| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vitess is a database clustering system for horizontal scaling of MySQL. Prior to versions 23.0.3 and 22.0.4, anyone with read/write access to the backup storage location (e.g. an S3 bucket) can manipulate backup manifest files so that arbitrary code is later executed when that backup is restored. This can be used to provide that attacker with unintended/unauthorized access to the production deployment environment — allowing them to access information available in that environment as well as run any additional arbitrary commands there. Versions 23.0.3 and 22.0.4 contain a patch. Some workarounds are available. Those who intended to use an external decompressor then can always specify that decompressor command in the `--external-decompressor` flag value for `vttablet` and `vtbackup`. That then overrides any value specified in the manifest file. Those who did not intend to use an external decompressor, nor an internal one, can specify a value such as `cat` or `tee` in the `--external-decompressor` flag value for `vttablet` and `vtbackup` to ensure that a harmless command is always used. |
| Fleet is open source device management software. In versions prior to 4.80.1, Fleet generated device lock and wipe PINs using a predictable algorithm based solely on the current Unix timestamp. Because no secret key or additional entropy was used, the resulting PIN could potentially be derived if the approximate time the device was locked is known. Fleet’s device lock and wipe commands generate a 6-digit PIN that is displayed to administrators for unlocking a device. In affected versions, this PIN was deterministically derived from the current timestamp. An attacker with physical possession of a locked device and knowledge of the approximate time the lock command was issued could theoretically predict the correct PIN within a limited search window. However, successful exploitation is constrained by multiple factors: Physical access to the device is required, the approximate lock time must be known, the operating system enforces rate limiting on PIN entry attempts, attempts would need to be spread over, and device wipe operations would typically complete before sufficient attempts could be made. As a result, this issue does not allow remote exploitation, fleet-wide compromise, or bypass of Fleet authentication controls. Version 4.80.1 contains a patch. No known workarounds are available. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the On-Box Anomaly detection framework of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to execute code as root.
The On-Box Anomaly detection framework should only be reachable by other internal processes over the internal routing instance, but not over an externally exposed port. With the ability to access and manipulate the service to execute code as root a remote attacker can take complete control of the device.
Please note that this service is enabled by default as no specific configuration is required.
This issue affects Junos OS Evolved on PTX Series:
* 25.4 versions before 25.4R1-S1-EVO, 25.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 25.4R1-EVO.
This issue does not affect Junos OS. |
| Fleet is open source device management software. A SQL injection vulnerability in versions prior to 4.80.1 allowed authenticated users to inject arbitrary SQL expressions via the `order_key` query parameter. Due to unsafe use of `goqu.I()` when constructing the `ORDER BY` clause, specially crafted input could escape identifier quoting and be interpreted as executable SQL. An authenticated attacker with access to the affected endpoint could inject SQL expressions into the underlying MySQL query. Although the injection occurs in an `ORDER BY` context, it is sufficient to enable blind SQL injection techniques that can disclose database information through conditional expressions that affect result ordering. Crafted expressions may also cause excessive computation or query failures, potentially leading to degraded performance or denial of service. No direct evidence of reliable data modification or stacked query execution was demonstrated. Version 4.80.1 fixes the issue. If an immediate upgrade is not possible, users should restrict access to the affected endpoint to trusted roles only and ensure that any user-supplied sort or column parameters are strictly allow-listed at the application or proxy layer. |
| Fleet is open source device management software. In versions prior to 4.80.1, a vulnerability in Fleet’s configuration API could expose Google Calendar service account credentials to authenticated users with low-privilege roles. This may allow unauthorized access to Google Calendar resources associated with the service account. Fleet returns configuration data through an API endpoint that is accessible to authenticated users, including those with the lowest-privilege “Observer” role. In affected versions, Google Calendar service account credentials were not properly obfuscated before being returned. As a result, a low-privilege user could retrieve the service account’s private key material. Depending on how the Google Calendar integration is configured, this could allow unauthorized access to calendar data or other Google Workspace resources associated with the service account. This issue does not allow escalation of privileges within Fleet or access to device management functionality. Version 4.80.1 patches the issue. If an immediate upgrade is not possible, administrators should remove the Google Calendar integration from Fleet and rotate the affected Google service account credentials. |
| The Dart and Flutter SDKs provide software development kits for the Dart programming language. In versions of the Dart SDK prior to 3.11.0 and the Flutter SDK prior to version 3.41.0, when the pub client (`dart pub` and `flutter pub`) extracts a package in the pub cache, a malicious package archive can have files extracted outside the destination directory in the `PUB_CACHE`. A fix has been landed in commit 26c6985c742593d081f8b58450f463a584a4203a. By normalizing the file path before writing file, the attacker can no longer traverse up via a symlink. This patch is released in Dart 3.11.0 and Flutter 3.41.0.vAll packages on pub.dev have been vetted for this vulnerability. New packages are no longer allowed to contain symlinks. The pub client itself doesn't upload symlinks, but duplicates the linked entry, and has been doing this for years. Those whose dependencies are all from pub.dev, third-party repositories trusted to not contain malicious code, or git dependencies are not affected by this vulnerability. |
| A weakness has been identified in feiyuchuixue sz-boot-parent up to 1.3.2-beta. This vulnerability affects unknown code of the file /api/admin/common/files/download. Executing a manipulation of the argument url can lead to server-side request forgery. The attack can be executed remotely. Attacks of this nature are highly complex. It is stated that the exploitability is difficult. Upgrading to version 1.3.3-beta is able to resolve this issue. This patch is called aefaabfd7527188bfba3c8c9eee17c316d094802. Upgrading the affected component is advised. The project was informed beforehand and acted very professional: "We have added a URL protocol whitelist validation to the file download interface, allowing only http and https protocols." |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper processing when parsing SNMP requests. An attacker could exploit this vulnerability by continuously sending SNMP queries to a specific MIB of an affected device. A successful exploit could allow the attacker to cause a kernel panic on the device, resulting in a reload and a DoS condition.
Note: This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv1 or SNMPv2c, the attacker must have a valid read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious data into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid credentials for a user account with the role of Administrator or AAA Administrator. |
| Ethereum Name Service (ENS) is a distributed, open, and extensible naming system based on the Ethereum blockchain. In versions 1.6.2 and prior, the `RSASHA256Algorithm` and `RSASHA1Algorithm` contracts fail to validate PKCS#1 v1.5 padding structure when verifying RSA signatures. The contracts only check if the last 32 (or 20) bytes of the decrypted signature match the expected hash. This enables Bleichenbacher's 2006 signature forgery attack against DNS zones using RSA keys with low public exponents (e=3). Two ENS-supported TLDs (.cc and .name) use e=3 for their Key Signing Keys, allowing any domain under these TLDs to be fraudulently claimed on ENS without DNS ownership. Apatch was merged at commit c76c5ad0dc9de1c966443bd946fafc6351f87587. Possible workarounds include deploying the patched contracts and pointing DNSSECImpl.setAlgorithm to the deployed contract. |
| LORIS (Longitudinal Online Research and Imaging System) is a self-hosted web application that provides data- and project-management for neuroimaging research. Prior to versions 26.0.5, 27.0.2, and 28.0.0, an authenticated user with sufficient privileges can exploit a path traversal vulnerability to upload a malicious file to an arbitrary location on the server. Once uploaded, the file can be used to achieve remote code execution (RCE). An attacker must be authenticated and have the appropriate permissions to exploit this issue. If the server is configured as read-only, remote code execution (RCE) is not possible; however, the malicious file upload may still be achievable. This problem is fixed in LORIS v26.0.5 and above, v27.0.2 and above, and v28.0.0 and above. As a workaround, LORIS administrators can disable the media module if it is not being used. |
| TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. A vulnerability in versions prior to 2.01 allows unauthenticated remote attackers to bypass the web server's CGI parameter security controls. Depending on the server configuration and the specific CGI executable in use, the impact is either source code disclosure or remote code execution (RCE). Anyone hosting CGI scripts (particularly interpreted languages like PHP) using vulnerable versions of TinyWeb is impacted. The problem has been patched in version 2.01. If upgrading is not immediately possible, ensure `STRICT_CGI_PARAMS` is enabled (it is defined by default in `define.inc`) and/or do not use CGI executables that natively accept dangerous command-line flags (such as `php-cgi.exe`). If hosting PHP, consider placing the server behind a Web Application Firewall (WAF) that explicitly blocks URL query string parameters that begin with a hyphen (`-`) or contain encoded double quotes (`%22`). |
| LangChain is a framework for building LLM-powered applications. Prior to version 1.1.8, a redirect-based Server-Side Request Forgery (SSRF) bypass exists in `RecursiveUrlLoader` in `@langchain/community`. The loader validates the initial URL but allows the underlying fetch to follow redirects automatically, which permits a transition from a safe public URL to an internal or metadata endpoint without revalidation. This is a bypass of the SSRF protections introduced in 1.1.14 (CVE-2026-26019). Users should upgrade to `@langchain/community` 1.1.18, which validates every redirect hop by disabling automatic redirects and re-validating `Location` targets before following them. In this version, automatic redirects are disabled (`redirect: "manual"`), each 3xx `Location` is resolved and validated with `validateSafeUrl()` before the next request, and a maximum redirect limit prevents infinite loops. |
| Storybook is a frontend workshop for building user interface components and pages in isolation. Prior to versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10, the WebSocket functionality in Storybook's dev server, used to create and update stories, is vulnerable to WebSocket hijacking. This vulnerability only affects the Storybook dev server; production builds are not impacted. Exploitation requires a developer to visit a malicious website while their local Storybook dev server is running. Because the WebSocket connection does not validate the origin of incoming connections, a malicious site can silently send WebSocket messages to the local instance without any further user interaction. If the Storybook dev server is intentionally exposed publicly (e.g. for design reviews or stakeholder demos) the risk is higher, as no malicious site visit is required. Any unauthenticated attacker can send WebSocket messages to it directly. The vulnerability affects the WebSocket message handlers for creating and saving stories. Both are vulnerable to injection via unsanitized input in the componentFilePath field, which can be exploited to achieve persistent XSS or Remote Code Execution (RCE). Versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10 contain a fix for the issue. |
| VMware Aria Operations contains a command injection vulnerability. A malicious unauthenticated actor may exploit this issue to execute arbitrary commands which may lead to remote code execution in VMware Aria Operations while support-assisted product migration is in progress.
To remediate CVE-2026-22719, apply the patches listed in the 'Fixed Version' column of the ' Response Matrix https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947 ' in VMSA-2026-0001
Workarounds for CVE-2026-22719 are documented in the 'Workarounds' column of the ' Response Matrix https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947 ' in VMSA-2026-0001 |
| The User Registration & Membership – Custom Registration Form, Login Form, and User Profile plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.2 via the 'register_member' function, due to missing validation on the 'member_id' user controlled key. This makes it possible for unauthenticated attackers to delete arbitrary user accounts that newly registered on the site who has the 'urm_user_just_created' user meta set. |
| Sub2API is an AI API gateway platform designed to distribute and manage API quotas from AI product subscriptions. A vulnerability in versions prior to 0.1.85 is a Password Reset Poisoning (Host Header / Forwarded Header trust issue), which allows attackers to manipulate the password reset link. Attackers can exploit this flaw to inject their own domain into the password reset link, leading to the potential for account takeover. The vulnerability has been fixed in version v0.1.85. If upgrading is not immediately possible, users can mitigate the vulnerability by disabling the "forgot password" feature until an upgrade to a patched version can be performed. This will prevent attackers from exploiting the vulnerability via the affected endpoint. |
| A flaw was found in the FTP GVfs backend. A remote attacker could exploit this input validation vulnerability by supplying specially crafted file paths containing carriage return and line feed (CRLF) sequences. These unsanitized sequences allow the attacker to terminate intended FTP commands and inject arbitrary FTP commands, potentially leading to arbitrary code execution or other severe impacts. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, TL4 users can publish topics into staff-only categories via the `publish_to_category` topic timer, bypassing authorization checks. Versions 2025.12.2, 2026.1.1, and 2026.2.0 patch the issue. No known workarounds are available. |
| Charging station authentication identifiers are publicly accessible via web-based mapping platforms. |
