ 6.512436] Workqueue: events_long serio_handle_event
[ 6.512453] Call Trace:
[ 6.512462] show_stack+0x52/0x58
[ 6.512474] dump_stack+0xa1/0xd3
[ 6.512487] print_address_description.constprop.0+0x1d/0x140
[ 6.512502] ? __ps2_command+0x372/0x7e0
[ 6.512516] __kasan_report.cold+0x7d/0x112
[ 6.512527] ? _raw_write_lock_irq+0x20/0xd0
[ 6.512539] ? __ps2_command+0x372/0x7e0
[ 6.512552] kasan_report+0x3c/0x50
[ 6.512564] __asan_load1+0x6a/0x70
[ 6.512575] __ps2_command+0x372/0x7e0
[ 6.512589] ? ps2_drain+0x240/0x240
[ 6.512601] ? dev_printk_emit+0xa2/0xd3
[ 6.512612] ? dev_vprintk_emit+0xc5/0xc5
[ 6.512621] ? __kasan_check_write+0x14/0x20
[ 6.512634] ? mutex_lock+0x8f/0xe0
[ 6.512643] ? __mutex_lock_slowpath+0x20/0x20
[ 6.512655] ps2_command+0x52/0x90
[ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse]
[ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse]
[ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse]
[ 6.512863] ? ps2_command+0x7f/0x90
[ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse]
[ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse]
[ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse]
[ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse]
[ 6.513122] ? phys_pmd_init+0x30e/0x521
[ 6.513137] elantech_init+0x8a/0x200 [psmouse]
[ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse]
[ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse]
[ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse]
[ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse]
[ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse]
[ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse]
[ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse]
[ 6.513519] ? mutex_unlock+0x22/0x40
[ 6.513526] ? ps2_command+0x7f/0x90
[ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse]
[ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse]
[ 6.513624] psmouse_connect+0x272/0x530 [psmouse]
[ 6.513669] serio_driver_probe+0x55/0x70
[ 6.513679] really_probe+0x190/0x720
[ 6.513689] driver_probe_device+0x160/0x1f0
[ 6.513697] device_driver_attach+0x119/0x130
[ 6.513705] ? device_driver_attach+0x130/0x130
[ 6.513713] __driver_attach+0xe7/0x1a0
[ 6.513720] ? device_driver_attach+0x130/0x130
[ 6.513728] bus_for_each_dev+0xfb/0x150
[ 6.513738] ? subsys_dev_iter_exit+0x10/0x10
[ 6.513748] ? _raw_write_unlock_bh+0x30/0x30
[ 6.513757] driver_attach+0x2d/0x40
[ 6.513764] serio_handle_event+0x199/0x3d0
[ 6.513775] process_one_work+0x471/0x740
[ 6.513785] worker_thread+0x2d2/0x790
[ 6.513794] ? process_one_work+0x740/0x740
[ 6.513802] kthread+0x1b4/0x1e0
[ 6.513809] ? set_kthread_struct+0x80/0x80
[ 6.513816] ret_from_fork+0x22/0x30
[ 6.513832] The buggy address belongs to the page:
[ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7
[ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 6.513860] raw: 0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/dbgfs: protect targets destructions with kdamond_lock
DAMON debugfs interface iterates current monitoring targets in
'dbgfs_target_ids_read()' while holding the corresponding
'kdamond_lock'. However, it also destructs the monitoring targets in
'dbgfs_before_terminate()' without holding the lock. This can result in
a use_after_free bug. This commit avoids the race by protecting the
destruction with the corresponding 'kdamond_lock'. |
| In the Linux kernel, the following vulnerability has been resolved:
habanalabs/gaudi: Fix a potential use after free in gaudi_memset_device_memory
Our code analyzer reported a uaf.
In gaudi_memset_device_memory, cb is get via hl_cb_kernel_create()
with 2 refcount.
If hl_cs_allocate_job() failed, the execution runs into release_cb
branch. One ref of cb is dropped by hl_cb_put(cb) and could be freed
if other thread also drops one ref. Then cb is used by cb->id later,
which is a potential uaf.
My patch add a variable 'id' to accept the value of cb->id before the
hl_cb_put(cb) is called, to avoid the potential uaf. |
| In the Linux kernel, the following vulnerability has been resolved:
net/nfc: fix use-after-free llcp_sock_bind/connect
Commits 8a4cd82d ("nfc: fix refcount leak in llcp_sock_connect()")
and c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
fixed a refcount leak bug in bind/connect but introduced a
use-after-free if the same local is assigned to 2 different sockets.
This can be triggered by the following simple program:
int sock1 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
int sock2 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
memset( &addr, 0, sizeof(struct sockaddr_nfc_llcp) );
addr.sa_family = AF_NFC;
addr.nfc_protocol = NFC_PROTO_NFC_DEP;
bind( sock1, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
bind( sock2, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
close(sock1);
close(sock2);
Fix this by assigning NULL to llcp_sock->local after calling
nfc_llcp_local_put.
This addresses CVE-2021-23134. |
| In the Linux kernel, the following vulnerability has been resolved:
rtw88: Fix array overrun in rtw_get_tx_power_params()
Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the
following array overrun is logged:
================================================================================
UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34
index 5 is out of range for type 'u8 [5]'
CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651
Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014
Workqueue: phy0 ieee80211_scan_work [mac80211]
Call Trace:
dump_stack+0x64/0x7c
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds.cold+0x43/0x48
rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]
? rtw_pci_read16+0x20/0x20 [rtw_pci]
? check_hw_ready+0x50/0x90 [rtw_core]
rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]
rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]
rtw_set_channel+0xab/0x110 [rtw_core]
rtw_ops_config+0x87/0xc0 [rtw_core]
ieee80211_hw_config+0x9d/0x130 [mac80211]
ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]
ieee80211_scan_work+0x19f/0x2a0 [mac80211]
process_one_work+0x1dd/0x3a0
worker_thread+0x49/0x330
? rescuer_thread+0x3a0/0x3a0
kthread+0x134/0x150
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x30
================================================================================
The statement where an array is being overrun is shown in the following snippet:
if (rate <= DESC_RATE11M)
tx_power = pwr_idx_2g->cck_base[group];
else
====> tx_power = pwr_idx_2g->bw40_base[group];
The associated arrays are defined in main.h as follows:
struct rtw_2g_txpwr_idx {
u8 cck_base[6];
u8 bw40_base[5];
struct rtw_2g_1s_pwr_idx_diff ht_1s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_2s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_3s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_4s_diff;
};
The problem arises because the value of group is 5 for channel 14. The trivial
increase in the dimension of bw40_base fails as this struct must match the layout of
efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set
the group for channel 14 to 4 if rate <= DESC_RATE11M.
This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines") |
| In the Linux kernel, the following vulnerability has been resolved:
drm: bridge/panel: Cleanup connector on bridge detach
If we don't call drm_connector_cleanup() manually in
panel_bridge_detach(), the connector will be cleaned up with the other
DRM objects in the call to drm_mode_config_cleanup(). However, since our
drm_connector is devm-allocated, by the time drm_mode_config_cleanup()
will be called, our connector will be long gone. Therefore, the
connector must be cleaned up when the bridge is detached to avoid
use-after-free conditions.
v2: Cleanup connector only if it was created
v3: Add FIXME
v4: (Use connector->dev) directly in if() block |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: set debugfs_name to NULL after it is freed
There is a upstream commit cffa4b2122f5("regmap:debugfs:
Fix a memory leak when calling regmap_attach_dev") that
adds a if condition when create name for debugfs_name.
With below function invoking logical, debugfs_name is
freed in regmap_debugfs_exit(), but it is not created again
because of the if condition introduced by above commit.
regmap_reinit_cache()
regmap_debugfs_exit()
...
regmap_debugfs_init()
So, set debugfs_name to NULL after it is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
When handling op->addr, it is using the buffer "tmpbuf" which has been
freed. This will trigger a use-after-free KASAN warning. Let's use
temporary variables to store op->addr.val and op->cmd.opcode to fix
this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix off by one in hdmi_14_process_transaction()
The hdcp_i2c_offsets[] array did not have an entry for
HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one
read overflow. I added an entry and copied the 0x0 value for the offset
from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c.
I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX
entries. This doesn't change the code, but it's just a belt and
suspenders approach to try future proof the code. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Fix shift-out-of-bounds in load_balance()
Syzbot reported a handful of occurrences where an sd->nr_balance_failed can
grow to much higher values than one would expect.
A successful load_balance() resets it to 0; a failed one increments
it. Once it gets to sd->cache_nice_tries + 3, this *should* trigger an
active balance, which will either set it to sd->cache_nice_tries+1 or reset
it to 0. However, in case the to-be-active-balanced task is not allowed to
run on env->dst_cpu, then the increment is done without any further
modification.
This could then be repeated ad nauseam, and would explain the absurdly high
values reported by syzbot (86, 149). VincentG noted there is value in
letting sd->cache_nice_tries grow, so the shift itself should be
fixed. That means preventing:
"""
If the value of the right operand is negative or is greater than or equal
to the width of the promoted left operand, the behavior is undefined.
"""
Thus we need to cap the shift exponent to
BITS_PER_TYPE(typeof(lefthand)) - 1.
I had a look around for other similar cases via coccinelle:
@expr@
position pos;
expression E1;
expression E2;
@@
(
E1 >> E2@pos
|
E1 >> E2@pos
)
@cst depends on expr@
position pos;
expression expr.E1;
constant cst;
@@
(
E1 >> cst@pos
|
E1 << cst@pos
)
@script:python depends on !cst@
pos << expr.pos;
exp << expr.E2;
@@
# Dirty hack to ignore constexpr
if exp.upper() != exp:
coccilib.report.print_report(pos[0], "Possible UB shift here")
The only other match in kernel/sched is rq_clock_thermal() which employs
sched_thermal_decay_shift, and that exponent is already capped to 10, so
that one is fine. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix overflows checks in provide buffers
Colin reported before possible overflow and sign extension problems in
io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing
useful, see d81269fecb8ce ("io_uring: fix provide_buffers sign extension").
Do that with help of check_<op>_overflow helpers. And fix struct
io_provide_buf::len type, as it doesn't make much sense to keep it
signed. |
| In the Linux kernel, the following vulnerability has been resolved:
ataflop: potential out of bounds in do_format()
The function uses "type" as an array index:
q = unit[drive].disk[type]->queue;
Unfortunately the bounds check on "type" isn't done until later in the
function. Fix this by moving the bounds check to the start. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-clt: destroy sysfs after removing session from active list
A session can be removed dynamically by sysfs interface "remove_path" that
eventually calls rtrs_clt_remove_path_from_sysfs function. The current
rtrs_clt_remove_path_from_sysfs first removes the sysfs interfaces and
frees sess->stats object. Second it removes the session from the active
list.
Therefore some functions could access non-connected session and access the
freed sess->stats object even-if they check the session status before
accessing the session.
For instance rtrs_clt_request and get_next_path_min_inflight check the
session status and try to send IO to the session. The session status
could be changed when they are trying to send IO but they could not catch
the change and update the statistics information in sess->stats object,
and generate use-after-free problem.
(see: "RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its
stats")
This patch changes the rtrs_clt_remove_path_from_sysfs to remove the
session from the active session list and then destroy the sysfs
interfaces.
Each function still should check the session status because closing or
error recovery paths can change the status. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Always enable the clk on resume
In mtk_iommu_runtime_resume always enable the clk, even
if m4u_dom is null. Otherwise the 'suspend' cb might
disable the clk which is already disabled causing the warning:
[ 1.586104] infra_m4u already disabled
[ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8
[ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops)
[ 1.598108] Modules linked in:
[ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69
[ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops)
[ 1.617487] Hardware name: Google Elm (DT)
[ 1.617491] Workqueue: pm pm_runtime_work
[ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops)
[ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
[ 1.659297] pc : clk_core_disable+0xb0/0xb8
[ 1.663475] lr : clk_core_disable+0xb0/0xb8
[ 1.667652] sp : ffff800011b9bbe0
[ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000
[ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98
[ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000
[ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90
[ 1.692189] x21: 000000000000000a x20: ffff0000c0048500
[ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff
[ 1.702804] x17: 0000000000000000 x16: 0000000000000000
[ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000
[ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720
[ 1.718727] x11: 0720072007200720 x10: 0720072007200720
[ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0
[ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328
[ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000
[ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298
[ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000
[ 1.750572] Call trace:
[ 1.753010] clk_core_disable+0xb0/0xb8
[ 1.756840] clk_core_disable_lock+0x24/0x40
[ 1.761105] clk_disable+0x20/0x30
[ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8
[ 1.769114] pm_generic_runtime_suspend+0x2c/0x48
[ 1.773815] __rpm_callback+0xe0/0x178
[ 1.777559] rpm_callback+0x24/0x88
[ 1.781041] rpm_suspend+0xdc/0x470
[ 1.784523] rpm_idle+0x12c/0x170
[ 1.787831] pm_runtime_work+0xa8/0xc0
[ 1.791573] process_one_work+0x1e8/0x360
[ 1.795580] worker_thread+0x44/0x478
[ 1.799237] kthread+0x150/0x158
[ 1.802460] ret_from_fork+0x10/0x30
[ 1.806034] ---[ end trace 82402920ef64573b ]---
[ 1.810728] ------------[ cut here ]------------
In addition, we now don't need to enable the clock from the
function mtk_iommu_hw_init since it is already enabled by the resume. |
| In the Linux kernel, the following vulnerability has been resolved:
net: marvell: prestera: fix port event handling on init
For some reason there might be a crash during ports creation if port
events are handling at the same time because fw may send initial
port event with down state.
The crash points to cancel_delayed_work() which is called when port went
is down. Currently I did not find out the real cause of the issue, so
fixed it by cancel port stats work only if previous port's state was up
& runnig.
The following is the crash which can be triggered:
[ 28.311104] Unable to handle kernel paging request at virtual address
000071775f776600
[ 28.319097] Mem abort info:
[ 28.321914] ESR = 0x96000004
[ 28.324996] EC = 0x25: DABT (current EL), IL = 32 bits
[ 28.330350] SET = 0, FnV = 0
[ 28.333430] EA = 0, S1PTW = 0
[ 28.336597] Data abort info:
[ 28.339499] ISV = 0, ISS = 0x00000004
[ 28.343362] CM = 0, WnR = 0
[ 28.346354] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100bf7000
[ 28.352842] [000071775f776600] pgd=0000000000000000,
p4d=0000000000000000
[ 28.359695] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 28.365310] Modules linked in: prestera_pci(+) prestera
uio_pdrv_genirq
[ 28.372005] CPU: 0 PID: 1291 Comm: kworker/0:1H Not tainted
5.11.0-rc4 #1
[ 28.378846] Hardware name: DNI AmazonGo1 A7040 board (DT)
[ 28.384283] Workqueue: prestera_fw_wq prestera_fw_evt_work_fn
[prestera_pci]
[ 28.391413] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
[ 28.397468] pc : get_work_pool+0x48/0x60
[ 28.401442] lr : try_to_grab_pending+0x6c/0x1b0
[ 28.406018] sp : ffff80001391bc60
[ 28.409358] x29: ffff80001391bc60 x28: 0000000000000000
[ 28.414725] x27: ffff000104fc8b40 x26: ffff80001127de88
[ 28.420089] x25: 0000000000000000 x24: ffff000106119760
[ 28.425452] x23: ffff00010775dd60 x22: ffff00010567e000
[ 28.430814] x21: 0000000000000000 x20: ffff80001391bcb0
[ 28.436175] x19: ffff00010775deb8 x18: 00000000000000c0
[ 28.441537] x17: 0000000000000000 x16: 000000008d9b0e88
[ 28.446898] x15: 0000000000000001 x14: 00000000000002ba
[ 28.452261] x13: 80a3002c00000002 x12: 00000000000005f4
[ 28.457622] x11: 0000000000000030 x10: 000000000000000c
[ 28.462985] x9 : 000000000000000c x8 : 0000000000000030
[ 28.468346] x7 : ffff800014400000 x6 : ffff000106119758
[ 28.473708] x5 : 0000000000000003 x4 : ffff00010775dc60
[ 28.479068] x3 : 0000000000000000 x2 : 0000000000000060
[ 28.484429] x1 : 000071775f776600 x0 : ffff00010775deb8
[ 28.489791] Call trace:
[ 28.492259] get_work_pool+0x48/0x60
[ 28.495874] cancel_delayed_work+0x38/0xb0
[ 28.500011] prestera_port_handle_event+0x90/0xa0 [prestera]
[ 28.505743] prestera_evt_recv+0x98/0xe0 [prestera]
[ 28.510683] prestera_fw_evt_work_fn+0x180/0x228 [prestera_pci]
[ 28.516660] process_one_work+0x1e8/0x360
[ 28.520710] worker_thread+0x44/0x480
[ 28.524412] kthread+0x154/0x160
[ 28.527670] ret_from_fork+0x10/0x38
[ 28.531290] Code: a8c17bfd d50323bf d65f03c0 9278dc21 (f9400020)
[ 28.537429] ---[ end trace 5eced933df3a080b ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix a use after free in siw_alloc_mr
Our code analyzer reported a UAF.
In siw_alloc_mr(), it calls siw_mr_add_mem(mr,..). In the implementation of
siw_mr_add_mem(), mem is assigned to mr->mem and then mem is freed via
kfree(mem) if xa_alloc_cyclic() failed. Here, mr->mem still point to a
freed object. After, the execution continue up to the err_out branch of
siw_alloc_mr, and the freed mr->mem is used in siw_mr_drop_mem(mr).
My patch moves "mr->mem = mem" behind the if (xa_alloc_cyclic(..)<0) {}
section, to avoid the uaf. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Only allow init netns to set default tcp cong to a restricted algo
tcp_set_default_congestion_control() is netns-safe in that it writes
to &net->ipv4.tcp_congestion_control, but it also sets
ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced.
This has the unintended side-effect of changing the global
net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it
is read-only: 97684f0970f6 ("net: Make tcp_allowed_congestion_control
readonly in non-init netns")
Resolve this netns "leak" by only allowing the init netns to set the
default algorithm to one that is restricted. This restriction could be
removed if tcp_allowed_congestion_control were namespace-ified in the
future.
This bug was uncovered with
https://github.com/JonathonReinhart/linux-netns-sysctl-verify |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid touching checkpointed data in get_victim()
In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR
mode to select victim:
1. LFS is set to find source section during GC, the victim should have
no checkpointed data, since after GC, section could not be set free for
reuse.
Previously, we only check valid chpt blocks in current segment rather
than section, fix it.
2. SSR | AT_SSR are set to find target segment for writes which can be
fully filled by checkpointed and newly written blocks, we should never
select such segment, otherwise it can cause panic or data corruption
during allocation, potential case is described as below:
a) target segment has 'n' (n < 512) ckpt valid blocks
b) GC migrates 'n' valid blocks to other segment (segment is still
in dirty list)
c) GC migrates '512 - n' blocks to target segment (segment has 'n'
cp_vblocks and '512 - n' vblocks)
d) If GC selects target segment via {AT,}SSR allocator, however there
is no free space in targe segment. |
| In the Linux kernel, the following vulnerability has been resolved:
ethernet:enic: Fix a use after free bug in enic_hard_start_xmit
In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside
enic_queue_wq_skb, if some error happens, the skb will be freed
by dev_kfree_skb(skb). But the freed skb is still used in
skb_tx_timestamp(skb).
My patch makes enic_queue_wq_skb() return error and goto spin_unlock()
incase of error. The solution is provided by Govind.
See https://lkml.org/lkml/2021/4/30/961. |
