| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: keep the readdir entry size 64-bit in fill_from_part()
fill_from_part() computes the size of a directory entry in size_t but
stores it in a __u32. An entry length near U32_MAX wraps it to a small
value, bypasses the bounds check, and is then used to index the entry,
reading far past the directory part -- an out-of-bounds read that oopses
the kernel.
Compute the size as a u64 so it cannot truncate; the bounds check then
rejects the entry. The trailer is supplied by the userspace client. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, fix matcher leak on resize target setup failure
hws_bwc_matcher_move() allocates a replacement matcher before setting it
as the resize target. If mlx5hws_matcher_resize_set_target() fails, the
replacement matcher is not attached anywhere and is leaked.
Fix the leak by destroying the replacement matcher before returning from
the resize-target failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
mlx5 HWS-capable device to test with, no runtime testing was able to be
performed. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD
The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus
after entering Device-Initiated Slumber during idle. With the default
med_power_with_dipm policy the link goes down (SStatus 1 SControl 300)
and does not recover, forcing the filesystem read-only. Forcing
max_performance keeps the link stable across prolonged idle.
Add a NOLPM quirk so link power management is disabled for this drive
specifically, leaving it intact for other devices on the host. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-core: Reject an invalid concurrent positioning ranges count
ata_dev_config_cpr() takes the number of range descriptors from buf[0]
of the concurrent positioning ranges log (up to 255), which the device
reports independently of the log size in the GPL directory. The count is
then walked at a fixed 32-byte stride in two places with no bound: the
log read here, and the INQUIRY VPD page B9h emitter, which writes one
descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device
reporting a count larger than its own log overflows the read buffer (up
to 7704 bytes past a 512-byte slab), and a count above 62 overflows the
response buffer on the emit side.
Bound the count once, on probe, against both the log the device returned
and the number of descriptors the VPD B9h response buffer can hold
(ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range
count with a warning; this keeps the emitter in bounds with no separate
change there. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: bound device offsets in the MUX downlink decoder
mux_dl_adb_decode() walks a chain of aggregated datagram tables using
offsets and lengths taken from the modem. first_table_index,
next_table_index, table_length, datagram_index and datagram_length are
all device supplied le values. Only first_table_index was checked, and
only for being non zero. The decoder then formed adth = block +
adth_index and read the table header and the datagram entries with no
bound against the received skb. A modem that reports an index or a
length past the downlink buffer makes the decoder read out of bounds.
The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most
that, so skb->len is the real limit, but none of these in band offsets
were checked against it.
The table chain is also followed with no forward progress check. The loop
takes the next table from adth->next_table_index and stops only when that
reaches zero. A modem can stage two tables that point at each other, so
the loop never ends. It runs in softirq and clones the skb on every pass.
Validate every device offset and length against skb->len before use.
The block header must fit. Each table header, on entry and after every
next_table_index, must lie inside the skb. The datagram table must fit.
Each datagram index and length must stay inside the skb. The header
padding must not exceed the datagram length so the receive length does
not wrap. Require each next_table_index to move forward so the chain
cannot cycle.
This was reproduced under KASAN as a slab out of bounds read on a normal
downlink receive once the iosm net device is up. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: probes: save original sp in rethook trampoline
Reading a word from the stack in a kretprobe crashes a risc-v kernel.
$ cd /sys/kernel/tracing/
$ echo 'r n_tty_write $stack0' > dynamic_events
$ echo 1 > events/kprobes/enable
Unable to handle kernel paging request at virtual address 0000000200000128
...
[<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38
[<ffffffff80177196>] process_fetch_insn+0x3ee/0x760
[<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0
[<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58
[<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90
[<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108
[<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c
[<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94
[<ffffffff8067872a>] tty_write+0x1a/0x30
In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value.
arch_rethook_trampoline saves the registers from the probed function in a
struct pt_regs. sp is not saved. Instead, sp is decremented for
arch_rethook_trampoline's local stack.
Fix this crash and save the original sp along with the other registers.
Use a0 as a temporary register, it is overwritten anyway.
[pjw@kernel.org: added Fixes tag; cc'ed stable] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/compaction: handle free_pages_prepare() properly in compaction_free()
free_pages_prepare() can fail but compaction_free() does not handle the
failure case. Failed pages should not be added back to cc->freepages for
future use, since they can be either PageHWPoison or free_page_is_bad()
and might cause data corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure
imsic_early_acpi_init() allocates a firmware node before setting up the
IMSIC state. If imsic_setup_state() fails, the function returns without
freeing the allocated fwnode.
Free the fwnode and clear the global pointer on this error path, matching
the cleanup already done when imsic_early_probe() fails.
[ tglx: Use a common cleanup path instead of copying code around ] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/monwriter: Reject buffer reuse with different data length
When data buffers are reused, e.g. for interval sample records, the
first record determines the data length, and the size of the buffer for
user copy. Current monwriter code does not check if the data length was
changed for subsequent records, which also would never happen for valid
user programs.
However, a malicious user could change the data length, resulting in out
of bounds user copy to the kernel buffer, and memory corruption. By
default, the monwriter misc device is created with root-only permissions,
so practical impact is typically low.
Fix this by checking for changed data length and rejecting such records. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: remove interfaces with RCU list deletion
Queue wake, stop, and disable paths walk local->interfaces under RCU.
The bulk hardware teardown path removes entries with list_del(), so an
asynchronous transmit completion can follow a poisoned list node in
ieee802154_wake_queue().
Use list_del_rcu() as in the single-interface removal path. The following
unregister_netdevice() waits for in-flight RCU readers before freeing the
netdevice, so no separate grace-period wait is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix SQB pointer leak on init failure
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
OcteonTX2 PF device and the corresponding AF mailbox setup to test with,
no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
llc: fix SAP refcount leak in llc_ui_autobind()
llc_ui_autobind() opens a SAP after choosing a dynamic LSAP.
llc_sap_open() returns a reference owned by the caller, and
llc_sap_add_socket() takes a second reference for the socket's
membership in the SAP hash tables.
llc_ui_bind() drops the caller's reference after adding the socket,
but llc_ui_autobind() keeps it. When the socket is closed,
llc_sap_remove_socket() releases only the socket reference, leaving
the SAP on llc_sap_list with sk_count == 0.
This is user-visible because repeated autobind and close cycles can consume
all dynamic SAP values and make later autobinds fail with -EUSERS.
Drop the caller's reference after a successful autobind, matching
llc_ui_bind()'s ownership model. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: use parsed transport offset in SCTP state lookup
set_sctp_state() reads the SCTP chunk header again in order to drive the
IPVS SCTP state table. For IPv6 it computes the offset with
sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from
ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped
extension headers and found the real transport header.
This makes the state machine read from the wrong offset for IPv6 SCTP
packets that carry extension headers. For example, an INIT packet with an
8-byte destination options header can be scheduled correctly by
sctp_conn_schedule(), but set_sctp_state() reads the first byte of the
SCTP verification tag as a DATA chunk type. The connection then moves
from NONE to ESTABLISHED instead of INIT1, gets the longer established
timeout, and updates the active/inactive destination counters
incorrectly. This happens even though the SCTP handshake has not
completed.
Use the parsed transport offset passed down from ip_vs_set_state() for
the SCTP chunk-header lookup. For IPv4 and IPv6 packets without
extension headers this preserves the existing offset. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: don't read an unset MAC header in macsec_encrypt()
macsec_encrypt() reads the Ethernet header via eth_hdr(skb)
(skb->head + skb->mac_header) to memmove() the 12 source/destination MAC
bytes forward and make room for the SecTAG.
On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb
reaches the macsec ndo_start_xmit() with the MAC header unset, so
eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of
bounds: a 12-byte heap over-read that is also emitted on the wire as the
frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds
read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET
build flags it as an unset mac header in skb_mac_header().
On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added
by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in
macvlan_broadcast()") for exactly this purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: loopback: validate offset and size in move_data()
The loopback move_data() performs a memcpy into the registered DMB
without checking whether offset + size exceeds the DMB length. Unlike
real ISM hardware, which enforces memory region bounds natively, the
software loopback has no such protection.
A peer-supplied out-of-bounds offset or oversized write would result in
an OOB write past the allocated kernel buffer. Add an explicit bounds
check before the memcpy to reject such requests with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: drop in-flight Tx SKBs on close
The MACB driver has since forever leaked the outgoing SKBs that
have not yet been marked as completed. They live in queue->tx_skb
which gets freed without remorse nor checking.
macb_free_consistent() gets called in a few codepaths, but only close will
trigger the added expressions. In macb_open() and macb_alloc_consistent()
failure cases, queues' tx_skb just got allocated and are empty. |
| In the Linux kernel, the following vulnerability has been resolved:
cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable()
On arm64, when booting with `maxcpus` greater than the number of present
CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present'
but have not yet been registered via register_cpu(). Consequently,
the per-cpu device objects for these CPUs are not yet initialized.
In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling
_cpu_up() for these unregistered CPUs eventually leads to
sysfs_create_group() being called with a NULL kobject (or a kobject
without a directory), triggering the following warning in
fs/sysfs/group.c:
WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181
[...]
Call trace:
internal_create_group+0x41c/0x4bc (P)
sysfs_create_group+0x18/0x24
topology_add_dev+0x1c/0x28
cpuhp_invoke_callback+0x104/0x20c
__cpuhp_invoke_callback_range+0x94/0x11c
_cpu_up+0x200/0x37c
When booting with ACPI, arm64 smp_prepare_cpus() currently sets all
enumerated CPUs as "present" regardless of their status in the MADT. This
causes issues with SMT hotplug control. For instance, with QEMU's
"-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as
follows:
1. The first four CPUs: `Enabled` set but `Online Capable` not set.
2. The remaining four CPUs: `Online Capable` set but `Enabled` not set
to support potential hot-plugging.
Fix this by:
1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC
entry before calling set_cpu_present() during SMP initialization.
2. Properly managing the present mask in acpi_map_cpu() and
acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with
other architectures like x86 and LoongArch.
3. Update the arm64 CPU hotplug documentation to no longer state that all
online-capable vCPUs are marked as present by the kernel at boot time.
This ensures that only physically available or explicitly enabled CPUs
are in the present mask, keeping the SMT control logic consistent with
the actual hardware state. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: reject data replies with an out-of-range payload size
recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an
outstanding read request. The peer-supplied payload length reaches it as
the signed int data_size, and two peer-controlled inputs can make it
negative. With a negotiated data-integrity-alg the digest length is
subtracted first, so a reply whose payload is smaller than the digest
underflows data_size. With no integrity algorithm (the default) data_size
is assigned from the unsigned h95/h100 wire length and drbdd() never
bounds it for a payload-carrying command, so a length above INT_MAX casts
it negative; this path needs no non-default feature. The bio receive loop
then computes expect = min_t(int, data_size, bv_len), which is negative,
and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX
into the first mapped page.
The sibling receive path read_in_block() is not affected: it uses an
unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving.
Reject a data reply whose size is negative after the optional digest
subtraction, covering both triggers.
Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen
bytes past a bio page in the receiver, corrupting kernel memory. A node
that reads from its peer (a diskless node, or read-balancing to the peer)
is exposed in the default configuration; data-integrity-alg is not
required. |
